Blauberg Wall Fan Cabrio Base 100 H User Manual

Product Overview

The Blauberg Cabrio Base 100 H is an innovative, low-noise exhaust fan designed for efficient ventilation in bathrooms and WCs. It features an automatic air flap and low energy consumption, making it an ideal solution for maintaining air quality.

Figure 1: Blauberg Cabrio Base 100 H Wall Fan. This image shows the compact, white design of the wall-mounted exhaust fan with its front cover slightly ajar, revealing the internal mechanism and controls. The fan is designed for discreet integration into various room aesthetics.

Key Features:

• Maximum air flow capacity up to 97 m³/h.
• Low power consumption of 9 W due to an energy-efficient motor.
• Housing and impeller made from durable, UV-resistant plastic.
• Aerodynamically profiled semi-radial impeller for high air flow and low noise.
• Reliable ball bearing motor with minimal energy consumption and integrated overheating protection.
• Maintenance-free ball bearings lubricated for 40,000 hours of continuous operation.
• Integrated thermal actuator for smooth opening and closing of the cover.
• Discharge nozzle with specially designed air straighteners to reduce turbulence and noise.
• High protection class IP44, suitable for bathrooms and WCs.
• Removable fan unit for easy cleaning.

Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
• Ensure the power supply is disconnected before any installation, maintenance, or cleaning.
• Do not operate the fan with a damaged power cord or plug.
• Keep hands and foreign objects away from the fan blades during operation.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not immerse the fan in water or other liquids.
• Ensure proper ventilation in the room where the fan is installed to prevent backflow of gases from open-flame appliances.

Setup and Installation

The Blauberg Cabrio Base 100 H fan is designed for installation into a ventilation shaft or connection to a 100 mm diameter ventilation pipe.

Tools Required:

• Drill
• Screwdriver (Phillips and Flathead)
• Measuring tape
• Pencil
• Wire strippers
• Level

Installation Steps:

1. Preparation: Disconnect power to the installation area at the main circuit breaker.
2. Mounting Location: Choose a suitable location on the wall or ceiling, ensuring it aligns with the ventilation shaft or ducting. The fan is designed for indoor use.
3. Marking: Hold the fan in position and mark the drilling points for mounting screws.
4. Drilling: Drill holes at the marked points. Insert wall plugs if necessary.
5. Wiring: Open the terminal cover on the fan. Connect the electrical wiring according to the wiring diagram provided in the packaging (L for Live, N for Neutral). Ensure all connections are secure. The fan is controlled via a light switch (not included).
6. Mounting the Fan: Secure the fan to the wall using screws. Ensure it is level.
7. Connecting Ducting: If connecting to a ventilation pipe, ensure a secure and airtight connection to the 100 mm diameter outlet.
8. Final Check: Replace the terminal cover. Verify all connections and mounting are secure.
9. Power On: Restore power at the main circuit breaker.

Operating Instructions

The Blauberg Cabrio Base 100 H fan is designed for simple operation, typically controlled by an external light switch.

Basic Operation:

• Turning On: Activate the external light switch connected to the fan. The fan will begin operation.
• Automatic Air Flap: Upon activation, the integrated thermal actuator will smoothly open the automatic air flap. This process may take a few moments.
• Turning Off: Deactivate the external light switch. The fan will stop, and the automatic air flap will smoothly close.

Note: The fan's operation is dependent on the external switch. If the fan does not start immediately, allow a short delay for the thermal actuator to respond and the flap to open.

Maintenance

Regular maintenance ensures optimal performance and longevity of your Blauberg fan. Always disconnect power before performing any maintenance.

Cleaning the Fan Unit:

1. Disconnect Power: Turn off the power supply to the fan at the circuit breaker.
2. Remove Cover: Carefully unclip or unscrew the front cover of the fan.
3. Remove Fan Unit: The fan unit is fully removable for cleaning. Gently pull it out from the housing.
4. Clean Impeller and Housing: Use a soft, damp cloth to wipe away dust and debris from the impeller blades and the interior of the fan housing. For stubborn dirt, a mild detergent can be used. Do not use abrasive cleaners or solvents.
5. Dry Thoroughly: Ensure all parts are completely dry before reassembly.
6. Reassemble: Carefully reinsert the fan unit into the housing and secure the front cover.
7. Restore Power: Turn the power supply back on.

Frequency: Cleaning is recommended every 3-6 months, or more frequently in dusty environments.

Ball Bearings:

The ball bearings are maintenance-free and lubricated for 40,000 hours of continuous operation. No additional lubrication is required.

Troubleshooting

If you experience issues with your Blauberg fan, refer to the following troubleshooting guide:

If the problem persists after following these steps, please contact Blauberg customer support.

Specifications

Warranty and Support

For warranty information or technical support, please contact Blauberg customer service. Keep your purchase receipt as proof of purchase.

While specific warranty details are not provided here, Blauberg products typically come with a manufacturer's warranty covering defects in materials and workmanship under normal use.

For further assistance, please visit the official Blauberg website or contact your local distributor.