Final Audio E1000C In-Ear Headphones Instruction Manual

Introduction

Thank you for choosing the Final Audio E1000C In-Ear Headphones. These headphones are designed to deliver precise audio reproduction with the convenience of an integrated microphone for communication. This manual provides essential information for the proper setup, operation, and maintenance of your E1000C headphones.

Key Features

• Dynamic Drivers: Equipped with 6.4mm dynamic drivers for detailed sound reproduction.
• Integrated Microphone and Remote: Allows for hands-free calls and convenient control of audio playback.
• Oxygen-Free Copper Cable: Designed to minimize electromagnetic interference (EMI) noise for clearer audio.
• Interchangeable Silicone Ear Tips: Includes 5 sizes (SS/S/M/L/LL) for a personalized and comfortable fit, enhancing sound isolation.
• Lightweight and Durable Design: Constructed with lightweight ABS plastic housing and a flexible cable for everyday reliability.
• Wired Connectivity: Standard 3.5mm jack for broad compatibility with various devices.
• 16 Ohm Impedance: Optimized for higher volume playback with portable devices.

Package Contents

The Final Audio E1000C package includes:

• Final Audio E1000C In-Ear Headphones with integrated cable and microphone.
• Interchangeable silicone ear tips (5 sizes: SS/S/M/L/LL).

Setup

1. Ear Tip Selection and Installation

Choosing the correct ear tip size is crucial for both comfort and optimal sound quality, including bass response and sound isolation. Experiment with the different sizes provided (SS, S, M, L, LL) to find the best fit for your ears.

1. Gently remove the pre-installed ear tips by pulling them off the earphone nozzle.
2. Select a pair of ear tips that feel comfortable and create a good seal in your ear canal.
3. Carefully push the chosen ear tips onto the earphone nozzle until they are securely attached.

Image: Awarded Ear Tips. The E1000C comes with five sizes of silicone ear tips to ensure a perfect and comfortable fit for various ear shapes, optimizing sound delivery and isolation.

2. Connecting to a Device

The E1000C headphones use a standard 3.5mm audio jack for connectivity.

1. Locate the 3.5mm headphone jack on your smartphone, MP3 player, or other compatible audio device.
2. Insert the 3.5mm plug of the E1000C cable firmly into the device's headphone jack.
3. Ensure the connection is secure to prevent audio interruptions.

Image: Strong & Flexible Cable. The durable, tangle-free cable with its L-shaped 3.5mm plug ensures a reliable connection and longevity.

Operating Instructions

1. Basic Playback and Call Control

The E1000C features an in-line remote and microphone for convenient control.

• Play/Pause: Press the button once to play or pause audio.
• Next Track: Press the button twice quickly to skip to the next track.
• Previous Track: Press the button three times quickly to go back to the previous track.
• Answer/End Call: Press the button once to answer an incoming call or end an ongoing call.
• Reject Call: Press and hold the button for a few seconds to reject an incoming call.
• Voice Assistant: Press and hold the button to activate your device's voice assistant (e.g., Siri, Google Assistant).

Image: Mic & Smart Controller. The in-line controller allows for easy management of phone calls and music playback without needing to access your device.

2. Proper Wearing

For the best audio experience and comfort, insert the earphones gently into your ear canals. The cable can be worn straight down or over the ear, depending on your preference. Wearing the cable over the ear can reduce microphonics (noise from the cable rubbing against clothing).

Maintenance

1. Cleaning

Regular cleaning helps maintain hygiene and sound quality.

• Ear Tips: Remove the silicone ear tips and wash them gently with mild soap and water. Rinse thoroughly and allow them to dry completely before reattaching.
• Earphone Body: Wipe the earphone body and cable with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Nozzles: Carefully remove any earwax or debris from the earphone nozzles using a small, soft brush or a cotton swab. Ensure no moisture enters the driver unit.

2. Storage

Proper storage extends the lifespan of your headphones.

• Store the headphones in a clean, dry place away from direct sunlight and extreme temperatures.
• Avoid tangling the cable by coiling it loosely when not in use.
• Do not expose the headphones to excessive force or pressure.

Troubleshooting

If you encounter issues with your E1000C headphones, refer to the following common solutions:

• No Sound:
  • Ensure the 3.5mm jack is fully inserted into your device.
  • Check the volume level on your audio device.
  • Test the headphones with another audio source to rule out device issues.
• Poor Sound Quality (e.g., weak bass, muffled sound):
  • Verify that the ear tips are correctly sized and creating a good seal in your ear canal.
  • Ensure the earphone nozzles are clean and free of debris.
  • Check for any damage to the cable or connector.
• Microphone Not Working:
  • Ensure the 3.5mm jack is fully inserted. Some devices require a TRRS (4-pole) jack for microphone functionality, which the E1000C provides.
  • Check your device's audio input settings to ensure the external microphone is selected.
  • Test the microphone with another device if possible.

Specifications

Warranty and Support

Final Audio products are manufactured to high-quality standards. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official Final Audio website. If you require technical assistance or have questions not covered in this manual, please contact Final Audio customer support through their official channels.

For further information and product registration, please visit: Final Audio Store on Amazon