Brondell Swash EcoSeat S102 Non-Electric Dual Temperature Bidet Toilet Seat User Manual

1. Introduction

The Brondell Swash EcoSeat S102 is a non-electric bidet toilet seat designed to provide a hygienic and refreshing wash. This model features a dual nozzle system for both rear and front washes, adjustable water pressure, and the option for dual temperature water without requiring an electrical outlet. It is specifically designed to fit elongated toilets and includes a gentle-closing seat and lid for enhanced user experience.

Image 1: Top view of the Brondell Swash EcoSeat S102 Bidet Toilet Seat.

2. Safety Information

• Do not use abrasive cleaners, brushes, or chemical products on the bidet seat, as these can damage the surface and internal components.
• Ensure all connections are secure and leak-free before use.
• This product is designed for use with standard plumbing connections. Do not modify the product or use non-approved parts.
• Avoid exposing the unit to extreme temperatures.
• Keep out of reach of children.

3. Package Contents

Verify that all components are present before beginning installation:

• Brondell Swash EcoSeat S102 Bidet Toilet Seat
• Adjustable Mounting Bracket
• Mounting Bolts (2)
• Barrel Nuts (2)
• T-Valve (for cold water connection)
• Bidet Hose (for cold water connection)
• Hot Water Flex Tubing (81 inches, for optional warm water connection)

Image 2: Included components for installation of the bidet seat.

4. Product Overview

The Brondell Swash EcoSeat S102 features intuitive controls and a streamlined design. Key features include:

• Dual Nozzle System: Separate nozzles for rear and front washes, which are self-cleaning and retractable.
• Water Temperature Control: A dial to adjust water temperature from cold to warm (requires hot water connection).
• Water Pressure Control & Nozzle Selection: A dial to select between rear and front wash and adjust water pressure.
• Gentle-Close Seat and Lid: Prevents slamming and reduces noise.
• Quick-Release Button: Allows for easy removal of the seat for thorough cleaning.

Image 3: Control dials for water temperature and pressure/nozzle selection.

Image 4: Dual retractable nozzles for hygienic washing.

Image 5: Quick-release button and gentle-close seat feature.

5. Installation

The Brondell Swash EcoSeat S102 is designed for easy self-installation without the need for an electrician or plumber. Ensure your toilet is an elongated model for proper fit.

Image 6: Comparison of round and elongated toilet bowl sizes. The S102 fits elongated toilets.

Installation Steps:

1. Remove Existing Toilet Seat: Lift the hinge covers and use a screwdriver to remove the mounting bolts. Remove the old seat.
2. Install T-Valve: Turn off the water supply to your toilet. Flush the toilet to drain the tank. Disconnect the existing water supply hose from the toilet tank fill valve. Install the provided T-valve onto the toilet tank fill valve. Reconnect the toilet water supply hose to the bottom of the T-valve.
3. Connect Bidet Hose: Connect one end of the bidet hose to the side of the T-valve and the other end to the water inlet on the bidet seat.
4. (Optional) Connect Hot Water Flex Tubing: For warm water functionality, connect the 81-inch hot water flex tubing to the hot water inlet on the bidet seat. Route the tubing to a nearby hot water supply (e.g., under a sink) and connect it using appropriate fittings (not included). Do not substitute the provided tubing.
5. Install Mounting Bracket: Place the adjustable mounting bracket over the toilet bolt holes. Insert the mounting bolts through the bracket and toilet holes, securing them from underneath with barrel nuts. Adjust the bracket position to align with the bidet seat.
6. Attach Bidet Seat: Slide the bidet seat onto the mounting bracket until it clicks into place.
7. Restore Water Supply: Slowly turn on the water supply to the toilet. Check for any leaks at all connections.

Image 7: Side view of the bidet seat installed, highlighting the water connections.

6. Operating Instructions

The Brondell Swash EcoSeat S102 is operated using two side-mounted dials.

• Water Temperature Control Dial: Rotate this dial to select your desired water temperature, from cold to warm. If the hot water flex tubing is not connected, only cold water will be available.
• Water Pressure Control & Nozzle Selection Dial: This dial controls both the wash mode and water pressure.
  
  • Turn the dial towards 'FRONT' for a feminine wash.
  • Turn the dial towards 'REAR' for a posterior wash.
  • The further you turn the dial, the higher the water pressure will be.
  • Return the dial to 'OFF' to stop the wash and retract the nozzles.

For optimal performance, ensure you are seated on the bidet seat when operating the wash functions.

7. Maintenance & Cleaning

Regular cleaning ensures optimal hygiene and extends the life of your bidet seat.

• Nozzle Cleaning: The nozzles are self-cleaning. They rinse themselves before and after each use. For a more thorough manual cleaning, gently pull out the nozzles and wipe them with a soft cloth and mild soap.
• Seat Cleaning: Use a soft cloth and a mild, non-abrasive cleaner to wipe down the bidet seat and lid. The quick-release button allows for easy removal of the seat from the toilet for more thorough cleaning of both the seat and the toilet bowl area.
• General Cleaning: Avoid using harsh chemical cleaners, bleach, or abrasive pads, as these can damage the plastic surfaces and chrome finishes.

8. Troubleshooting

9. Specifications

10. Warranty & Support

The Brondell Swash EcoSeat S102 comes with a 1-year limited manufacturer's warranty when purchased from an authorized seller. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or customer support, please contact Brondell directly or visit their official website. You can find more information and contact details on the Brondell Store on Amazon.