Pellon SF101 Shape-Flex Cotton Woven Fusible Interfacing User Manual

1. Product Overview

The Pellon SF101 Shape-Flex is an all-purpose, woven, fusible interfacing designed to provide crisp support and permanent stability for various sewing and craft projects. It is made from 100% cotton and is suitable for use with light to medium-weight woven and knit fabrics.

Image 1.1: A roll of Pellon SF101 Shape-Flex Cotton Woven Fusible Interfacing, white in color, showing the product label.

2. Key Features

• Material: 100% Cotton.
• Type: Woven, fusible interfacing.
• Support: Provides crisp support for collars, cuffs, yokes, pockets, facings, and other detailed garment areas.
• Stability: Adds body and permanent stability when used as a backing for needlework and punch embroidery.
• Fabric Compatibility: Intended for light to medium woven and knit fabrics, including oxford cloth, chambray, gingham, madras, tattersall, pincord, flannel, and polyester/cotton blends.
• Dimensions: 20 inches wide x 10 yards long.

3. Preparation

1. Pre-test: Always pre-test with a swatch of your fabric prior to use to ensure compatibility with the fusible interfacing.
2. Pre-wash Fabric: It is recommended to pre-wash all fabrics to remove any coatings that might interfere with the fusible bond. Do not use fabric softener.
3. Cutting: Pin the pattern piece to the Shape-Flex, following the grainline arrows. Trim seam allowances to 1/8 inch.

4. Application Instructions

Follow these steps to properly apply Pellon SF101 Shape-Flex to your fabric:

1. Placement: Place the fusible (rough) side of the Shape-Flex onto the wrong side of the fabric.
2. Cover: Cover the Shape-Flex and fabric with a thin, damp pressing cloth.
3. Ironing: Using a wool/steam setting on your iron, press firmly for 10-15 seconds. Ensure the iron is moved slowly and evenly over the entire surface to create a strong bond.
4. Cooling: Allow the fabric to cool completely before handling to ensure the bond is set.

5. Care and Maintenance

Proper care will help maintain the integrity of your projects:

• Washing: Machine wash warm or gentle cycle.
• Drying: Tumble dry medium or low.
• Ironing: Iron at a wool/steam setting if needed.
• Dry Cleaning: This product is also suitable for dry cleaning.

6. Safety Information

When using heat-activated products, always exercise caution:

• Always use an iron or heat press according to its manufacturer's instructions.
• Keep hot appliances away from children and pets.
• Ensure adequate ventilation when using steam.
• Do not leave hot appliances unattended.

7. Specifications

8. Support Information

For further assistance or inquiries regarding your Pellon SF101 Shape-Flex Interfacing, please refer to the manufacturer's official website or contact their customer support. Specific warranty details are typically provided with the product packaging or on the manufacturer's website.