Ibergrif M18703

Download PDF
Contents

Ibergrif M18703 Cold Water Kitchen Faucet Instruction Manual

Model: M18703

Introduction

Thank you for choosing the Ibergrif M18703 Cold Water Kitchen Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new faucet. Please read these instructions carefully before installation and retain them for future reference.

The Ibergrif M18703 is a single cold water faucet designed for kitchen sinks, utility rooms, or outdoor use. It features a 360° swivel spout and is constructed from durable V2A stainless steel with a brushed matte finish.

Product Components

Before beginning installation, ensure all components are present and undamaged. The package typically includes:

  • 1 x Cold Water Kitchen Faucet
  • 1 x Flexible Hose (G3/8 inch, 50cm)
  • Mounting Nut
  • Sealing Gaskets
  • Instruction Manual
Ibergrif M18703 faucet components laid out

Image: All components included with the Ibergrif M18703 faucet, including the faucet body, flexible hose, mounting hardware, and manual.

Setup and Installation

This faucet is designed for easy installation. Follow these steps carefully:

  1. Preparation: Ensure the mounting surface (sink or countertop) has a pre-drilled hole with a diameter between 25mm and 28mm. The maximum thickness of the mounting surface should not exceed 40mm. Turn off the main water supply before starting.
  2. Insert Faucet: Place the faucet body into the mounting hole. Ensure the base gasket is correctly positioned between the faucet and the mounting surface.
  3. Secure Faucet: From underneath the sink, slide the rubber washer and metal washer onto the threaded shank of the faucet. Hand-tighten the mounting nut, then use a suitable wrench to firmly secure the faucet to the sink. Do not overtighten.
  4. Connect Water Supply: Connect the provided flexible hose to the threaded inlet on the bottom of the faucet. Connect the other end of the flexible hose to your cold water supply line. Ensure all connections are tight to prevent leaks.
  5. Test: Slowly turn on the main water supply and check for any leaks around the faucet base and connections. Operate the faucet handle to ensure proper water flow.
Four-step installation diagram for Ibergrif M18703 faucet

Image: A visual guide showing the four main steps for installing the Ibergrif M18703 faucet, including hole measurement, faucet placement, securing, and hose connection.

Close-up of the mounting nut and threaded shank of the Ibergrif M18703 faucet

Image: Detail of the faucet's threaded shank and mounting nut, illustrating how it secures to the sink or countertop.

Operating Instructions

The Ibergrif M18703 faucet is designed for simple and intuitive operation:

  • Water Flow Control: The faucet features a single lever handle. Lift the handle to turn on the cold water flow. Push the handle down to turn off the water flow.
  • Flow Adjustment: The water flow rate can be adjusted by varying how much the handle is lifted.
  • Spout Rotation: The spout can swivel 360 degrees, providing flexibility for various tasks such as filling large pots or cleaning different areas of the sink.
Ibergrif M18703 faucet with water flowing into a sink

Image: The Ibergrif M18703 faucet in operation, demonstrating water flow into a kitchen sink.

Diagram showing 360 degree swivel capability of the faucet spout

Image: A diagram illustrating the 360-degree rotation feature of the faucet spout, highlighting its versatility.

Maintenance

Proper maintenance will ensure the longevity and optimal performance of your Ibergrif M18703 faucet:

  • Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the brushed stainless steel finish.
  • Aerator Maintenance: The faucet is equipped with a water-saving aerator. If water flow becomes weak or irregular, unscrew the aerator from the spout and clean any accumulated debris or mineral deposits. Rinse thoroughly and reattach.
  • Cartridge Care: The ceramic cartridge is designed for durability (tested for 500,000 cycles). If you experience persistent dripping or difficulty controlling water flow, the cartridge may need inspection or replacement. Contact customer support for assistance.
Close-up of the 90 degree turn brass ceramic cartridge

Image: A detailed view of the 90-degree turn brass ceramic cartridge, highlighting its robust construction.

Close-up of the water-saving aerator on the faucet spout

Image: A close-up of the faucet's water-saving aerator, showing its design for efficient water flow.

Troubleshooting

If you encounter issues with your Ibergrif M18703 faucet, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Water leaks from faucet baseLoose mounting nut or damaged gaskets.Tighten the mounting nut. Check and replace gaskets if damaged.
Water drips from spoutWorn or faulty ceramic cartridge.Replace the ceramic cartridge.
Low water flowClogged aerator or partially closed water supply valve.Clean the aerator. Ensure the water supply valve is fully open.
Difficulty moving handleMineral buildup or worn internal components.Clean around the handle base. If issue persists, the cartridge may need replacement.

If these solutions do not resolve the issue, please contact Ibergrif customer support.

Specifications

  • Brand: Ibergrif
  • Model Name: M18703
  • Recommended Use: Kitchen, Utility, Outdoor
  • Mounting Type: Surface Mount (Single Hole)
  • Material: Stainless Steel (V2A), Plastic
  • Color: Grey (Brushed Finish)
  • Number of Handles: 1 (Lever Type)
  • Number of Holes Required: 1
  • Special Feature: 360° Swivel Spout
  • Valve Type: Compression Valve (Ceramic Cartridge)
  • Spout Height: 11.8 Centimeters
  • Spout Reach: 7.5 Inches
  • Handle Position: Central
  • Country of Origin: Spain
  • UPC: 600358596127
Ibergrif M18703 faucet with dimensions labeled

Image: Technical drawing of the Ibergrif M18703 faucet with key dimensions, including spout height and reach.

Warranty and Support

The Ibergrif M18703 faucet comes with an official manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Ibergrif website.

For technical assistance, troubleshooting, or warranty claims, please contact Ibergrif customer support directly. Our team is available to provide concrete responses and support for your product.

You can find contact information on the official Ibergrif website or through your retailer.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.