1. Introduction
The LE LED Light Bulbs are energy-efficient, non-dimmable A19 E26 bulbs designed to provide soft warm white illumination. This manual provides essential information for the safe and effective use, installation, and maintenance of your new LED bulbs.
2. Safety Information
Please read and understand all safety instructions before installing or using these bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Risk of Electric Shock: Always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- Non-Dimmable: These bulbs are NOT designed for use with dimmer switches. Using them with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
- Indoor Use Only: These bulbs are intended for indoor use in dry locations. Do not expose to water or excessive moisture.
- Proper Fixture: Ensure the fixture is rated for the bulb's wattage and voltage (120V AC).
- Do Not Disassemble: Do not attempt to disassemble or modify the bulb. There are no user-serviceable parts inside.
- Operating Temperature: Do not use in enclosed fixtures that restrict airflow, as this may shorten the bulb's lifespan.
3. Product Features
Your LE LED Light Bulbs offer several benefits for your lighting needs:
- Long Lifespan: Designed for an impressive 10,000 hours of operation, providing years of reliable lighting.
- Energy Efficient: Consumes only 9 watts of power, replacing traditional 60-watt incandescent bulbs and reducing energy consumption by up to 85%.
- Soft Warm White Light: Emits a comfortable 2700 Kelvin color temperature, creating a cozy and inviting atmosphere.
- High Brightness: Delivers 800 lumens of bright, consistent light.
- Standard Base: Features a standard E26 medium screw base for easy installation in most common light fixtures.
- Flicker-Free & Instant On: Provides immediate, stable illumination without any noticeable flickering.
- Wide Beam Angle: Offers a 180-degree beam angle for broad light distribution.
- High Color Rendering Index (CRI): With a CRI of 80+, colors appear vibrant and true to life.
4. Setup and Installation
Installing your LE LED Light Bulb is a simple process:
- Turn Off Power: Before beginning, ensure the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- Remove Old Bulb: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it has been recently in use.
- Install New Bulb: Gently screw the LE LED bulb into the E26 medium base socket until it is snug. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
5. Operating Instructions
These LE LED bulbs are designed for straightforward operation:
- Simply use your standard wall switch to turn the light fixture on or off.
- As these bulbs are non-dimmable, they will operate at full brightness when power is supplied.
6. Maintenance
Minimal maintenance is required for your LE LED Light Bulbs:
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid or abrasive cleaners.
- Replacement: Due to their long lifespan, frequent replacement is not expected. Replace the bulb when its light output significantly diminishes or it ceases to function.
7. Troubleshooting
If you encounter issues with your LE LED Light Bulb, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up | No power to the fixture; Bulb not screwed in properly; Faulty bulb or fixture. | Check if the light switch is on. Verify power at the circuit breaker. Ensure the bulb is securely screwed into the socket. Test the bulb in another working fixture or try a different bulb in the current fixture. |
| Bulb flickers | Incompatible dimmer switch; Loose connection; Voltage fluctuations. | These bulbs are non-dimmable. Ensure they are not connected to a dimmer switch. Check if the bulb is screwed in tightly. If flickering persists, consult an electrician to check for voltage issues. |
| Light output is too low | Incorrect bulb for the space; Dust accumulation. | Ensure the bulb's brightness (800 lumens) is suitable for your needs. Clean the bulb and fixture regularly to remove dust. |
8. Specifications
Detailed specifications for the LE LED Light Bulbs:
| Specification | Value |
|---|---|
| Brand | Lepro |
| Model Number | 100079-WW-US-5 |
| Light Type | LED |
| Wattage | 9 Watts |
| Incandescent Equivalent | 60 Watts |
| Brightness | 800 Lumens |
| Color Temperature | 2700 Kelvin (Soft Warm White) |
| Bulb Base | E26 (Standard Medium Base) |
| Bulb Shape Size | A19 |
| Lifespan | 10,000 Hours |
| Voltage | 120 Volts (AC) |
| Color Rendering Index (CRI) | 80+ |
| Material | Plastic |
| Indoor/Outdoor Usage | Indoor |
| Special Features | Energy Efficient, Eye-Friendly, Flicker-Free, Instant On, Long Lasting |
| Certification | UL Listed |
| Product Dimensions | 2.36"W x 4.17"H |
9. Warranty and Support
These LE LED Light Bulbs are manufactured to high-quality standards and are designed for a long operational life. For any product inquiries, technical support, or warranty claims, please contact Lepro customer service through their official channels. Please retain your proof of purchase for warranty purposes.
