1. Introduction
Thank you for choosing the Ibergrif M12003 Wall-Mounted Monomando Shower Mixer Faucet Set. This manual provides essential information for the safe installation, operation, and maintenance of your new shower system. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- Ensure all water supply lines are turned off before beginning installation.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the faucet's surface, as this may damage the finish.
- Check for leaks after installation and periodically thereafter.
- Ensure proper water pressure is maintained according to local regulations.
3. Package Contents
Verify that all components are present before starting installation:
- 1 x Shower Mixer Faucet
- 1 x Installation Kit (includes wall mounts, screws, and washers)
- 1 x Fixed Shower Holder
- 1 x 1.5m Stainless Steel Shower Hose
- 1 x Handheld Shower Head
- 1 x User Manual (this document)

Figure 3.1: All components included in the Ibergrif M12003 shower set, neatly arranged on a white surface. This includes the main mixer faucet, a handheld shower head, a flexible hose, a wall-mounted holder, and various installation accessories like washers and screws.
4. Product Overview
The Ibergrif M12003 is a wall-mounted monomando (single-lever) shower mixer faucet designed for ease of use and durability. It features a sleek stainless steel finish and provides precise control over water temperature and flow.

Figure 4.1: The Ibergrif M12003 shower mixer faucet and the accompanying handheld shower head, both in a brushed stainless steel finish. The mixer features a single lever for controlling water flow and temperature, while the shower head has multiple nozzles for water dispersion.
5. Setup and Installation
Follow these steps for proper installation of your shower mixer faucet:
- Prepare the Installation Area: Ensure the wall connections for hot and cold water are correctly spaced and accessible. Turn off the main water supply.
- Install Wall Mounts: Secure the eccentric connectors (S-unions) into the wall water outlets. Adjust them to ensure the correct distance (typically 150mm center-to-center) and level for the faucet body. Use thread seal tape for a watertight connection.
- Attach Decorative Covers: Place the decorative escutcheons over the eccentric connectors.
- Mount the Faucet Body: Connect the main faucet body to the eccentric connectors. Hand-tighten first, then use a wrench to secure, ensuring not to overtighten. Use the provided washers to create a seal.
- Connect Shower Hose: Attach one end of the stainless steel shower hose to the outlet on the bottom of the mixer faucet.
- Install Handheld Shower Head: Connect the other end of the shower hose to the handheld shower head.
- Mount Shower Holder: Choose a suitable height and position on the wall for the fixed shower holder. Mark the drilling points, drill holes, insert wall plugs, and secure the holder with screws.
- Test for Leaks: Slowly turn on the main water supply and check all connections for any leaks.

Figure 5.1: A technical diagram illustrating the dimensions and connection points for the Ibergrif M12003 shower mixer faucet. It shows the G1/2" connections and the recommended wall mounting depth.

Figure 5.2: The Ibergrif M12003 shower mixer faucet and handheld shower head installed on a tiled bathroom wall above a bathtub, demonstrating a typical installation scenario with water flowing from the shower head.
6. Operation
The Ibergrif M12003 features a single lever for controlling both water flow and temperature.
- Water Flow Control: Lift the lever upwards to increase water flow. Push it downwards to decrease or stop the flow.
- Temperature Control: Move the lever to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve the desired water temperature.
- Diverter (if applicable): If your model includes a diverter, rotate or pull the knob to switch water flow between the main faucet outlet and the handheld shower head.

Figure 6.1: A close-up view of the single lever handle on the Ibergrif M12003 mixer faucet, showing the red (hot) and blue (cold) indicators for temperature adjustment.

Figure 6.2: A detailed view of the handheld shower head, highlighting its spray nozzles and ergonomic design, part of the Ibergrif M12003 set.
7. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Ibergrif M12003 shower set.
- Cleaning the Surface: Clean the faucet and shower head regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for stainless steel finishes. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
- Avoid Harsh Chemicals: Do not use abrasive sponges, scouring pads, or cleaners containing ammonia, bleach, or acids, as these can damage the finish.
- Cleaning Shower Head Nozzles: If water flow from the shower head becomes uneven, mineral deposits may be blocking the nozzles. Gently rub the rubber nozzles to dislodge deposits, or soak the shower head in a descaling solution if necessary.
- Check Connections: Periodically inspect all connections for tightness and signs of wear. Tighten any loose connections to prevent leaks.
8. Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged aerator/nozzles; low water pressure; partially closed stopcock | Clean shower head nozzles; check main water supply pressure; ensure stopcocks are fully open. |
| Water leaks from connections | Loose connections; worn washers/seals | Tighten connections; replace worn washers or seals. Ensure thread seal tape was used during installation. |
| Difficulty adjusting temperature | Cartridge issue; unbalanced hot/cold water pressure | Consult a plumber to inspect or replace the mixer cartridge; check water pressure balance. |
| No water from shower head | Diverter not engaged; blocked hose; main water supply off | Ensure diverter is correctly set; check hose for kinks or blockages; verify main water supply is on. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | M12003 |
| Brand | Ibergrif |
| Material | Stainless Steel |
| Finish | Nickel |
| Color | Grey |
| Number of Handles | 1 (Monomando) |
| Mounting Type | Wall Mount |
| Product Dimensions | 20 x 17 x 10.5 cm |
| Product Weight | 1.5 kg |
| UPC | 600358596097 |
10. Warranty and Support
Ibergrif products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Ibergrif website. For technical support or assistance with parts, please contact Ibergrif customer service.
You can find more information and contact details on the Ibergrif Brand Store.