Byron DBY-23510 Wireless Push Button User Manual

1. Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Byron DBY-23510 Wireless Push Button. This device is designed to extend your existing Byron DBY doorbell system, allowing for an additional entry point. It features an integrated LED indicator that illuminates upon activation and offers a wireless transmission range of up to 100 meters. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Product Overview

The Byron DBY-23510 is a sleek, white, wireless push button designed for outdoor use. It features a prominent central button with an illuminated LED ring, indicating activation. The unit is battery-powered and communicates wirelessly with compatible Byron DBY doorbell chimes.

Figure 2.1: Front view of the Byron DBY-23510 Wireless Push Button with its LED indicator illuminated.

Package Contents:

• 1x Byron DBY-23510 Wireless Push Button
• 1x Lithium Metal Battery (pre-installed or separate)
• Mounting hardware (screws, wall plugs, or adhesive pad - not explicitly stated but common)

3. Setup and Installation

3.1 Battery Installation/Check

The Byron DBY-23510 push button requires one Lithium Metal battery (3V). The battery is typically pre-installed.

1. Carefully open the back cover of the push button.
2. Verify that the Lithium Metal battery is correctly inserted with the correct polarity (+/-).
3. If replacing, insert a new 3V Lithium Metal battery.
4. Close the back cover securely.

Figure 3.1: Side view of the push button, showing its slim profile, which may indicate where to open for battery access.

3.2 Pairing with a Byron DBY Doorbell Chime

To function, the push button must be paired with a compatible Byron DBY series doorbell chime (sold separately). Refer to your Byron DBY doorbell chime's manual for specific pairing instructions. Generally, the process involves:

1. Put your Byron DBY doorbell chime into pairing mode (usually by pressing a pairing button on the chime).
2. Within a few seconds, press the button on the DBY-23510 Wireless Push Button.
3. The chime should indicate successful pairing (e.g., by ringing or flashing an LED).
4. Test the connection by pressing the push button again.

3.3 Mounting the Push Button

Choose a suitable location for the push button, typically near your entrance. Ensure the surface is clean and dry.

• Adhesive Mounting: If using an adhesive pad (not included), attach it to the back of the push button and firmly press the unit onto the desired surface for at least 30 seconds.
• Screw Mounting:
  1. Mark the desired screw holes on the mounting surface using the push button's back plate as a template.
  2. Drill pilot holes if necessary.
  3. Secure the back plate to the surface using the provided screws.
  4. Attach the push button unit to the secured back plate.

Important: Ensure the mounting location is within the 100-meter wireless range of your doorbell chime and free from major metallic obstructions that could interfere with the signal.

4. Operating Instructions

Once installed and paired, operating the Byron DBY-23510 Wireless Push Button is straightforward.

1. To activate the doorbell chime, firmly press the central button on the push button unit.
2. The LED ring around the button will illuminate briefly, indicating that the signal has been sent.
3. The paired Byron DBY doorbell chime will then sound its selected melody.

Figure 4.1: Front view of the push button in standby mode, with the LED indicator off.

5. Maintenance

5.1 Battery Replacement

When the LED indicator no longer illuminates or the doorbell chime fails to activate when the button is pressed, the battery may need replacement.

1. Carefully open the back cover of the push button.
2. Remove the old 3V Lithium Metal battery.
3. Insert a new 3V Lithium Metal battery, ensuring correct polarity.
4. Close the back cover securely.
5. Test the push button to ensure it functions correctly.

Note: Dispose of old batteries responsibly according to local regulations.

5.2 Cleaning

To clean the push button, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the unit. Ensure no moisture enters the internal components.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For detailed warranty information, please refer to the documentation provided with your original purchase or visit the official Byron website.

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact Byron customer support through their official channels.