1. Product Overview
The Brita XL Water Filter Dispenser (Model TU_31884) is designed to provide filtered water with a large 25-cup (1.56 gallon) capacity, ideal for larger households. Its space-efficient design allows it to fit conveniently on most refrigerator shelves. The dispenser utilizes a Stream filter that reduces chlorine (taste and odor) and other impurities, providing cleaner, great-tasting water.
- Large Capacity: Holds 25 cups of water, equivalent to eight 24-ounce reusable water bottles.
- Space-Efficient Design: Slim profile fits easily on refrigerator shelves.
- Advanced Filtration: Stream filter reduces chlorine (taste & odor) and other contaminants.
- SmartLight Filter Indicator: Electronic indicator signals when to replace the filter.
- BPA-Free: Constructed from BPA-free materials for your safety.

Image 1.1: Brita XL Water Filter Dispenser with included Stream filter.
2. Product Components
Familiarize yourself with the main components of your Brita XL Water Filter Dispenser:
- Dispenser Reservoir: The main body that holds filtered water.
- Lid: Features an easy-fill slide lid for convenient refilling.
- Stream Filter: The filtration cartridge responsible for purifying water.
- Precision-Pour Spigot: Located at the base for easy dispensing.
- SmartLight Filter Indicator: An LED sensor on the lid to monitor filter life.

Image 2.1: Key components of the Brita XL Water Filter Dispenser.
3. Setup Instructions
- Prepare the Filter: Before first use, immerse the new Brita Stream filter in cold water for 10 minutes. This helps remove any air bubbles from the filter media.
- Install the Filter: Insert the prepared filter into the designated slot within the dispenser. Ensure it is securely seated.
- Initial Flushing: Fill the dispenser with cold tap water. Dispense and discard the first 1-2 full reservoirs of filtered water. This flushes out any carbon dust and primes the filter for optimal performance.
- Ready for Use: Your Brita XL Water Filter Dispenser is now ready to provide filtered water.
4. Operating Instructions
- Filling the Dispenser: Slide open the easy-fill lid on top of the dispenser. Pour cold tap water into the reservoir. The dispenser filters water as you pour.
- Dispensing Water: Position your glass or container under the precision-pour spigot. Push the lever on the spigot to dispense filtered water. Release the lever to stop the flow.
- Monitoring Filter Life: The SmartLight Filter Indicator on the lid will glow green when the filter is good. When the indicator flashes red, it is time to replace your water filter.
5. Maintenance
5.1 Filter Replacement
For optimal performance and the freshest tasting water, replace your Brita Stream filter every 40 gallons or approximately every 2 months for the average household. Refer to the SmartLight Filter Indicator for precise timing.
- Remove the lid and old filter from the dispenser.
- Prepare the new filter as described in Section 3.1.
- Insert the new filter into the dispenser, ensuring a snug fit.
- Perform initial flushing as described in Section 3.2.
- Reset the SmartLight Filter Indicator by pressing and holding the reset button (if applicable, refer to specific filter instructions).

Image 5.1: Illustration of the Stream filter's function.
5.2 Cleaning
To clean your dispenser, hand wash all parts with mild detergent and rinse thoroughly. Do not wash in dishwasher. Do not use abrasive cleaners.
6. Troubleshooting
If you experience issues with your Brita XL Water Filter Dispenser, consider the following:
- Slow Filtration: Ensure the filter is properly seated and has been pre-soaked as per setup instructions. A clogged filter may also cause slow filtration, indicating it's time for replacement.
- Water Leaks: Check that the filter is correctly installed and the spigot is tightly secured. Ensure the dispenser is placed on a flat, stable surface.
- Unusual Taste/Odor: This typically indicates that the filter needs to be replaced. Ensure you are using genuine Brita Stream filters.
7. Specifications
| Brand | BRITA |
| Model Name | UltraSlim |
| Item Model Number | TU_31884 |
| Product Dimensions | 17.19"L x 5.5"W x 10.5"H |
| Item Weight | 2.93 pounds (1.33 Kilograms) |
| Capacity | 25 Cups |
| Material | Plastic (BPA-Free) |
| Special Feature | Chlorine Reduction |
| Purification Method | Carbon Block |

Image 7.1: Brita XL Water Filter Dispenser with key dimensions.
8. Important Safety Information
- Do not wash in dishwasher.
- Do not use abrasive cleaners.
- Use only genuine Brita filters for optimal performance and safety.
- Keep out of direct sunlight to maintain water temperature and prevent algae growth.





