SURKER Hair Clippers User Manual

1. Introduction

Thank you for choosing the SURKER Hair Clippers. This professional grooming kit is designed for precise and comfortable hair cutting and beard trimming. Please read this manual thoroughly before use to ensure proper operation, maintenance, and safety.

2. Safety Information

• Keep away from water. This appliance is not waterproof and should not be used near water or in wet conditions.
• Handle with care. Avoid dropping the clipper as it may damage the internal components or blades.
• Avoid using while charging. For optimal battery life and safety, do not operate the clipper while it is connected to the charger.
• Keep out of reach of children.
• Do not disassemble the clipper. Refer to qualified personnel for repairs.
• Use only the provided charging cable.

3. Product Overview & Components

The SURKER Hair Clipper kit includes the following items:

• SURKER Hair Clipper (Model: K7S-golden)
• USB Fast-Charge Cable
• 8 Guide Combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 16mm, 19mm)
• Cleaning Brush
• Lubricating Oil
• User Manual (this document)

Image: SURKER Hair Clipper, various guide combs, USB charging cable, and cleaning accessories.

4. Setup

4.1 Initial Charging

Before first use, ensure the clipper is fully charged. The LED display will show the battery percentage.

1. Connect the USB fast-charge cable to the charging port at the bottom of the clipper.
2. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer's USB port.
3. Charge for approximately 3 hours for a full charge, providing up to 240 minutes of run time. The LED display will indicate 100% when fully charged.

Image: The SURKER Hair Clipper connected to a USB cable for charging, showing the LED display.

4.2 Attaching Guide Combs

The clipper comes with 8 guide combs for various cutting lengths.

1. Select the desired guide comb (e.g., 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 16mm, 19mm).
2. Align the comb with the clipper blade and push it firmly until it clicks into place. Ensure it is securely attached.
3. To remove, gently pull the comb away from the blade.

Image: The SURKER Hair Clipper demonstrating the attachment of a guide comb, with various comb sizes displayed.

5. Operating Instructions

5.1 Basic Hair Cutting

1. Ensure the clipper is fully charged and the desired guide comb is attached.
2. Turn on the clipper using the power switch.
3. Adjust the thumb taper lever (0.8mm to 2.0mm) for fine-tuning the cutting length.
4. Begin cutting hair against the direction of hair growth, using smooth, even strokes.
5. For best results, keep the blades clean during use by periodically brushing away hair clippings.

Image: A man receiving a haircut using the SURKER Hair Clippers, demonstrating its use for precise cutting.

5.2 Beard Trimming

The clipper is also suitable for beard trimming and grooming.

1. Select a longer guide comb initially and gradually reduce the length as desired.
2. Trim your beard in the direction of hair growth for a smoother finish.
3. Use the clipper without a comb for precise edging and detailing around the neckline and beard lines.

Image: A man using the SURKER Hair Clippers to trim his beard, highlighting its versatility for facial hair grooming.

6. Maintenance

6.1 Cleaning the Blades

Regular cleaning ensures optimal performance and extends the life of your clipper.

1. After each use, turn off the clipper and remove any attached guide comb.
2. Use the provided cleaning brush to remove loose hairs from the blades and the clipper body.
3. For a more thorough cleaning, you may carefully detach the blade assembly (refer to product diagrams if available) and brush away trapped hairs.

6.2 Oiling the Blades

To maintain blade sharpness and smooth operation, oil the blades regularly.

1. Apply a few drops of the provided lubricating oil evenly across the top and sides of the blades.
2. Turn on the clipper for a few seconds to allow the oil to distribute evenly.
3. Wipe off any excess oil with a soft cloth.

7. Troubleshooting

8. Specifications

• Model: K7S-golden
• Brand: SURKER
• Blade Material: High-carbon steel
• Adjustable Taper Lever: 0.8mm to 2.0mm
• Guide Combs: 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 16mm, 19mm
• Battery Type: Rechargeable (1 AAA battery included)
• Charging Time: Approximately 3 hours
• Run Time: Up to 240 minutes
• Product Dimensions: 6.42 x 9.41 x 2.91 inches; 1.43 Pounds
• Item Weight: 650 Grams
• Country of Origin: China

9. Warranty & Support

Please feel free to contact us if you encounter any problems with your SURKER Hair Clippers. We are committed to providing a satisfactory solution.

For further assistance, please refer to the contact information provided with your purchase or visit the official SURKER website.