Aerocool Bolt Mini MATX RGB PC Gaming Case User Manual

1. Product Overview

The AeroCool Bolt Mini is a high-performance mini tower PC case designed for MATX and Mini-ITX motherboards. It features a stylish Lightning Bolt RGB LED design on the front panel, a full tempered glass side panel, and a carbon fiber style front panel, offering a modern aesthetic for your gaming setup.

Key features include:

• Dynamic RGB Lighting: 13 preset lighting modes, including 6 RGB flow modes and 7 static color modes, controllable via an LED button.
• Tempered Glass Side Panel: A full tempered glass side panel allows for a clear view of your internal components.
• Optimized Cooling: Supports air cooling configurations with optional fan placements at the front (2x 120mm), top (2x 120mm), and rear (1x 120mm included). Liquid cooling support for 120mm radiators at the front and rear.
• Futuristic Design: Carbon fiber style front panel for a sleek and modern appearance.

2. Setup and Installation

This section provides guidance on setting up your AeroCool Bolt Mini case and installing components.

2.1 Physical Dimensions and Compatibility

• Dimensions (LxWxH): Approximately 15.43 x 7.91 x 14.96 inches (39.2 x 20.1 x 38.0 cm).
• Motherboard Compatibility: Supports Mini-ITX and Micro-ATX motherboards.
• Power Supply Mounting: Bottom mount.

2.2 Component Installation

Before beginning installation, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation instructions.

Figure 2.1: Front-left view of the AeroCool Bolt Mini case, showcasing the tempered glass side panel and the RGB LED strip on the front.

Figure 2.2: Interior view of the AeroCool Bolt Mini case, showing the motherboard mounting area, drive bays, and the pre-installed rear fan.

Figure 2.3: Front and rear view of the AeroCool Bolt Mini case, highlighting the carbon fiber style front panel and the rear I/O and fan mounting.

Figure 2.4: Top view of the AeroCool Bolt Mini case, showing the front I/O panel with USB ports and audio jacks.

2.2.1 Motherboard Installation

1. Remove the side panels.
2. Install the I/O shield into the rear opening of the case.
3. Align your Micro-ATX or Mini-ITX motherboard with the standoffs and gently place it into position.
4. Secure the motherboard with screws.

2.2.2 Storage Drive Installation

The case supports various storage configurations. Refer to the internal layout for specific drive bay locations.

2.2.3 Power Supply Installation

Install your ATX power supply into the bottom mounting area of the case. Secure it with screws from the rear.

2.2.4 Cooling System Installation

The case comes with one 120mm black fan pre-installed at the rear. Additional fans or radiators can be installed as follows:

• Front: Supports 2 x 120mm fans or a 120mm radiator.
• Top: Supports 2 x 120mm fans.
• Rear: Supports 1 x 120mm fan (included) or a 120mm radiator.

3. Operating Instructions

3.1 Front Panel I/O

The top front panel provides convenient access to essential ports and controls:

• Power Button: To turn your system on or off.
• Reset Button: To restart your system.
• USB Ports: Includes USB 2.0 ports for connecting peripherals.
• Audio Jacks: For headphones and microphone.

3.2 RGB Lighting Control

The AeroCool Bolt Mini features an integrated RGB LED strip on the front panel with 13 lighting modes. These modes can be cycled using the dedicated LED control button located on the top panel.

• 6 RGB Flow Modes: Dynamic lighting effects that cycle through colors.
• 7 Static Color Modes: Solid color illumination (e.g., Red, Green, Blue, Yellow, Cyan, Purple, White).

Press the LED control button repeatedly to cycle through the available lighting modes. Hold the button for a few seconds to turn off the RGB lighting.

4. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your PC case and components.

4.1 Cleaning the Case

• Exterior: Use a soft, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners or solvents.
• Tempered Glass Panel: Clean the tempered glass with a glass cleaner and a microfiber cloth to prevent streaks. Do not apply excessive force.
• Dust Filters: Periodically remove and clean any dust filters (e.g., top magnetic filter, PSU filter) to maintain good airflow. Rinse with water if necessary and ensure they are completely dry before reinstallation.
• Interior: Use compressed air to blow out dust from inside the case, especially around fans and components. Ensure the system is powered off and unplugged before cleaning the interior.

5. Troubleshooting

This section addresses common issues you might encounter with your PC case.

5.1 RGB Lighting Not Functioning

• Check Connections: Ensure the RGB LED strip is properly connected to the case's internal controller and that the controller is powered (usually via a SATA power connector from your PSU).
• LED Button: Press the LED control button to cycle through modes. If it's unresponsive, check the button's internal connection to the controller.
• Power Cycle: Turn off your PC, unplug it from the wall, wait 30 seconds, then plug it back in and restart.

5.2 Poor Airflow or Overheating

• Clean Dust Filters: Ensure all dust filters are clean and not obstructed.
• Fan Orientation: Verify that installed fans are oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
• Cable Management: Poor cable management can obstruct airflow. Reroute cables behind the motherboard tray where possible.
• Add More Fans: Consider installing additional fans in available mounting locations to improve cooling.

5.3 Front Panel Ports Not Working

• Check Motherboard Connections: Ensure the USB and audio headers from the front panel are securely connected to the correct pins on your motherboard.
• Driver Issues: For audio, ensure your motherboard's audio drivers are up to date.

6. Specifications

7. Warranty and Support

AeroCool products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official AeroCool website.

For technical support, troubleshooting assistance, or inquiries regarding your AeroCool Bolt Mini case, please contact AeroCool customer service through their official support channels.

Manufacturer: Aerocool

Brand: AeroCool