Product Overview
The NutriChef Cast Iron Wok with Wooden Lid is a versatile cooking vessel designed for various culinary techniques, including stir-frying, steaming, pan-frying, deep-frying, poaching, boiling, braising, searing, and stewing. Crafted from durable cast iron, it offers excellent heat distribution and retention for even cooking results. This wok comes pre-seasoned for immediate use and features a non-stick coated surface for easy food release.

Image: The NutriChef Cast Iron Wok with its accompanying wooden lid, showcasing its robust design and natural wood finish.

Image: An overview of the NutriChef Wok's key features, including its 5.8-quart capacity, heavy-duty cast iron construction, pre-seasoned non-stick coating, integrated carry handles, and easy-to-clean surface.
What's In The Box
- Cast Iron Wok (5.8 Quart Capacity)
- Wooden Lid Cover
- Silicone Oven Grab Mitt

Image: A visual representation of the NutriChef Cast Iron Wok, its wooden lid, and the included silicone grab mitt, laid out to show all components.
Setup and First Use
Initial Cleaning
Although your NutriChef Cast Iron Wok comes pre-seasoned, it is recommended to wash it with warm water and a mild soap before its first use. Rinse thoroughly and dry immediately with a lint-free cloth or paper towel to prevent rust. Do not air dry.
Seasoning (Optional, but Recommended for Longevity)
While pre-seasoned, additional seasoning can enhance the non-stick properties and protect the wok. To season:
- Preheat your oven to 350°F (175°C).
- Apply a very thin, even layer of high smoke point cooking oil (like vegetable oil, flaxseed oil, or grapeseed oil) to all surfaces of the wok, including the exterior and handles. Wipe off any excess oil to prevent stickiness.
- Place the wok upside down on the middle rack of the oven. Place aluminum foil or a baking sheet on the rack below to catch any drips.
- Bake for one hour.
- Turn off the oven and let the wok cool completely inside the oven.
- Repeat this process 3-4 times for optimal seasoning.
Operating Instructions
Cooktop Compatibility
The NutriChef Cast Iron Wok is compatible with a wide range of heat sources, including gas, electric, ceramic, and induction cooktops. It is also oven-safe up to 480°F (248°C).

Image: An infographic illustrating the compatibility of the NutriChef Wok with gas, electric, glass, induction, oven, and camp heat sources.
Cooking with Your Wok
Cast iron heats evenly and retains heat exceptionally well. For best results:
- Preheat the wok gradually over medium heat before adding oil or food. This ensures even cooking and prevents sticking.
- Use a small amount of cooking oil. The pre-seasoned surface reduces the need for excessive oil.
- The integrated side carry handles can become hot during cooking. Always use the included silicone oven grab mitts or other heat-protective gloves when handling the wok.
- The wooden lid helps to retain heat and moisture, ideal for steaming or simmering dishes.

Image: A close-up view of the NutriChef Wok on a stovetop, filled with colorful stir-fried vegetables and chicken, demonstrating its use.
Maintenance and Care
Cleaning
Proper cleaning is crucial for maintaining your cast iron wok's seasoning and preventing rust.
- Hand Wash Only: This wok is NOT dishwasher safe. Dishwashers can strip the seasoning and lead to rust.
- Wash the wok with warm water immediately after use, while it is still warm (but not hot).
- Use a stiff brush or scraper to remove any stuck-on food. Avoid harsh soaps or abrasive scrubbers, as they can damage the seasoning.
- For stubborn food, you can simmer a small amount of water in the wok for a few minutes to loosen residue.
- Rinse thoroughly and dry the wok completely with a clean cloth or paper towel.
- Immediately after drying, apply a very thin layer of cooking oil to the entire surface of the wok (inside and out) to protect the seasoning.
Storage
Store your wok in a dry place. If stacking with other cookware, place a paper towel between the wok and other items to prevent moisture buildup and scratches.
Re-seasoning
If your wok loses its non-stick properties, develops rust, or food starts sticking, it may need to be re-seasoned. Follow the seasoning steps outlined in the "Setup and First Use" section.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Food sticking | Insufficient seasoning; not preheated properly; too little oil. | Re-season the wok (see "Seasoning" section). Ensure wok is preheated before adding food. Use a thin layer of oil. |
| Rust spots | Wok not dried completely after washing; seasoning stripped. | Scrub rust with steel wool or stiff brush, rinse, dry immediately, and re-season. Always dry completely after washing. |
| Wok feels sticky/gummy | Too much oil applied during seasoning or after cleaning. | Heat the wok on the stovetop until smoking, then wipe off excess oil. For severe stickiness, scrub off old seasoning and re-season from scratch. |
Specifications
- Brand: NutriChef
- Model: NCCIWOK60
- Material: Cast Iron Metal
- Capacity: 5.8 Quarts
- Color: Black
- Maximum Temperature: 480° Fahrenheit (248° Celsius)
- Product Dimensions (L x W x H): 17.09'' x 11.46'' x 1.81'' inches
- Item Weight: Approximately 12.85 lbs
- Special Features: Pre-Seasoned, Non-Stick Coating, Integrated Side Carry Handles, Includes Wooden Lid, Induction Compatible, Oven Safe.
- Care Instructions: Hand Wash Only, Not Dishwasher Safe.

Image: A top-down view of the NutriChef Wok with measurements indicating its 17.09-inch length, 11.46-inch width, 5.8-quart capacity, and 12.85 lbs weight.
Warranty and Support
For warranty information or technical support, please visit the official NutriChef website or contact their customer service department. Keep your purchase receipt as proof of purchase.
Visit the NutriChef Store for more products and information.