BAILONGJU ITYD-JS-1214-008

USB Star Projector Night Light User Manual

Model: ITYD-JS-1214-008 | Brand: BAILONGJU

1. Product Overview

The BAILONGJU USB Star Projector Night Light is a portable and adjustable lighting device designed to create a starry atmosphere in various indoor environments, including car interiors, bedrooms, and for party decorations. It features a flexible design for multi-angle adjustment and is powered via a standard USB interface.

USB Star Projector Night Light projecting red stars in a bedroom

Image 1.1: The USB Star Projector Night Light creating a red starry effect in a bedroom setting.

2. Key Features

Easy Installation: Plugs directly into any standard USB interface.
Flexible Design: Lightweight and adjustable, allowing for multi-angle projection.
Versatile Use: Suitable for car interiors, room decor, bedrooms, and various party settings.
Portable: Small size and light weight for easy transport.
Multiple Projection Modes: Features 6 distinct projection patterns, adjustable by rotating the metal head.
Dimmable: Allows for adjustment of light intensity.

3. Setup Guide

Setting up your USB Star Projector Night Light is straightforward. Follow these steps for optimal performance:

Power Source Connection: Insert the USB plug of the projector into any compatible USB interface. This can include a car USB port, a wall charger with a USB output, a computer USB port, or a portable power bank.
Positioning: Utilize the flexible cable to bend and position the projector to your desired angle. This allows for projection onto ceilings, walls, or other surfaces.

Diagram showing USB Star Projector connected to various power sources like car USB, charger, computer, and power bank

Image 3.1: The projector can be powered by various USB sources, including car USB interfaces, wall chargers, computers, and power banks.

4. Operating Instructions

Once connected to a power source, the projector will illuminate. You can adjust the projection effect as follows:

Adjusting Projection Patterns: The projector features a rotating metal head. Gently twist this head to cycle through the 6 available projection modes, changing the pattern of the starry effect.
Adjusting Angle: The flexible body of the projector allows for 360-degree rotation and bending. Adjust the angle to direct the light to different areas of your space.

Close-up of the projector head with arrows indicating 360-degree rotation

Image 4.1: The projector head can be rotated 360 degrees to change the lighting effect.

Images showing the USB Star Projector used in a car, bedroom, and for entertainment

Image 4.2: The projector creates a starry atmosphere suitable for car interiors, bedrooms, and entertainment areas.

Red star projection inside a car interior

Image 4.3: The projector in use within a car, illuminating the roof with a starry effect.

5. Maintenance

To ensure the longevity and optimal performance of your USB Star Projector Night Light, follow these simple maintenance guidelines:

Cleaning: Use a soft, dry cloth to gently wipe the exterior of the projector. Avoid using abrasive cleaners or solvents, as these can damage the finish or internal components.
Storage: When not in use, store the projector in a cool, dry place away from direct sunlight and extreme temperatures.
Cable Care: While the cable is flexible, avoid excessive bending or sharp kinks, which could damage the internal wiring.

6. Troubleshooting

If you encounter any issues with your USB Star Projector Night Light, please refer to the following common problems and their solutions:

Problem	Possible Cause	Solution
No light or very dim light.	Loose USB connection. Insufficient power from USB source. Product defect.	Ensure the USB plug is fully inserted into the port. Try a different USB power source (e.g., a wall adapter instead of a low-power computer port). Test the projector in another USB port or with a different device. If the issue persists, contact customer support.
Projection pattern is not changing.	Metal head not rotated correctly.	Gently rotate the metal head at the top of the projector to cycle through the different patterns.
Light appears faded or disappears after a short time.	Overheating or internal component issue. Inconsistent power supply.	Disconnect the projector and allow it to cool down. Reconnect after a few minutes. Ensure the USB power source provides stable output. Try a different, reliable power source. If the problem persists, it may indicate a product defect.

7. Product Specifications

Specification	Detail
Product Name	USB Star Projector Night Light
Model Number	ITYD-JS-1214-008
Brand	BAILONGJU
Type	Ceiling Light / Decorative Light
Product Material	Metal (Base), Plastic (Shade)
Product Dimensions	0.5"D x 0.5"W x 11"H (approx. 0.51 x 0.51 x 10.98 inches)
Item Weight	1.45 ounces (approx. 41 Grams)
Lamp Type	LED
Light Source Type	LED
Power Source	Corded Electric (USB)
Voltage	5 Volts
Wattage	0.15 W (150 Milliwatts)
Current	0.2 A
Working Temperature	-40°C to +85°C
Projection Mode	6 types (adjustable by rotating metal head)
Special Feature	Dimmable
Control Method	Manual (Rotation)
Indoor/Outdoor Usage	Indoor
Assembly Required	No
Included Components	1x Star Projector Night Light

Product specification diagram showing dimensions, power, and features like USB interface, highlight, for car, for home

Image 7.1: A visual representation of the product's key specifications and features.

8. Warranty and Support

This product is manufactured by BAILONGJU. For any inquiries, technical support, or warranty claims, please contact the seller or refer to your purchase platform for specific return and support policies.

Please retain your proof of purchase for any warranty-related services.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.