1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ibergrif M12057 Star Shower Mixer Set. Please read these instructions carefully before installation and retain them for future reference. This product is designed for use in bathroom shower systems.
Image 1.1: The Ibergrif M12057 Star Shower Mixer Set, featuring a chrome mixer tap and a matching hand shower with hose, mounted on a wall.
2. Safety Information
- Always turn off the main water supply before beginning any installation or maintenance work.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the product's surface, as this may damage the chrome finish.
- Keep small parts out of reach of children.
3. Package Contents
Verify that all components listed below are present in your package:
- 1 x Shower Mixer Tap
- 1 x Installation Kit (includes S-connectors, wall plates, gaskets, screws, and wall plugs)
- 1 x 1.5 Meter Shower Hose
- 1 x Hand Shower
- 1 x Shower Holder
Image 3.1: All included components of the Ibergrif M12057 Star Shower Mixer Set, including the mixer tap, hand shower, hose, holder, and installation hardware.
4. Setup and Installation
The Ibergrif M12057 is designed for wall-mount installation. Standard European spacing for wall-mounted mixer taps is 150mm between the hot and cold water inlets. The provided S-connectors allow for minor adjustments to match existing plumbing.
Installation Steps:
- Prepare Water Supply: Turn off the main water supply to your bathroom. Drain any remaining water from the pipes.
- Remove Old Fixture (if applicable): Carefully remove your existing shower mixer tap. Clean the wall area.
- Install S-Connectors: Screw the S-connectors into the hot and cold water outlets in the wall. Ensure they are level and the correct distance apart (150mm center-to-center). Use thread seal tape for a watertight connection.
- Attach Wall Plates: Place the decorative wall plates over the S-connectors.
- Mount Mixer Tap: Connect the mixer tap to the S-connectors. Hand-tighten first, then use a wrench to secure, ensuring not to overtighten.
- Install Shower Holder: Choose a suitable height and position for the hand shower holder. Mark the drilling points, drill holes, insert wall plugs, and secure the holder with screws.
- Connect Shower Hose and Hand Shower: Attach one end of the 1.5-meter shower hose to the outlet on the mixer tap and the other end to the hand shower. Ensure gaskets are in place for a leak-free connection.
- Test for Leaks: Slowly turn the main water supply back on and check all connections for leaks.
Image 4.1: Technical diagram illustrating the dimensions of the mixer tap (213mm width, 150mm center-to-center for inlets) and hand shower (95mm width), along with an image of brass bars indicating the product's material.
5. Operating Instructions
The Ibergrif M12057 features a single lever handle for convenient control of water flow and temperature, and a hand shower with multiple spray modes.
Mixer Tap Operation:
- Water Flow: Lift the single lever handle to increase water flow. Push it down to decrease or stop the flow.
- Temperature Control: Move the lever handle left for hot water and right for cold water. Adjust to achieve your desired temperature.
Hand Shower Spray Modes:
The hand shower offers three distinct spray modes. Rotate the shower head's face or a designated selector (if present) to switch between modes:
- Spray: A standard, invigorating spray.
- ECO Spray: A water-saving spray mode.
- Massage: A focused, pulsating spray for a massaging effect.
Image 5.1: Visual representation of the three hand shower spray modes: a wide 'Spray', a concentrated 'ECO Spray', and a powerful 'Massage' spray.
Image 5.2: The mixer tap with indicators highlighting its water-saving capabilities, low noise operation, and the durable ceramic disc cartridge.
6. Maintenance
Regular cleaning and proper care will ensure the longevity and optimal performance of your Ibergrif shower mixer set. The high-shine chrome finish is designed for easy cleaning and maintenance.
- Cleaning: Clean the surfaces regularly with a soft cloth and mild soap or a non-abrasive liquid cleaner. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, bleach, or other harsh chemicals, as these can damage the chrome finish and internal components.
- Ceramic Disc Cartridge: The mixer tap is equipped with a ceramic disc cartridge, which is designed to reduce the risk of leaks and drips, contributing to the long service life of the tap. No regular maintenance is typically required for the cartridge itself, but if persistent dripping occurs, it may need inspection or replacement by a professional.
- Hand Shower Nozzles: Periodically clean the nozzles of the hand shower to remove limescale buildup. Many modern hand showers have flexible silicone nozzles that can be rubbed to dislodge deposits.
Image 6.1: Detailed close-up views of the Ibergrif M12057 mixer tap, showcasing its chrome finish and lever handle.
7. Troubleshooting
If you encounter any issues with your shower mixer set, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Partially closed stopcock, clogged aerator/nozzles, low water pressure in household. | Ensure stopcocks are fully open. Clean hand shower nozzles. Check household water pressure. |
| Water Dripping from Tap | Worn or faulty ceramic disc cartridge. | Contact customer support for cartridge replacement or professional inspection. |
| Inconsistent Water Temperature | Uneven water pressure, issue with hot/cold water supply. | Check hot and cold water supply lines for blockages or pressure imbalances. |
| Leaks at Connections | Loose connections, damaged gaskets, insufficient thread seal tape. | Turn off water supply. Tighten connections. Replace damaged gaskets. Reapply thread seal tape. |
If the problem persists after attempting these solutions, please contact Ibergrif customer support.
8. Specifications
| Brand | Ibergrif |
| Model Name | M12057 |
| Mounting Type | Wall Mount |
| Material | Brass (Body), Ceramic (Handle) |
| Colour | Silver (Chrome Finish) |
| Number of Handles | 1 (Single Lever) |
| Valve Type | Ceramic Disc Valve |
| Installation Method | Single Hole (for wall connection points) |
| Item Weight | 1.47 Kilograms |
| Included Components | Shower mixer tap, Installation kits, 1.5 M shower hose, Hand shower, Shower holder |
9. Warranty and Support
Ibergrif products are manufactured to high-quality standards. This product is covered by a 12-month exchange-return policy, ensuring customer satisfaction and product reliability. Additionally, the product adheres to Amazon's 30-day refund policy.
For technical assistance, warranty claims, or any questions regarding your Ibergrif M12057 Star Shower Mixer Set, please contact Ibergrif customer service. Our dedicated service and sales team is available to assist you.
Please have your model number (M12057) and purchase details ready when contacting support.