ZACO V85 Robot Vacuum and Mop 2-in-1 User Manual

1. Introduction

The ZACO V85 is an advanced 2-in-1 robot vacuum and mop designed to simplify your home cleaning. It efficiently vacuums and mops hard floors and carpets, featuring intelligent navigation, app control, and voice assistant compatibility for a truly automated cleaning experience. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your ZACO V85 robot.

2. Important Safety Instructions

Please read these safety instructions carefully before using your ZACO V85 robot and keep them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Do not allow the robot to pick up large objects, sharp objects, or liquids.
• Use only the original charging station and power adapter provided by ZACO.
• Do not operate the robot if it is damaged or malfunctioning. Contact customer support.
• Keep the robot away from open flames and heat sources.
• Ensure all cables, curtains, and fragile items are cleared from the cleaning path to prevent entanglement or damage.

3. Package Contents

Verify that all items listed below are included in your package:

• ZACO V85 Robot Vacuum and Mop
• Charging Station
• Power Adapter Cable
• InvisibleWall Sensor (batteries included)
• Remote Control (batteries included)
• Mopping Module & Microfiber Cloth
• 750ml Dustbin (pre-installed in robot)
• Additional Microfiber Cloth
• Additional Fine Particle Filter
• 2 Additional Side Brushes
• Cleaning Tool
• User Manual (DE, FR, IT, EN, ES)

Image: All components included in the ZACO V85 package.

4. Product Overview

Familiarize yourself with the main components of your ZACO V85 robot.

Robot Top View

Image: Top view of the ZACO V85 robot, showing the control panel and sleek design.

Robot Bottom View

Image: Bottom view of the ZACO V85 robot, highlighting the side brushes, wheels, and mopping pad attachment area.

Key Components:

• Main Body: Houses the motor, dustbin, water tank, and control electronics.
• Control Panel: Buttons for starting/pausing, returning to dock, and mode selection.
• Dustbin (750ml): Collects dust and debris during vacuuming.
• Water Tank (300ml): Holds water for mopping function.
• Side Brushes: Sweep debris into the robot's path.
• Driving Wheels: Allow the robot to move across various surfaces.
• Sensors: Anti-collision, anti-drop, and i-Move navigation sensors for intelligent movement.
• Charging Contacts: Connects with the charging station for automatic recharging.

5. Setup Guide

5.1 Initial Charging

1. Place the charging station against a wall in an open area, ensuring there are no obstacles within 1 meter to the sides and 2 meters in front.
2. Connect the power adapter to the charging station and plug it into a wall outlet.
3. Place the ZACO V85 robot onto the charging station, ensuring the charging contacts align. The robot will begin charging automatically. Allow it to fully charge before first use (approximately 4-5 hours).

5.2 App Connection (ZACO HOME)

For full control and scheduling features, download the ZACO HOME app.

1. Download the "ZACO HOME" app from your smartphone's app store (Android or iOS).
2. Register an account and log in.
3. Ensure your Wi-Fi network is 2.4GHz. The ZACO V85 does not support 5GHz networks. If your router broadcasts both, ensure your phone is connected to the 2.4GHz network during setup.
4. Follow the in-app instructions to add your ZACO V85 robot. This typically involves pressing a button on the robot to enter pairing mode.

Image: The ZACO HOME smartphone app interface, showing scheduling options for automated cleaning.

5.3 InvisibleWall Setup

The InvisibleWall sensor creates a virtual barrier to restrict the robot's cleaning area.

• Insert the included batteries into the InvisibleWall sensor.
• Place the InvisibleWall sensor on the floor at the entrance of the area you want to block. Ensure the sensor's infrared beam is facing the direction you want to restrict.
• The robot will detect this invisible barrier and avoid crossing it.

Image: The ZACO V85 robot approaching an InvisibleWall sensor, demonstrating how the virtual barrier prevents it from entering a restricted area.

6. Operating Your ZACO V85

6.1 Cleaning Modes

The ZACO V85 offers four unique cleaning modes:

• Auto Cleaning: The robot automatically cleans the entire floor area.
• Spot Cleaning: The robot focuses on a specific dirty area, cleaning in a spiral pattern.
• Edge Cleaning: The robot cleans along walls and furniture edges.
• Scheduled Cleaning: Set a cleaning schedule via the app for automated daily cleaning.

6.2 Vacuuming Function

The robot is equipped with a 750ml XXL dustbin for efficient dry cleaning.

• Ensure the dustbin is properly installed before vacuuming.
• The robot will automatically adjust suction power based on floor type (hard floor or carpet).

6.3 Mopping Function

For wet cleaning, attach the mopping module with the microfiber cloth.

1. Remove the dustbin and insert the 300ml water tank with the attached microfiber cloth.
2. Fill the water tank with clean water. You can adjust the water flow level (three levels available) via the app or remote control.
3. The robot will automatically mop hard floors. Avoid using the mopping function on carpets.

Image: Visual representation of the ZACO V85's dual vacuuming and mopping capabilities.

6.4 Control Options

• App Control: Use the ZACO HOME app for comprehensive control, including mode selection, scheduling, and monitoring.
• Voice Control: Compatible with Alexa and Google Assistant. Enable the ZACO skill/action in your voice assistant app and link your account. Example commands: "Alexa, tell ZACO to start cleaning."
• Remote Control: Use the included remote for basic functions like starting/stopping, changing modes, and returning to the charging station.
• On-Robot Buttons: Press the buttons on the robot's top panel for quick start/stop and return to dock.

Image: The ZACO V85 robot operating in a room with an Amazon Alexa device, illustrating its voice control compatibility.

6.5 i-Move Navigation

The ZACO V85 utilizes i-Move infrared navigation to efficiently map and clean your home. It detects obstacles and stairs, ensuring thorough coverage while avoiding collisions and falls.

Image: The ZACO V85 robot demonstrating its i-Move navigation pattern while cleaning a living room area.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your ZACO V85 robot.

7.1 Dustbin and Filter Cleaning

• Empty Dustbin: After each cleaning cycle, press the release button to remove the dustbin and empty its contents.
• Clean Filter: Tap the fine particle filter to remove dust. For thorough cleaning, rinse the filter under running water (only if specified as washable in your specific model's detailed instructions) and allow it to air dry completely before reinserting. Replace the filter every 3-6 months depending on usage.

Image: Replacement fine particle filters for the ZACO V85, essential for maintaining suction efficiency.

7.2 Water Tank and Mopping Cloth Cleaning

• Empty Water Tank: After each mopping session, empty any remaining water from the tank.
• Clean Mopping Cloth: Remove the microfiber cloth from the mopping module and wash it by hand or machine. Allow it to air dry completely before reattaching.

7.3 Side Brush Cleaning

• Regularly check the side brushes for tangled hair or debris. Use the included cleaning tool to cut and remove any tangled hair.
• If brushes are worn or damaged, replace them with new ones.

Image: Replacement side brushes for the ZACO V85, ensuring effective debris collection.

7.4 Sensor Cleaning

• Wipe the anti-drop sensors (located on the bottom of the robot) and anti-collision sensors (located on the bumper) with a clean, dry cloth. Dirty sensors can affect navigation.

8. Troubleshooting

If your ZACO V85 encounters an issue, refer to the following common problems and solutions:

9. Technical Specifications

10. Warranty and Support

ZACO products are designed for reliability and performance. For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official ZACO website or contact their customer service directly.

Keep your purchase receipt as proof of purchase for warranty claims.

For additional support, you may refer to the ZACO brand store on Amazon: ZACO Brand Store