1. Introduction
This manual provides comprehensive instructions for the use and maintenance of your Hitachi RC43141 30100945 original remote control. This remote is specifically designed for various Hitachi Smart LED TV models released between 2018 and 2019. It offers direct access to essential TV functions and popular streaming services.
The remote control features an ergonomic design for comfortable handling and utilizes infrared technology for reliable communication with your television.
2. Setup
2.1 Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch (if present) to open the compartment.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover securely.
Note: Batteries are not included and must be purchased separately. Always use new batteries for optimal performance.
2.2 Initial Use
This Hitachi RC43141 remote control requires no programming or complex setup. Once the batteries are correctly installed, it is ready for immediate use with compatible Hitachi Smart LED TVs.
3. Operating Instructions
Point the remote control directly at the infrared receiver on your Hitachi Smart LED TV. Ensure there are no obstructions between the remote and the TV.
3.1 Key Functions Overview

Figure 1: Top-down view of the Hitachi RC43141 remote control, displaying all buttons including power, number pad, volume, channel, navigation, and dedicated app buttons.
- Power Button (⏻): Turns the TV on or off.
- Number Pad (0-9): For direct channel selection or inputting numbers.
- Volume Up/Down (V+/V-): Adjusts the sound volume.
- Channel Up/Down (P+/P-): Changes TV channels.
- Mute (🔇): Mutes or unmutes the TV sound.
- Source/Input: Selects the input source (HDMI, AV, etc.).
- Navigation Buttons (Up, Down, Left, Right): Navigates through menus and options.
- OK Button: Confirms selections or opens menus.
- Back Button: Returns to the previous screen or menu.
- Exit Button: Exits the current menu or application.
- Dedicated App Buttons (Netflix, YouTube, Freeview F): Provides quick access to these applications (functionality depends on TV model and internet connection).
- Color Buttons (Red, Green, Yellow, Blue): Used for specific functions within menus or applications, as indicated on the TV screen.
3.2 Ergonomics and Range

Figure 2: Side view of the Hitachi RC43141 remote control, highlighting its ergonomic curve for comfortable grip.
The remote control is designed to fit comfortably in your hand. It operates using infrared signals with a maximum effective range of approximately 10 meters (33 feet). Ensure a clear line of sight between the remote control and the TV's infrared sensor for optimal performance.
4. Maintenance
4.1 Cleaning
To clean the remote control, gently wipe its surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as these can damage the remote.
4.2 Battery Replacement
Replace the batteries when the remote control's response becomes sluggish or stops working. Follow the battery installation steps outlined in Section 2.1. Always replace both batteries at the same time with new ones of the same type (AAA).
Important: Remove batteries if the remote control will not be used for an extended period to prevent leakage and potential damage.
5. Troubleshooting
- Remote control is not responding:
- Check if the batteries are correctly inserted with the correct polarity.
- Replace the batteries with new ones.
- Ensure there is a clear line of sight between the remote control and the TV's infrared sensor. Remove any obstructions.
- Verify that the TV is powered on.
- Specific buttons are not working:
- This could indicate low battery power. Try replacing the batteries.
- Ensure the TV model is fully compatible with all features of this remote.
- App buttons (Netflix, YouTube) are not launching apps:
- Ensure your Smart TV is connected to the internet.
- Verify that the apps are installed and updated on your TV.
- Some older TV models may not support direct app launch buttons.
6. Specifications
| Brand: | Hitachi |
| Model Name: | RC43141 (Also known as X3Y3-IR-6697G-191119-3Z3) |
| Part Number: | 30100945 (Also A3B3-IR-6697G-191119-3C3) |
| Connectivity Technology: | Infrared |
| Compatible Devices: | Television (Hitachi Smart LED TVs 2018-2019) |
| Maximum Number of Supported Devices: | 1 |
| Number of Buttons: | 25 |
| Maximum Range: | 10 Meters (approximately 33 feet) |
| Battery Type: | 2 x AAA (Alkaline recommended) |
| Special Feature: | Ergonomic Design |
| Color: | Black |
| Country of Origin: | China |
7. Compatible TV Models
This remote control is compatible with the following Hitachi Smart LED TV models from 2018-2019:
- 24HB21T65U
- 32HB26T61U A
- 43HB26T72U
- 43HK25T74U
- 50HB26T72U A
- 50HK25T74U
- 55HK25T74U
Please verify your TV model number to ensure full compatibility.
8. Warranty and Support
Specific warranty information for this product is not provided in the available data. For details regarding warranty coverage, please refer to the documentation included with your original purchase or contact Hitachi customer support directly.
For technical assistance or further inquiries, please visit the official Hitachi support website or contact their customer service department.