Introduction
The Sharper Image Jellyfish Aquarium is designed to create a captivating and calming visual experience in any indoor setting. This unique decorative item features three realistic rubber jellyfish that move gracefully within the illuminated water, mimicking the natural motion of live jellyfish. The aquarium offers multiple color modes to enhance its visual appeal and includes an automatic shut-off timer for convenience and energy saving.
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Jellyfish Aquarium to ensure optimal performance and enjoyment.
Package Contents
- Jellyfish Aquarium Unit
- 3 x Lifelike Rubber Jellyfish
- USB Power Cable
- Instruction Manual (this document)
Setup
- Placement: Choose a flat, stable surface away from direct sunlight, heat sources, and strong air currents. Ensure the surface can support the weight of the aquarium when filled with water.
- Fill with Water: Carefully remove the top lid. Fill the aquarium with distilled water up to the fill line indicated inside the tank. Using distilled water helps prevent mineral buildup and keeps the jellyfish floating properly.
- Insert Jellyfish: Gently place the three rubber jellyfish into the water. If they do not immediately sink, use a non-abrasive stick or your finger to push them down until they are fully submerged and free of air bubbles. Air bubbles trapped inside the jellyfish can prevent them from floating correctly.
- Secure Lid: Replace the top lid firmly to prevent evaporation and spills.
- Connect Power: Insert the small end of the USB power cable into the port on the back of the aquarium base. Plug the larger end into a compatible USB power adapter (not included) or a USB port on a computer.
- Initial Operation: Press the power button on the base to turn on the aquarium. The internal pump will activate, and the LED lights will illuminate.
Image: The Jellyfish Aquarium fully assembled and illuminated with blue light, showcasing the three artificial jellyfish.
Operating Instructions
The Jellyfish Aquarium features simple controls for power and color mode selection.
- Power Button: Located on the front of the base. Press once to turn the unit ON. Press again to cycle through the color modes. Press and hold for 3 seconds to turn the unit OFF.
- Color Modes: The aquarium cycles through five distinct color modes:
- Blue
- Red
- Green
- Purple
- Color Cycle (automatically transitions between all colors)
- Automatic Shut-off Timer: The aquarium is equipped with a 4-hour automatic shut-off timer. After 4 hours of continuous operation, the unit will automatically power down to conserve energy. To restart, simply press the power button.
Image: A detailed view of two artificial jellyfish, showing their lifelike appearance and the vibrant illumination within the aquarium.
Image: The Jellyfish Aquarium displaying a red and purple light mode, highlighting the dynamic movement of the jellyfish.
Maintenance
Regular maintenance ensures the longevity and optimal appearance of your Jellyfish Aquarium.
- Water Replacement: It is recommended to replace the water every 2-4 weeks, or sooner if the water appears cloudy or discolored. Always use distilled water.
- Cleaning the Tank: Before refilling, gently wipe the inside surfaces of the tank with a soft, lint-free cloth to remove any residue. Do not use abrasive cleaners or harsh chemicals.
- Jellyfish Cleaning: If the rubber jellyfish accumulate any film or residue, gently rinse them under clean water. Ensure no soap or cleaning agents are used.
- Pump Maintenance: The internal pump is designed for low maintenance. If you notice reduced water flow or unusual noise, ensure the water level is adequate and there are no obstructions. Do not attempt to disassemble the pump.
- Storage: If storing the aquarium for an extended period, empty all water, clean the unit thoroughly, and allow it to air dry completely before storing in a cool, dry place.
Image: A close-up view of the three artificial jellyfish, showing their detailed design and the green light setting of the aquarium.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jellyfish do not float or move properly. | Air bubbles trapped inside jellyfish or insufficient water level. | Gently push jellyfish down to release air bubbles. Ensure water is filled to the recommended level. Use distilled water. |
| Aquarium does not turn on. | No power connection or faulty power source. | Check USB cable connection. Try a different USB power adapter or port. |
| Water appears cloudy or discolored. | Mineral buildup or impurities in water. | Replace water with fresh distilled water. Clean the inside of the tank. |
| Pump noise is loud. | Low water level or air in the pump. | Ensure water is filled to the correct level. Allow a few minutes for air to clear from the pump. |
Specifications
- Brand: Sharper Image
- Model: B081D82MYC
- Included Components: 3 x Rubber Jellyfish
- Power Source: USB (Adapter not included)
- Automatic Timer: 4-hour shut-off
- Material: Plastic (Aquarium), Rubber (Jellyfish)
- Dimensions: (Approximate, based on visual estimation from images) Height: 10-12 inches, Diameter: 4-5 inches. (Note: Specific dimensions not provided in product data, this is an estimate for manual completeness)
- UPC: 854284008999
Warranty and Support
The Sharper Image Jellyfish Aquarium is backed by a manufacturer's warranty. For specific warranty details, including coverage and duration, please refer to the warranty card included with your product or visit the official Sharper Image website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Sharper Image Customer Service. Contact information can typically be found on the product packaging or their official website: www.sharperimage.com.
Please have your model number (B081D82MYC) and purchase date ready when contacting support.