1. Product Overview
The YA-MAN Double Peeling Premium myse MS-40P-1 is an advanced facial beauty device designed for comprehensive skin care. It utilizes ultrasonic technology to provide deep cleansing and gentle peeling, helping to remove impurities and dead skin cells for a smoother, clearer complexion. This device is suitable for regular use as part of your skincare routine.
Image 1.1: The YA-MAN Double Peeling Premium myse MS-40P-1 device.
2. Safety Information
Please read all safety instructions carefully before using the device. Failure to follow these instructions may result in injury or damage to the device.
- Do not use on broken, irritated, or infected skin.
- Avoid using the device if you have a skin condition, severe acne, or are undergoing dermatological treatment. Consult a physician before use.
- Keep the device away from water sources when charging. The device is water-resistant for use, but not for charging.
- Do not use if you are pregnant, have a heart condition, or have a pacemaker.
- Keep out of reach of children.
- Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
- Use only the provided charging cable and adapter.
3. Package Contents
Verify that all items are present in the package:
- YA-MAN Double Peeling Premium myse MS-40P-1 Main Unit
- Charging Cable (USB)
- Charging Stand
- User Manual
4. Setup
4.1 Initial Charging
- Connect the charging cable to the charging stand.
- Plug the USB end of the cable into a suitable USB power adapter (not included) or a computer USB port.
- Place the device onto the charging stand. Ensure the charging indicators light up.
- Charge the device for approximately 3-4 hours before first use, or until the charging indicator shows a full charge.
4.2 Attaching the Peeling Head
The device comes with a pre-attached peeling head. If you need to re-attach or clean it, ensure it clicks securely into place.
Image 4.1: Close-up of the device's peeling head.
5. Operating Instructions
5.1 Preparation
- Cleanse your face thoroughly before use.
- Ensure your skin is wet. You can use water, toner, or a suitable facial mist. The device requires a wet surface for optimal performance.
5.2 Powering On/Off
Press and hold the power button for 2 seconds to turn the device on or off.
5.3 Mode Selection
Once powered on, press the power button briefly to cycle through the available modes. Refer to the indicator lights for the selected mode.
- Peeling Mode: For deep cleansing and exfoliation.
- Moisturizing Mode: For enhancing the absorption of skincare products.
5.4 Usage Guidelines
- Select your desired mode.
- Gently glide the peeling head across your wet skin. For peeling, move the device slowly against the direction of your pores. For moisturizing, glide it smoothly over your skin.
- Avoid pressing too hard or staying in one spot for too long.
- Use for approximately 5-10 minutes per session, 2-3 times a week, depending on your skin type and sensitivity.
- After use, turn off the device and clean it immediately.
Image 5.1: Example of using the device on the face.
6. Maintenance
6.1 Cleaning the Device
- After each use, turn off the device.
- Wipe the peeling head and the main unit with a soft, damp cloth.
- Do not use abrasive cleaners, alcohol, or harsh chemicals.
- Ensure the device is completely dry before storing or charging.
6.2 Storage
Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device fully. |
| Device not charging. | Charging cable or stand not properly connected. | Ensure all connections are secure. Try a different USB power source. |
| No peeling effect. | Skin is not wet enough; incorrect angle; device not in peeling mode. | Ensure skin is thoroughly wet. Adjust the angle of the device. Verify peeling mode is selected. |
| Skin irritation after use. | Overuse; sensitive skin; pressing too hard. | Reduce frequency/duration of use. Apply less pressure. If irritation persists, discontinue use and consult a dermatologist. |
8. Specifications
- Brand: YA-MAN
- Model: MS-40P-1
- Product Type: Ultrasonic Facial Device
- Recommended Skin Type: Normal Skin
- Unit Count: 1
- ASIN: B0819T5LGY
9. Warranty & Support
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official YA-MAN website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact YA-MAN customer service through their official website or the contact information provided in your warranty documentation.