Swagtron Swagboard Pro T1 Hoverboard Electric Self-Balancing Scooter User Manual

1. Introduction

The Swagtron Swagboard Pro T1 is a highly popular self-balancing electric scooter designed for personal transportation. This device utilizes gyroscopic technology to provide a dynamic and responsive riding experience. Steering and stopping are controlled by shifting your body weight, allowing for intuitive operation. The T1 is built with quality components and incorporates industry-leading safety features.

2. Safety Information

Your safety is paramount. Please read and understand all instructions and warnings before operating the Swagboard Pro T1.

• UL 2272 Certified: The SWAGTRON T1 is UL 2272 certified, indicating it has passed comprehensive electrical, mechanical, environmental, and material/component safety tests.
• Weight Limits: The hoverboard supports a maximum weight of 220 lbs (100 kg) and a minimum weight of 44 lbs (20 kg).
• Charging: Charge the device for approximately 1 hour for a full charge. Avoid overcharging to preserve battery life.
• Safety Gear: Always wear appropriate safety gear, including a helmet and protective pads, when operating the hoverboard.
• Pre-Use Check: Refer to the User Manual before each use. If you hear a loud sound from the wheel, it may be caused by packing material stuck between the wheel and the plastic housing.

3. What's in the Box

Upon unboxing your Swagboard Pro T1, ensure all the following components are present:

• Swagtron Swagboard Pro T1 (2 Wheel Scooter)
• Charging Adapter
• User Manual

4. Product Features

The Swagtron Swagboard Pro T1 Hoverboard in black.

Performance

• Top Speed: Up to 8 mph (12.8 km/h)
• Range: Up to 7-12 miles (11-19 km) on a single charge
• Motor: Upgraded 250 Watt motor with gear stabilization for enhanced control and downhill traction.

The hoverboard features an upgraded 250 watt motor which can help it climb slopes as steep as 30 degrees.

Safety & Technology

• UL 2272 Certified: Ensures the device meets high safety standards.
• SentryShield Battery: Patented SWAGTRON SentryShield smart battery management system provides multi-layered protection.
• LED Headlights & Indicators: Features LED headlights for visibility and battery/system indicators to alert you to status or potential errors.

The T1 self-balancing scooter features a system and battery indicator to alert you to any possible errors.

Design & Comfort

• Rubber Bumpers: Protects the hoverboard from scratches and impacts.
• Slip-Resistant Rubber Pedals: Non-slip footpads provide better traction and stability.
• Built-In Bluetooth Speaker: Allows for audio playback during rides.

LED headlights and bumpers light your way and protect your T1 from scratching.

Non-slip footpads allow you to maintain better traction and stability as you ride.

5. Setup

Initial Charging

Before first use, fully charge your Swagboard Pro T1. The charging time is approximately 1 hour for a full charge. Avoid overcharging the battery to prolong its lifespan.

Powering On/Off

Locate the power button on the hoverboard. Press it to turn the device on or off. The system indicator light will illuminate when the device is powered on.

Initial Calibration

It is crucial to calibrate your hoverboard before its first use and after any significant impacts or uneven riding experiences. Calibration ensures the gyroscopic sensors are properly aligned for stable operation.

To calibrate, ensure the hoverboard is turned off and placed on a perfectly flat, level surface. Press and hold the power button for several seconds until the indicator lights flash or a confirmation sound is heard. Release the button and turn the hoverboard off, then on again. It should now be calibrated.

6. Operating Instructions

Riding Modes

The Swagboard Pro T1 features two riding modes:

• Learning Mode: Designed for beginners, this mode limits speed and responsiveness to help new riders learn at their own pace.
• Standard Mode: Offers full speed and responsiveness for experienced riders.

The T1 offers a learning mode for beginners to allow them to learn how to ride at their own pace.

Mounting and Steering

To mount, place one foot firmly on a footpad, then quickly step on with the other foot. Maintain balance by keeping your body upright and relaxed. To steer, gently lean your body in the desired direction. Leaning forward will move the hoverboard forward, and leaning backward will slow it down or move it backward. To turn, apply slight pressure with one foot while relaxing the other.

7. Maintenance

Battery Care

• Charge the hoverboard for 4-5 hours per charge cycle.
• Avoid overcharging to preserve battery life.
• For long-term storage, ensure the battery is fully charged before storing.
• Do not let the battery drain completely to zero.

Calibration

Regular calibration is essential for optimal performance. If the hoverboard feels unbalanced, vibrates, or moves unevenly, recalibration is recommended. Place the hoverboard on a level surface, turn it off, then press and hold the power button until the lights flash or a sound is heard. Release, turn off, then turn on again.

Cleaning

Use a soft, damp cloth to clean the exterior of the hoverboard. Avoid using harsh chemicals or abrasive materials.

8. Troubleshooting

• Loud Sound from Wheel: This is most commonly caused by packing material getting stuck between the wheel and the plastic housing. Inspect and remove any obstructions.
• Vibration or Uneven Movement: This indicates the hoverboard may be out of calibration. Follow the calibration steps in the Maintenance section.
• Board Not Responding: Ensure the battery is charged and the device is powered on. If issues persist, attempt recalibration.

9. Specifications

10. Warranty and Support

The Swagtron Swagboard Pro T1 comes with a 1 Year Limited Warranty. For warranty claims, technical support, or further inquiries, please refer to the contact information provided in your included User Manual or visit the official Swagtron website.