Armitron Sport Digital Chronograph Watch

Introduction

Thank you for purchasing the Armitron Sport Digital Chronograph Watch. This manual provides essential information for the proper use and care of your watch. Please read it thoroughly to ensure optimal performance and longevity of your timepiece.

Image: Armitron Sport Digital Watch, Model 45/7123NBPST, worn on a wrist. The watch features a neon blue case and strap with a pink bezel.

Setup

1. Initial Power On and Time Setting

Your watch comes with a pre-installed battery. Upon first use, or after a battery replacement, you may need to set the time and date.

1. Press the MODE button repeatedly until the time setting mode is displayed (usually indicated by flashing digits).
2. Use the ADJ (Adjust) button to select the digit you wish to change (hours, minutes, seconds, month, day, year).
3. Use the ST/START (Set/Start) button to increase the selected value.
4. Once all settings are correct, press the MODE button to exit the setting mode.

Image: A close-up view of the Armitron Sport Digital Watch display, showing the time and various function labels like ADJ, MODE, ST/START. This image helps identify the buttons for setting the watch.

2. Changing the Strap

Your watch includes an interchangeable strap, allowing you to customize its appearance. To change the strap:

1. Locate the spring bars connecting the strap to the watch case.
2. Using a small tool (or your fingernail if accessible), depress the spring bar and gently pull the strap away from the watch case.
3. Repeat for the other side of the strap.
4. Align the new strap with the watch case and insert one end of the spring bar into the lug hole.
5. Depress the other end of the spring bar and guide it into the opposite lug hole until it clicks into place. Ensure the strap is securely attached before wearing.

Image: The Armitron Sport Watch packaging, highlighting the interchangeable strap feature. This image illustrates that the watch comes with an option to change its strap.

Operating Instructions

Your Armitron Sport watch offers several functions accessible via the side buttons.

1. Basic Time Display

In the default time mode, the watch displays the current hour, minutes, seconds, day, and date. Press the MODE button to cycle through different functions.

2. Chronograph (Stopwatch)

The chronograph function allows you to measure elapsed time.

1. Press the MODE button until "CHRONO" or a similar indicator appears.
2. Press ST/START to start the chronograph.
3. Press ST/START again to pause/resume.
4. Press ADJ to reset the chronograph to zero.
5. The watch also supports lap time measurement. Refer to the on-screen indicators for specific lap functions.

3. Alarm Function

Set an alarm to sound at a specific time.

1. Press the MODE button until the alarm setting mode is displayed.
2. Use the ADJ button to select hours or minutes.
3. Use the ST/START button to adjust the alarm time.
4. Press MODE to confirm and exit.
5. To activate/deactivate the alarm, look for an alarm icon on the display and use the ADJ or ST/START button in alarm mode to toggle it.

4. Military Time (24-Hour Format)

Your watch supports both 12-hour and 24-hour (military) time formats. This setting is usually adjusted within the time setting mode. While setting the time, press ADJ or ST/START when the hour is flashing to toggle between 12H and 24H display.

5. Backlight

To illuminate the display in low-light conditions, press the LIGHT button (if present, or typically the top-left button). The backlight will remain on for approximately three seconds.

6. Water Resistance

This watch is water resistant up to 100 meters (330 feet). This means it is suitable for swimming and snorkeling, but not for scuba diving. Avoid pressing buttons underwater to prevent water ingress.

Image: A water resistance chart explaining different levels of water resistance for watches. It indicates that 100M (330FT) is suitable for swimming and snorkeling, but not scuba diving.

Maintenance

1. Cleaning Your Watch

To maintain the appearance of your watch, wipe it regularly with a soft, dry cloth. For silicone straps, a damp cloth with mild soap can be used, followed by rinsing and thorough drying.

2. Battery Replacement

When the display becomes dim or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance. The watch uses one product-specific battery.

3. Water Resistance Care

To preserve the water resistance of your watch:

• Do not operate buttons while the watch is submerged in water.
• Avoid exposing the watch to extreme temperature changes (e.g., hot showers followed by cold water).
• Have the water resistance checked periodically, especially after battery replacement.

Troubleshooting

• Display is blank or dim: The battery may be low or depleted. Replace the battery.
• Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, refer to specific model features). Try resetting the watch by pressing all buttons simultaneously for a few seconds, or by removing and reinserting the battery (professional service recommended).
• Time is incorrect: Re-set the time and date following the instructions in the "Setup" section. Check if the 12/24-hour format is set correctly.
• Water inside the watch: Immediately take the watch to a qualified technician for inspection and repair to prevent further damage.

Specifications

Warranty and Support

Manufacturer's Warranty

This Armitron Sport watch is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or service inquiries, please visit the official Armitron website or contact their customer service department. You can also visit the Armitron Brand Store on Amazon for more information.