1. Important Safety Instructions
Please read all instructions carefully before using the Reebok i-Run 4.0 Treadmill. Retain this manual for future reference. Failure to follow these instructions may result in injury or damage to the product.
- Always place the treadmill on a flat, stable surface. Ensure there is adequate clear space (at least 2 meters) behind the treadmill for safe operation.
- Keep children and pets away from the treadmill during operation.
- Do not operate the treadmill if it has a damaged cord or plug, or if it is not working properly.
- Always wear appropriate athletic footwear when using the treadmill.
- The maximum user weight for this treadmill is 120 kg (264 lbs). Do not exceed this limit.
- Use the safety key at all times. Attach the clip to your clothing before starting your workout. In case of an emergency, pulling the safety key will immediately stop the treadmill.
- Consult a physician before starting any exercise program.
2. Product Overview
The Reebok i-Run 4.0 is a compact and efficient treadmill designed for home use. It features a powerful 3.0 HP motor, a maximum speed of 16 km/h, and 12 pre-set programs to vary your workouts. Its innovative folding mechanism allows for easy storage, making it suitable for any living space.

Key Features:
- Motor: 3.0 HP
- Maximum Speed: 16 km/h
- Programs: 12 pre-set workout programs
- Incline: Manual 4-degree incline
- Display: LCD screen
- Running Surface Width: 46 cm
- Folding Mechanism: Ultra-compact full folding design
- Transport: Integrated transport wheels
3. Setup
The Reebok i-Run 4.0 Treadmill comes 100% pre-assembled, simplifying the setup process. No complex assembly is required.
Unpacking and Unfolding:
- Carefully remove the treadmill from its packaging. It is recommended to have two people for this step due to the weight of the unit.
- Place the treadmill on a clear, level surface.
- Locate the folding mechanism. Gently lift the running deck until it locks into the unfolded position. Ensure the monitor and handlebars are aligned correctly.
- Verify that all locking pins or levers are securely engaged before use.

Power Connection:
- Plug the power cord into a grounded electrical outlet.
- Ensure the power switch (usually located near the front of the treadmill) is in the 'ON' position.
4. Operating Instructions
Familiarize yourself with the control panel before beginning your workout.

Control Panel Overview:
- LCD Display: Shows time, speed, distance, calories, and heart rate (if applicable).
- Start/Stop Buttons: To begin and end your workout.
- Speed +/- Buttons: Adjust the running speed.
- Program Button: Select from 12 pre-set workout programs.
- Safety Key Slot: Where the safety key must be inserted for operation.
Starting a Workout:
- Ensure the treadmill is plugged in and the power switch is ON.
- Attach the safety key clip to your clothing and insert the safety key into its slot on the console.
- Step onto the treadmill belt, placing your feet on the side rails.
- Press the START button. The belt will begin to move at a low speed.
- Gradually increase the speed using the Speed + button to your desired pace.
Adjusting Speed and Incline:
- Speed: Use the Speed +/- buttons on the console to adjust the speed from 1 km/h up to 16 km/h.
- Incline: The i-Run 4.0 features a manual 4-degree incline. To adjust the incline, you must stop the treadmill, dismount, and manually adjust the incline mechanism at the rear of the treadmill. Refer to the diagram in the full manual for specific instructions.
Using Pre-set Programs:
- While the treadmill is stopped or at a low speed, press the Program button to cycle through the 12 available pre-set programs.
- Each program has varying speed and incline profiles. Select the program that suits your fitness level and goals.
- Press START to begin the selected program.

Stopping the Treadmill:
- Press the STOP button to gradually slow down and stop the treadmill belt.
- Alternatively, pull the safety key to immediately stop the treadmill in an emergency.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Reebok i-Run 4.0 Treadmill.
Cleaning:
- After each use, wipe down the console and handlebars with a damp cloth to remove sweat and dust. Avoid using abrasive cleaners.
- Periodically clean the running deck and motor cover to prevent dust buildup.
Lubrication:
The running belt requires periodic lubrication to reduce friction and extend its lifespan. Refer to the full product manual for specific lubrication intervals and recommended lubricant type. Generally, apply silicone lubricant under the belt every few months, depending on usage.
Storage:
The i-Run 4.0 features a convenient folding design for compact storage.
- Ensure the treadmill is turned off and unplugged.
- Carefully lift the running deck until it locks into the vertical, folded position.
- The integrated transport wheels allow you to easily move the folded treadmill for storage.




6. Troubleshooting
This section addresses common issues you might encounter with your treadmill.
Treadmill Not Starting:
- Check Power: Ensure the power cord is securely plugged into a working outlet and the treadmill's power switch is ON.
- Safety Key: Verify that the safety key is correctly inserted into its slot on the console. The treadmill will not operate without it.
- Circuit Breaker: Check if the household circuit breaker has tripped.
Belt Slipping or Hesitating:
- Belt Tension: The running belt may need adjustment. Refer to the full manual for instructions on how to properly tension the belt.
- Lubrication: Insufficient lubrication can cause the belt to drag. Apply lubricant as per maintenance instructions.
Unusual Noises:
- Loose Parts: Check for any loose screws or components and tighten them.
- Belt Alignment: An off-center belt can cause rubbing noises. Adjust the belt alignment according to the full manual.
If you encounter issues not covered here or if troubleshooting steps do not resolve the problem, please contact customer support.
7. Specifications
Detailed technical specifications for the Reebok i-Run 4.0 Treadmill.
| Feature | Specification |
|---|---|
| Model | i-Run 4.0 |
| Motor Power | 3.0 HP |
| Maximum Speed | 16 km/h |
| Incline Levels | Manual 4-degree incline |
| Running Surface Width | 46 cm |
| Programs | 12 pre-set programs |
| Display Type | LCD |
| Maximum User Weight | 120 kg (264 lbs) |
| Unfolded Dimensions (L x W x H) | 156 x 75 x 133 cm |
| Folded Dimensions (L x W x H) | 153 x 75 x 31.5 cm |
| Frame Material | Alloy Steel |
| Power Source | Electric Cable |
| Transport Wheels | Yes |
| Assembly Required | No (100% pre-assembled) |
8. Warranty and Support
Your Reebok i-Run 4.0 Treadmill is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including coverage duration and what is covered.
Customer Support:
For technical assistance, spare parts, or warranty claims, please contact Reebok customer support. You can typically find contact information on the Reebok website or on your product's packaging.
- Online Support: Visit the official Reebok Fitness website for FAQs and support resources.
- Contact Number: Refer to your warranty documentation for regional support phone numbers.
- Email Support: Check the Reebok Fitness website for email contact options.
When contacting support, please have your product model (i-Run 4.0) and serial number (if applicable) ready.