TRESKO Hot Beverage Dispenser 10L / 1500W Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your TRESKO Hot Beverage Dispenser. Please read it thoroughly before first use and keep it for future reference. This appliance is designed for heating and keeping warm various beverages such as mulled wine, punch, tea, and coffee.

Key features include a 10-liter capacity, 1500W heating power, and a continuous temperature range of 30°C to 110°C. Its stainless steel construction ensures taste neutrality, and it is equipped with an integrated tap, water level indicator, and safety features like overheat protection.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the appliance:

• Ensure the voltage indicated on the appliance matches your local power supply before connecting.
• Do not immerse the appliance, cord, or plug in water or any other liquid.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Always supervise children to ensure they do not play with the appliance.
• Do not operate the appliance if it is empty. Dry-run protection is integrated, but continuous operation without liquid can cause damage.
• The surfaces of the appliance become hot during use. Use caution when handling and only touch the handles.
• Place the appliance on a stable, level, and heat-resistant surface, away from edges and out of reach of children.
• Do not use the appliance for heating milk or thick liquids like cocoa, as these can burn and stick to the bottom, causing damage and making cleaning difficult.
• Unplug the appliance from the power outlet when not in use and before cleaning. Allow it to cool completely before handling or cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.

3. Product Components

Familiarize yourself with the parts of your TRESKO Hot Beverage Dispenser:

• Main Unit: Stainless steel body with double-walled insulation.
• Lid: Removable lid for filling and heat retention.
• Handles: Heat-resistant carrying handles for safe transport.
• Temperature Control Dial: For setting the desired temperature (30°C - 110°C).
• On/Off Switch: Main power switch with splash protection.
• Heating Indicator Light: Illuminates when the appliance is actively heating.
• Keep Warm Indicator Light: Illuminates when the appliance is maintaining the set temperature.
• Water Level Indicator: Transparent strip on the front to monitor liquid volume.
• Dispensing Tap: Integrated tap for serving beverages, with continuous flow option.

4. Setup

1. Unpack: Carefully remove the appliance and all accessories from the packaging. Retain packaging for future storage or transport.
2. Inspect: Check the appliance for any signs of damage. Do not use if damaged.
3. Initial Cleaning: Before first use, clean the interior of the dispenser with warm water and a mild detergent. Rinse thoroughly with clean water. Wipe the exterior with a damp cloth. Ensure all parts are dry before use.
4. Placement: Place the dispenser on a firm, level, and heat-resistant surface. Ensure there is adequate space around the unit for ventilation and safe operation.
5. Tap Position: Ensure the dispensing tap is in the closed position before filling.

5. Operating Instructions

1. Fill the Dispenser: Open the lid and pour the desired beverage into the dispenser. Do not exceed the maximum fill line indicated on the water level gauge.
2. Close the Lid: Securely place the lid back on the dispenser.
3. Connect to Power: Plug the power cord into a suitable 220V - 50Hz electrical outlet.
4. Set Temperature: Turn the temperature control dial to your desired temperature between 30°C and 110°C.
5. Turn On: Flip the On/Off switch to the 'On' position. The 'Heating' indicator light will illuminate, signifying that the appliance is actively heating the beverage.
6. Heating Process: The appliance will heat the beverage to the set temperature. Once the temperature is reached, the 'Heating' light may turn off, and the 'Keep Warm' light will illuminate, indicating that the dispenser is maintaining the temperature.
7. Dispensing: To dispense a beverage, place a cup under the tap and push the tap lever down. For continuous flow, pull the tap lever forward and lock it into position. Push it back to close.
8. Turn Off: After use, flip the On/Off switch to the 'Off' position and unplug the appliance from the power outlet.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your dispenser.

1. Safety First: Always unplug the appliance and allow it to cool completely before cleaning.
2. Interior Cleaning: Wash the interior of the dispenser with warm water and a mild, non-abrasive detergent. Use a soft sponge or cloth. Rinse thoroughly with clean water to remove all soap residue.
3. Exterior Cleaning: Wipe the exterior of the appliance with a damp cloth. Do not use abrasive cleaners or scouring pads, as these can scratch the stainless steel finish.
4. Tap Cleaning: Regularly clean the dispensing tap. You can run warm, soapy water through it, then rinse with clean water. For thorough cleaning, the tap may be disassembled according to specific instructions (if provided with the tap itself, not detailed here).
5. Descaling: Over time, mineral deposits (limescale) may build up, especially in hard water areas. To descale, fill the dispenser with a solution of water and white vinegar (e.g., 1 part vinegar to 2 parts water) or a commercial descaling agent. Heat the solution to about 60°C and let it stand for 30-60 minutes (do not boil). Drain the solution and rinse the interior thoroughly several times with clean water.
6. Storage: Store the clean and dry appliance in a cool, dry place.

7. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

8. Specifications

• Brand: TRESKO
• Model Number: EKATM10
• Capacity: 10 Liters
• Power: 1500 Watts
• Voltage: 220 Volts
• Frequency: 50 Hz
• Temperature Range: 30°C - 110°C
• Material: Stainless Steel
• Approximate Dimensions (H x W x D): 53 cm x 29 cm x 29 cm
• Power Cable Length: Approximately 1.25 meters
• Color: Silver

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.