Product Overview

Image: PanOxyl Acne Foaming Wash, showing both the product box and the tube.
The PanOxyl Maximum Strength Acne Foaming Wash is formulated with 10% Benzoyl Peroxide, designed for the effective treatment and prevention of acne on both the face and body. This maximum strength formula works by penetrating pores to kill acne-causing bacteria, clearing existing blemishes, and preventing new breakouts from forming.
It gently removes dirt and excess oil, helping to cleanse and unclog pores. This product is available without a prescription and is an excellent choice for managing acne.
Key Features:
- Maximum Strength Formula: Contains 10% Benzoyl Peroxide, the highest over-the-counter concentration available.
- Antimicrobial Action: Kills acne-causing bacteria on contact.
- Clears and Prevents: Effectively clears existing acne blemishes and helps prevent new ones from forming.
- Face and Body Treatment: Suitable for use on the face, chest, and back.
- Pore Cleansing: Lifts dirt and excess oil to cleanse and unclog pores.
Important Safety Information

Image: Back of the PanOxyl Acne Foaming Wash box, displaying the Drug Facts panel.
Warnings:
- For external use only.
- Do not use if you:
- Have very sensitive skin.
- Are sensitive to benzoyl peroxide.
- When using this product:
- Skin irritation and dryness are more likely to occur if you use another topical acne medication at the same time. If irritation occurs, only use one topical acne medication at a time.
- Avoid unnecessary sun exposure and use a sunscreen.
- Avoid contact with the eyes, lips, and mouth.
- Avoid contact with hair and dyed fabrics, which may be bleached by this product.
- Skin irritation may occur, characterized by redness, burning, itching, peeling, or possibly swelling. Irritation may be reduced by using the product less frequently or in a lower concentration.
- Stop use and ask a doctor if:
- Irritation becomes severe.
- If pregnant or breast-feeding, ask a health professional before use.
- Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away.
Usage Instructions
Follow these directions carefully for optimal results and to minimize potential irritation:
Step 1: Wet Area to be Cleansed

Ensure the skin area to be treated is thoroughly wet.
Step 2: Apply and Massage

Apply the acne wash and gently massage it into the skin for 1-2 minutes.
Step 3: Rinse Thoroughly and Pat Dry

Rinse the treated area thoroughly with water and gently pat dry.
Step 4: Application Frequency

Apply once daily. If excessive drying of the skin occurs, start with one application daily, then gradually increase to 2 or 3 times daily if needed or as directed by your Dermatologist.
If bothersome dryness or peeling occurs, reduce application to once a day or every other day. If going outside, apply sunscreen after using this product. If irritation or sensitivity develops, stop use of both products and ask a doctor.
Ingredients
Active Ingredient:
- Benzoyl Peroxide (10%)
Inactive Ingredients:
- Carbomer Homopolymer Type C
- Carbomer Interpolymer Type A
- Decyl Glucoside
- Dimethicone
- Dioctyl Sodium Sulfosuccinate
- Glycerin
- Palmitic Acid
- Polyacrylate Crosspolymer-6
- Polyoxyl 40 Stearate
- Propanediol
- Purified Water
- Silica
- Sodium Chloride
- Sodium Citrate
- Sodium Hydroxide
- Sodium Laurylglucosides Hydroxypropylsulfonate
- Sorbitan Stearate
- Stearic Acid
- t-Butyl Alcohol
- Xanthan Gum
Storage
Store at controlled room temperature: 20° - 25°C (68° - 77°F).
Keep out of reach of children.
Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 2.5 x 2.25 x 7 inches |
| Item Weight | 5.44 ounces (0.34 Pounds) |
| Item Model Number | F19003 |
| UPC | 303160228551 |
| GTIN | 303160228551 |
| Scent | Unscented |
| Age Range (Description) | Adult |
Troubleshooting
No specific troubleshooting steps are typically required for this product beyond adjusting usage frequency as described in the "Usage Instructions" section if irritation or dryness occurs. If irritation becomes severe, discontinue use and consult a doctor.
Manufacturer Information and Support
Manufacturer: Crown Laboratories, Inc.
For questions or comments regarding your PanOxyl Acne Foaming Wash, please contact:
Customer Support: 1-833-279-6522
Please note that specific warranty information is not typically provided for this type of consumable product. Refer to the "Important Safety Information" section for guidance on when to consult a health professional.