ZdalaMit 845042GF1XABH

Download PDF
Contents

ZdalaMit Replacement Remote Control User Manual

Model: 845042GF1XABH

Introduction

This manual provides instructions for the ZdalaMit replacement remote control, designed for use with various Element and Memorex television models. This remote control requires no programming or pairing; simply install batteries, and it is ready for operation.

Compatibility

This remote is compatible with the following TV models:

  • Element TV Models: FLW1920B, GF1917XA, ELCPO191, ELCPO321, ELCPO371, FLW1921B, FLW-1920B, FLW-1921B
  • Memorex TV Models: MLT1921, MLT3221, 845042GF1XABH

Package Contents

  • 1x ZdalaMit Replacement Remote Control (Model: 845042GF1XABH)

Note: AAA batteries are not included and must be purchased separately.

Setup

Follow these steps to prepare your remote control for use:

  1. Locate the Battery Compartment: Turn the remote control over. The battery compartment cover is typically located on the back of the remote.
  2. Open the Battery Compartment: Slide the battery compartment cover downwards or press the latch and lift to open.
  3. Insert Batteries: Insert two (2) 1.5V AAA alkaline batteries. Ensure the positive (+) and negative (-) terminals of the batteries match the polarity indicators inside the compartment.
  4. Close the Battery Compartment: Replace the battery compartment cover by sliding it back into place until it clicks securely.

The remote control is now ready for immediate use with compatible TV models. No additional programming or pairing is required.

Back view of the ZdalaMit remote control showing the battery compartment

Image: Back view of the remote control, illustrating the battery compartment location.

Operating Instructions

This section describes the primary functions of the buttons on your ZdalaMit replacement remote control.

Front view of the ZdalaMit remote control with all buttons visible

Image: Front view of the remote control, displaying all functional buttons.

  • POWER (Red Button): Turns the television on or off.
  • S.MODE: Selects sound modes (e.g., Standard, Music, Movie).
  • MTS: Multi-channel Television Sound selection.
  • P.MODE: Selects picture modes (e.g., Standard, Dynamic, Movie).
  • CAPTION: Activates or deactivates closed captions.
  • SLEEP: Sets a timer for the TV to automatically turn off.
  • P.SIZE: Adjusts the picture size or aspect ratio.
  • Number Buttons (0-9): Directly select channels.
  • JUMP: Switches between the current and previously viewed channel.
  • MUTE: Silences or restores the television's audio.
  • VOL +/-: Increases or decreases the volume level.
  • CH +/-: Changes the television channel up or down.
  • INPUT: Selects the input source (e.g., HDMI, AV, Component).
  • GUIDE: Displays the electronic program guide (if available).
  • EXIT: Exits from menus or on-screen displays.
  • Directional Arrows (Up, Down, Left, Right): Navigate through menus and options.
  • OK: Confirms selections in menus.
  • INFO: Displays information about the current program or input.
  • MENU: Opens the television's main menu.
  • LIST: Accesses a list of channels or recorded programs.
  • FAV.CH: Accesses favorite channels.
  • TIMER: Sets a timer function.
  • FREEZE: Pauses the current image on screen.
  • Colored Buttons (Red, Green, Yellow, Blue): These buttons typically correspond to specific functions within TV menus or interactive services, as indicated on the TV screen.

Maintenance

Proper care and maintenance will extend the life of your remote control.

  • Cleaning: Use a soft, dry cloth to wipe the surface of the remote control. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or solvents.
  • Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA alkaline).
  • Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage, which can damage the device. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Drops and Impacts: Protect the remote from physical shock, as this can damage internal components.

Troubleshooting

If you experience issues with your remote control, refer to the following common solutions:

ProblemPossible CauseSolution
Remote is not responding.
  • Dead or incorrectly inserted batteries.
  • Obstruction between remote and TV.
  • Remote sensor on TV is blocked.
  • Replace batteries with new AAA alkaline batteries, ensuring correct polarity.
  • Ensure there is a clear line of sight between the remote and the TV's infrared sensor.
  • Remove any objects blocking the TV's remote sensor.
Remote works intermittently.
  • Low battery power.
  • Interference from other electronic devices.
  • Replace batteries.
  • Move other electronic devices away from the TV or remote.
Specific buttons are not working.
  • Button stuck or damaged.
  • Function not supported by the TV model.
  • Gently press the button multiple times to dislodge any debris. If still unresponsive, the button may be damaged.
  • Verify if the specific function is available on your TV model.

If these solutions do not resolve the issue, please contact customer support.

Specifications

Model Number:845042GF1XABH
Brand:ZdalaMit
Power Supply:2 x 1.5V AAA Alkaline Batteries (not included)
Product Dimensions:6.6 x 1.8 x 0.5 inches (approximately)
Item Weight:1.41 ounces (without batteries)
Color:Black
Compatible Devices:Television (Element and Memorex models as listed in Introduction)

Support

For any questions or further assistance regarding your ZdalaMit replacement remote control, please contact our customer support. Refer to your purchase documentation or the retailer's website for contact information.

We are committed to providing support for our products.

© 2026 ZdalaMit. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.