1. Introduction
Thank you for choosing the Ibergrif M22129-2 Sink Mixer Tap. This manual provides essential information for the safe installation, proper operation, and effective maintenance of your new kitchen faucet. Please read these instructions thoroughly before installation and retain them for future reference.
2. Safety Information
- Always turn off the main water supply before beginning any installation or maintenance work.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the faucet's finish, as this may cause damage.
- Protect the product from freezing temperatures.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x Single Lever Sink Mixer Tap with Swivel Nozzle and 2 Functions
- 1 x Installation Kit
- 3 x 40cm G3/8" Hose Pipes
Image: Contents of the Ibergrif M22129-2 package, including the tap, hoses, and mounting hardware.
4. Setup and Installation
This section outlines the steps for installing your Ibergrif M22129-2 Sink Mixer Tap. Ensure you have the necessary tools before starting.
4.1. Pre-Installation
- Turn off the main water supply to your kitchen.
- Remove your old faucet, if applicable. Clean the sink area thoroughly.
- Ensure the mounting hole on your sink or countertop is compatible with a single-hole installation.
4.2. Faucet Installation
- Insert the faucet body into the mounting hole on the sink or countertop.
- From underneath the sink, place the rubber gasket and metal washer over the threaded shank of the faucet.
- Thread the mounting nut onto the shank and tighten it securely using the provided tool or an adjustable wrench. Do not overtighten.
- Connect the hot and cold water supply lines (G3/8" hose pipes) to the corresponding inlets on the faucet body. The hot water line is typically on the left, and the cold water line on the right.
- Connect the other ends of the supply lines to your hot and cold water shut-off valves. Tighten all connections firmly, but avoid overtightening.
- Ensure the flexible spout is correctly seated and secured to the faucet body.
4.3. Post-Installation Check
- Slowly turn on the main water supply.
- Check all connections for leaks. If leaks are present, gently tighten the connections until they stop.
- Run water through the faucet for a few minutes to flush out any debris from the new installation.
5. Operating Instructions
Your Ibergrif M22129-2 Sink Mixer Tap is designed for ease of use and versatility.
5.1. Water Flow and Temperature Control
The single lever handle controls both water flow and temperature:
- To turn on/off: Lift the handle upwards to start the water flow and push it downwards to stop.
- To adjust temperature: Move the handle to the left for hot water and to the right for cold water. The Kelogic system ensures only cold water is used when the handle is in the central position, saving energy by only activating the water heater when hot water is specifically requested.
Image: Illustration of the cold start feature and Kelogic system, showing energy and water savings.
5.2. Swivel Spout Functionality
The faucet features a 360-degree swivel spout, allowing you to direct water flow to any part of your sink for maximum convenience during kitchen tasks.
Image: Demonstrates the 360-degree swivel capability of the faucet spout.
5.3. 2-Function Aerator (Hand Shower)
The flexible spout includes a 2-function aerator, allowing you to switch between two distinct water flow patterns:
- Spout Flow: A steady, aerated stream suitable for filling pots and general washing.
- Flushing Flow: A powerful spray ideal for rinsing dishes and cleaning the sink.
To switch between functions, rotate the aerator head or press the button on the hand shower, depending on the specific design of your model.
Image: Illustrates the two water flow functions: spout flow and flushing flow.
Image: Close-up view of the aerated spout flow.
Image: Close-up view of the powerful flushing spray flow.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your faucet.
6.1. Cleaning the Faucet
- Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive liquid cleaner.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or bleach, as these can damage the finish.
6.2. Cleaning the Aerator
Mineral deposits can accumulate in the aerator, reducing water flow. To clean:
- Unscrew the aerator from the end of the spout.
- Separate the components of the aerator.
- Rinse the mesh screens and other parts under running water. For stubborn deposits, soak them in a solution of equal parts white vinegar and water for 15-30 minutes.
- Reassemble the aerator and screw it back onto the spout.
7. Troubleshooting
This section addresses common issues you might encounter with your faucet.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged aerator; partially closed shut-off valve; kinked supply line. | Clean the aerator (see Section 6.2); ensure shut-off valves are fully open; check supply lines for kinks. |
| Leaking at faucet base | Loose mounting nut; damaged O-rings/gaskets. | Tighten the mounting nut from underneath the sink; inspect and replace O-rings/gaskets if damaged. |
| Leaking from spout | Worn ceramic cartridge. | Replace the ceramic cartridge. (Consult a professional if unsure). |
| Water temperature not adjusting | Issue with hot/cold water supply; faulty cartridge. | Check hot/cold water supply lines; replace the ceramic cartridge. |
8. Specifications
Key technical details for the Ibergrif M22129-2 Sink Mixer Tap:
- Brand: Ibergrif
- Model Name: M22129-2
- Mounting Type: Deck Mount, Single Hole
- Finish Type: Polished
- Material: Brass
- Colour: Black
- Number Of Handles: 1
- Additional Features: Lead Free, Water Saving (Kelogic System)
- Handle Type: Lever
- Spout Design: Swivel
- Item Weight: 2.2 Kilograms
- Included Components: Installation Kit, 3 x 40cm G3/8" Hose Pipe
- UPC: 603922537281
Image: Dimensional drawing of the Ibergrif M22129-2 Sink Mixer Tap, showing height and spout reach.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Ibergrif customer service directly. Keep your proof of purchase for warranty claims.
