Phonak 13275450666

Download PDF
Contents

Phonak Power Pack

Instruction Manual for Model 13275450666

Introduction

This manual provides essential information for the safe and effective use of your Phonak Power Pack. The Phonak Power Pack is designed to extend the battery life of compatible Phonak hearing aid charger cases, offering portable charging capabilities. Please read these instructions carefully before using the device and retain them for future reference.

Setup

The Phonak Power Pack is designed for easy attachment to your compatible Phonak charger case. Follow these steps to prepare your device for use:

  1. Identify Connection Points: Locate the connection port on the bottom of your Phonak charger case and the corresponding connector on the top of the Power Pack.
  2. Align and Attach: Carefully align the Power Pack with the bottom of your charger case. Gently push the Power Pack onto the charger case until it clicks securely into place. Ensure a firm connection.
  3. Verify Connection: Once attached, the Power Pack and charger case should form a single, stable unit.
Phonak Charger Case and Power Pack side-by-side
Image: The Phonak Charger Case and the Phonak Power Pack shown separately, illustrating how they connect. The charger case is open, revealing the hearing aid slots, while the Power Pack is shown as a separate base unit.
Close-up of Phonak Power Pack showing charging port and indicator lights
Image: A close-up view of the Phonak Power Pack's side, highlighting the micro-USB charging port and the battery indicator lights. The device has a metallic finish with a green accent.

Operating Instructions

The Power Pack provides portable energy for your hearing aid charger case. Here’s how to use it:

  1. Charging the Power Pack: Connect the Power Pack to a power source using a compatible micro-USB cable. The indicator lights on the Power Pack will illuminate to show the charging status. All lights solid indicate a full charge.
  2. Checking Battery Status: Press the small button next to the indicator lights on the Power Pack to check its current charge level. The number of illuminated lights corresponds to the remaining battery capacity.
  3. Charging Hearing Aids: Once the Power Pack is attached to your charger case and charged, simply place your hearing aids into the charger case. The Power Pack will automatically provide power to the charger case, allowing it to charge your hearing aids without needing a wall outlet.
  4. Detaching the Power Pack: To detach, locate the release mechanism (often a small switch or button) on the Power Pack or charger case. Slide or press it while gently pulling the Power Pack away from the charger case.

Compatibility

The Phonak Power Pack is compatible with specific Phonak charger cases and hearing aid models. Refer to the compatibility guide below to ensure your devices are supported.

Phonak charger compatibility guide table
Image: A detailed table titled 'Phonak charger compatibility guide'. It lists various Phonak charger models (e.g., Charger Ease, Charger Case Go, Power Pack) and their compatibility with different Phonak hearing aid models (e.g., Audéo L-R/RT, Slim L-R, Naída P-PR).

For specific compatibility details, consult the table provided or contact Phonak customer support.

Care and Maintenance

  • Cleaning: Use a soft, dry cloth to clean the Power Pack. Do not use water, cleaning solvents, or abrasive materials.
  • Storage: Store the Power Pack in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Impact: Protect the device from drops and impacts, as this can damage internal components.
  • Battery Care: For optimal battery life, avoid fully discharging the Power Pack frequently. Charge it regularly, even if not in constant use.

Troubleshooting

ProblemPossible CauseSolution
Power Pack not chargingCable not connected properly; faulty cable or power adapter; Power Pack battery fully discharged.Ensure micro-USB cable is securely connected. Try a different cable or power adapter. Allow Power Pack to charge for an extended period if fully discharged.
Hearing aids not charging from Power PackPower Pack not securely attached to charger case; Power Pack battery low; charger case issue.Verify the Power Pack is firmly attached to the charger case. Check Power Pack battery level and recharge if necessary. Ensure hearing aids are correctly placed in the charger case.
Indicator lights not workingDevice malfunction; battery issue.Ensure the Power Pack is charged. If the issue persists, contact customer support.

If you encounter problems not listed here, or if solutions do not resolve the issue, please contact Phonak customer support.

Technical Specifications

  • Model Number: 13275450666
  • Brand: Phonak
  • Package Dimensions: 4 x 3 x 0.3 inches
  • Item Weight: 3.2 ounces
  • Material: Plastic
  • Color: Green (accent)
  • First Available: November 20, 2019

Warranty and Support

For information regarding the warranty period and terms for your Phonak Power Pack, please refer to the warranty card included with your product or visit the official Phonak website. For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Phonak customer support directly. Contact details can typically be found on the Phonak website or in your product packaging.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.