Introduction
Welcome to the Adventure Force Ultimate Dino City Garage. This playset offers an immersive experience with multiple levels, interactive features, and dinosaur-themed elements. Standing over 3 feet tall, it accommodates up to 50 die-cast vehicles and includes various mechanical features such as a car elevator, a 360-degree crane, and dual race tracks. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and enjoyable use of your new playset.

Figure 1: Overview of the Ultimate Dino City Garage Playset.
Safety Information
Please read all safety instructions before using the product. Failure to follow these instructions may result in injury or damage to the product.
- Age Recommendation: This product is suitable for children.
- Small Parts: The playset may contain small parts. Keep away from children under 3 years of age to prevent choking hazards.
- Battery Safety:
- Requires alkaline batteries (not included).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Insert batteries with correct polarity (+ and -).
- Remove exhausted batteries promptly.
- Do not short-circuit battery terminals.
- Remove batteries if the product is not used for an extended period.
- Supervision: Adult supervision is recommended during play.
- Indoor Use: This product is designed for indoor play only.
Package Contents
Verify that all components are present before beginning assembly.
- Ultimate Dino City Garage Playset (main structure)
- 5 Die-cast Vehicles
- Crane attachment
- Various track pieces and accessories
Note: Batteries are not included and must be purchased separately.
Setup
1. Unpacking and Initial Assembly
- Carefully remove all components from the packaging.
- Identify the main garage structure and any separate track pieces or accessories.
- Connect any detachable track sections or ramps to the main garage structure as indicated in the visual guides (refer to product images for general layout). Ensure all connections are secure.
- Attach the 360-degree crane to its designated mounting point on the playset.

Figure 2: Attaching the crane to the playset.
2. Battery Installation
The playset requires alkaline batteries for its light and sound features.
- Locate the battery compartment, typically on the base or a central tower of the playset.
- Using a screwdriver (not included), open the battery compartment cover.
- Insert the required number of alkaline batteries, ensuring correct polarity (+ and -) as marked inside the compartment.
- Replace the battery compartment cover and secure it with the screw.
Test the light and sound features by activating the designated levers or driving a car through the main gate.

Figure 3: Main gate with light and sound activation.
Operating Instructions
The Ultimate Dino City Garage offers various interactive features for dynamic play.
1. Car Elevator
Place a die-cast vehicle onto the car elevator platform. Manually operate the elevator mechanism (usually a crank or lever) to raise or lower vehicles between the 5 parking decks.

Figure 4: Car on the elevator platform.
2. 360-Degree Crane
The crane can be manually rotated 360 degrees. Use the attached hook or lifting tray to transport vehicles or other accessories around the playset.

Figure 5: Crane in operation, lifting a vehicle.
3. Dual Track Race Launcher
Position two die-cast vehicles at the starting gates of the dual race tracks. Activate the launcher mechanism (e.g., press a button or pull a lever) to send the cars racing down the tracks. The tracks feature a menacing T-Rex jaw and a fierce raptor at the finish line.

Figure 6: Dual race track launcher.
4. Light and Sound Features
The playset includes interactive light and sound effects. These are typically activated by pressing specific levers or by driving vehicles through designated areas, such as the main entrance gate.
5. Dino City Features
Explore various dinosaur-themed elements throughout the garage, including a spiral track leading through a T-Rex jaw and a raptor guarding the race track finish. The playset also features a massive wrecking ball.
Maintenance
Cleaning
To clean the playset, wipe surfaces with a soft, damp cloth. Do not immerse the playset in water or use harsh chemicals, as this may damage the electronic components or plastic materials.
Storage
When not in use, store the playset in a cool, dry place away from direct sunlight. If storing for an extended period, remove batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights and sounds not working. |
|
|
| Vehicles get stuck on tracks or elevator. |
|
|
| Crane not moving smoothly. |
|
|
Specifications
| Product Name | Adventure Force Ultimate Dino City Garage |
| Brand | Unknown |
| Model Number | fff38475-1805-4f5e-8f7b-e62554561391 |
| UPC/GTIN | 368817440588 |
| Assembled Dimensions | 6.00 x 27.12 x 19.75 inches (approx. 0.8 meters height) |
| Assembled Weight | 4.41 lbs (2 kg) |
| Material | Plastic, Metal |
| Power Source | Battery (Alkaline required) |
| Control Type | Manual / Hand control |
| Special Features | Car elevator, 360-degree crane, Dual track race launcher, Dinosaur features, Light and sound effects |
| Included Components | Playset, 5 Die-cast vehicles |
| Age Range | Children |
Warranty & Support
For information regarding warranty, returns, or customer support, please refer to the retailer's policy or contact the manufacturer directly. As the brand is listed as "Unknown", please check your purchase receipt or packaging for specific contact details.
