ABLEGRID QuietOdio 10 Active Noise Cancelling Headphones User Manual

Introduction

Thank you for choosing the ABLEGRID QuietOdio 10 Active Noise Cancelling Headphones. These headphones are designed to provide a superior audio experience with advanced noise cancellation technology, Bluetooth 5.0 connectivity, and a comfortable over-ear design. This manual will guide you through the setup, operation, and maintenance of your headphones.

Product Features

• Active Noise Cancelling (ANC) Technology: Reduces ambient noise by up to 96% (up to 35dB) for an immersive listening experience.
• High-Quality Audio: Customized 40mm drivers with Apt-X support deliver accurate sound reproduction and deep bass.
• Comfortable Design: Soft protein earpads and a lightweight, foldable design ensure comfort for extended wear and portability.
• Bluetooth 5.0 Connectivity: Provides a stable and efficient wireless connection up to 50 feet.
• Built-in cVc 6.0 Microphone: Enables clear hands-free calls with enhanced voice clarity.
• Extended Playtime: Up to 40 hours of playtime in Bluetooth mode, or 30 hours with both Bluetooth and ANC active.

Package Contents

Please check the package for the following items:

• ABLEGRID QuietOdio 10 Active Noise Cancelling Headphones
• USB Charging Cable
• 3.5mm Audio Cable
• Travel Case
• User Manual (this document)

Controls and Indicators

Familiarize yourself with the headphone controls and indicators for optimal use.

Image: Front view of the ABLEGRID QuietOdio 10 headphones, showcasing the overall design and earcups.

Common Controls (Typical Layout):

• Power Button: Usually located on one earcup, used for powering on/off and Bluetooth pairing.
• Volume Buttons (+/-): Adjusts audio volume. Often also used for track skipping (long press).
• Multi-function Button (MFB): For play/pause, answer/end calls, and activating voice assistant.
• ANC Switch/Button: Toggles Active Noise Cancellation on or off.
• LED Indicator: Displays power status, charging status, and Bluetooth pairing status.
• Charging Port: USB port for charging the headphones.
• 3.5mm Audio Jack: For wired connection to audio sources.
• Microphone: Built-in for hands-free calls.

Setup

1. Charging the Headphones

1. Connect the small end of the USB charging cable to the charging port on the headphones.
2. Connect the larger end of the USB charging cable to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator will typically show a red light during charging and turn off or change to blue/green when fully charged.
4. A full charge takes approximately 2-3 hours.

2. Bluetooth Pairing

1. Ensure the headphones are fully charged before initial pairing.
2. With the headphones powered off, press and hold the Power button for approximately 5-7 seconds until the LED indicator flashes red and blue alternately. This indicates pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "QuietOdio 10" from the list of found devices.
5. Once paired, the LED indicator will typically flash blue slowly or turn solid blue, and you may hear an audible confirmation.
6. If a passcode is requested, enter "0000".

Note: The headphones will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

Power On/Off

• Power On: Press and hold the Power button for 2-3 seconds until the LED indicator flashes blue and you hear a power-on tone.
• Power Off: Press and hold the Power button for 3-4 seconds until the LED indicator flashes red and you hear a power-off tone.

Active Noise Cancellation (ANC)

Image: A person wearing the ABLEGRID QuietOdio 10 headphones in an urban environment, illustrating the noise-cancelling capability. The image highlights the ability to block out up to 96% of low and mid-range frequency noises.

Image: A person wearing the ABLEGRID QuietOdio 10 headphones while traveling on an airplane, demonstrating their effectiveness in reducing airplane engine noise for frequent flyers.

Image: An exploded view diagram of the ABLEGRID QuietOdio 10 headphones, detailing the internal components responsible for hybrid active noise cancellation, including feedforward and feedback ANC microphones.

• Locate the ANC switch or button on the headphones.
• Slide the switch or press the button to activate Active Noise Cancellation. An indicator light (often green) will illuminate.
• To deactivate ANC, slide the switch or press the button again. The indicator light will turn off.
• ANC can be used independently or simultaneously with Bluetooth audio.

Music Playback

Image: An internal view of the headphone's 40mm drivers, illustrating the components that contribute to exceptional music clarity and deep bass.

• Play/Pause: Press the Multi-function Button (MFB) once.
• Next Track: Long press the Volume Up (+) button.
• Previous Track: Long press the Volume Down (-) button.
• Volume Up: Short press the Volume Up (+) button.
• Volume Down: Short press the Volume Down (-) button.

Call Management

• Answer/End Call: Press the Multi-function Button (MFB) once.
• Reject Call: Press and hold the MFB for 2 seconds.
• Redial Last Number: Double-press the MFB.
• Activate Voice Assistant: Triple-press the MFB (if supported by your device).

Wired Mode

• Connect one end of the 3.5mm audio cable to the audio jack on the headphones.
• Connect the other end to the 3.5mm audio output of your device.
• In wired mode, Bluetooth and ANC functions may still be used, depending on the headphone design.
• The headphone's battery is still required for ANC functionality in wired mode.

Maintenance

Cleaning

• Wipe the headphones with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, solvents, or spray cleaners.
• Keep the charging port and audio jack free of dust and debris.

Storage

Image: The ABLEGRID QuietOdio 10 headphones folded and placed on a suitcase, demonstrating their portability and suitability for travel, along with a visual cue for 40-hour playtime.

• When not in use, store the headphones in their protective travel case to prevent damage.
• Avoid storing in extreme temperatures or high humidity.
• For long-term storage, charge the headphones to approximately 50% every few months to preserve battery life.

Image: A close-up view emphasizing the super-soft protein earpads of the ABLEGRID QuietOdio 10 headphones, with a baby sleeping on one earpad to highlight comfort.

Troubleshooting

Specifications

Warranty and Support

The ABLEGRID QuietOdio 10 headphones come with an 18-month warranty. For warranty claims, technical support, or any inquiries, please contact ABLEGRID customer service through the retailer where the product was purchased or visit the official ABLEGRID website for contact information.

Please retain your proof of purchase for warranty service.

Safety Information

• Do not expose the headphones to extreme temperatures, humidity, or liquids.
• Avoid dropping or subjecting the headphones to strong impacts.
• Do not attempt to disassemble or modify the headphones. This will void the warranty.
• Listen at moderate volumes to prevent hearing damage. Prolonged exposure to loud sounds can cause permanent hearing loss.
• Do not use headphones while driving, cycling, or in situations where you need to hear surrounding sounds.
• Keep out of reach of children.