1. Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your iiglo GM200 Dual Monitor Mount. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
Always ensure the mounting surface can support the combined weight of the mount and monitors. Do not overtighten screws. Use appropriate tools. Keep small parts away from children. If you have any doubts, consult a qualified professional.
- Ensure all components are present and undamaged before installation.
- Do not exceed the maximum weight capacity of the mount.
- Tighten all screws firmly but do not overtighten.
- Perform regular checks to ensure the mount remains secure.
3. Package Contents
Verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact iiglo customer support.
Figure 3.1: Complete package contents of the iiglo GM200 monitor mount, showing all parts required for assembly.
- Dual Monitor Arms (2)
- Desk Clamp Base (1)
- Grommet Base Option (1)
- VESA Mounting Plates (2)
- Hardware Kit (screws, washers, spacers)
- Cable Management Clips
- Tools (Allen wrenches)
- USB and Audio Cables (integrated into base)
4. Setup and Installation
4.1 Choose Mounting Method (Clamp or Grommet)
The iiglo GM200 supports both C-clamp and grommet hole installation. Select the method best suited for your desk.
4.2 C-Clamp Installation
- Attach the C-clamp to the main pole.
- Position the clamp on the edge of your desk and tighten the knob until secure.
Figure 4.1: Front view of the assembled iiglo GM200 monitor mount, illustrating its dual arm design.
4.3 Attaching Monitors
- Attach the VESA plate to the back of your monitor using the provided screws. Ensure the screws are compatible with your monitor's VESA pattern (75x75mm or 100x100mm).
- Slide the monitor with the attached VESA plate onto the arm's mounting head. Secure it with the locking screw.
Figure 4.2: Detail of the VESA plate attachment to a monitor, highlighting the secure connection points.
Figure 4.3: Rear view of two monitors successfully mounted on the iiglo GM200, demonstrating cable routing.
5. Operating and Adjustments
The iiglo GM200 allows for various adjustments to achieve optimal viewing angles and ergonomic comfort.
5.1 Height Adjustment
The monitor arms feature gas spring mechanisms for smooth height adjustments. Gently push or pull the monitor to the desired height. If the monitor does not stay in place, adjust the tension screw on the arm.
Figure 5.1: The iiglo GM200 supporting two 30-inch monitors, showcasing its capacity and adjustability.
5.2 Tilt and Swivel
Monitors can be tilted up/down and swiveled left/right at the VESA plate connection. Loosen the tilt screw slightly if movement is too stiff, or tighten if too loose.
Figure 5.2: The iiglo GM200 arms extended, illustrating the range of motion for positioning monitors.
5.3 Rotation
Monitors can be rotated 360 degrees (portrait to landscape) without removing them from the mount.
5.4 Cable Management
Utilize the integrated cable management clips along the arms to route and conceal monitor cables for a tidy workspace.
Figure 5.3: Front view of the iiglo GM200 base, highlighting the convenient USB and audio ports.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your monitor mount.
- Cleaning: Wipe the mount with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Tightness Check: Periodically check all screws and connections to ensure they remain tight and secure. Retighten if necessary.
- Gas Spring Adjustment: If monitors sag or do not hold their position, adjust the gas spring tension using the provided Allen wrench. Turn clockwise to increase tension for heavier monitors, counter-clockwise for lighter monitors.
Figure 6.1: Gas spring tension adjustment point on the monitor arm.
7. Troubleshooting
- Monitor Sags/Doesn't Stay Up: The gas spring tension is too low for the monitor's weight. Increase tension by turning the adjustment screw clockwise.
- Monitor is Difficult to Move Up/Down: The gas spring tension is too high. Decrease tension by turning the adjustment screw counter-clockwise.
- Monitor Wobbles: Ensure all mounting screws (desk clamp/grommet and VESA plate) are securely tightened. Check if the desk surface is stable.
- USB/Audio Ports Not Working: Ensure the integrated USB and audio cables from the mount's base are properly connected to your computer's corresponding ports.
Figure 7.1: Integrated USB and audio ports on the mount base.
8. Specifications
| Feature | Specification |
|---|---|
| Model | GM200 |
| Brand | iiglo |
| Screen Size Compatibility | Up to 30 inches per monitor |
| VESA Compatibility | 75x75mm, 100x100mm |
| Mounting Options | C-Clamp, Grommet |
| Rotation | 360° (Portrait/Landscape) |
| Tilt Range | Adjustable |
| Swivel Range | Adjustable |
| Integrated Ports | USB, Microphone, Headphone |
9. Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official iiglo website. Please have your model number (GM200) and purchase details ready when contacting support.
Website: www.iiglo.com
