Introduction
The Alfred WB1 Connect WI-FI Bridge is designed to enhance the functionality of your Alfred DB1 and DB2 Series Smart Locks. This hub enables remote control and monitoring of your locks via the internet, providing convenience and enhanced home security. By connecting your smart lock through this bridge, you can manage access from anywhere, receive instant alerts, and integrate with voice control systems like Amazon Alexa.
Product Overview
Figure 1: Alfred WB1 Connect WI-FI Bridge, angled view. This image shows the compact, white, oval-shaped device with the Alfred logo and a central speaker-like grille.
Figure 2: Alfred WB1 Connect WI-FI Bridge, front view. This image provides a direct frontal view of the device, highlighting the Alfred branding and the central grille.
Figure 3: Alfred WB1 Connect WI-FI Bridge, side view. This image displays the side of the device, revealing a USB port for power connection.
Setup Instructions
- Unboxing: Carefully remove the Alfred WB1 Connect WI-FI Bridge from its packaging. Ensure all components are present.
- Power Connection: Connect the provided power adapter to the WB1 Bridge and plug it into a standard electrical outlet. The device will power on automatically.
- Placement: Position the WB1 Bridge within Bluetooth range of your Alfred DB1 or DB2 Series Smart Lock(s). For optimal performance, place it in a central location, free from obstructions.
- App Installation: Download the Alfred Home app from your device's app store (available on iOS and Android).
Figure 4: BILT 3D Interactive Instructions for Alfred products. This image shows a promotional graphic for the BILT app, which offers 3D interactive instructions for assembly or installation of Alfred products. Users can download the app and search for Alfred to find product guides.
- Pairing with Alfred Lock:
- Open the Alfred Home app and create an account or log in.
- Follow the in-app instructions to add a new device. Select the WB1 Connect WI-FI Bridge.
- The app will guide you through the process of pairing the bridge with your existing Alfred Smart Lock(s). Ensure your lock is in pairing mode as per its specific manual.
- WI-FI Configuration: Once paired with the lock, the app will prompt you to connect the WB1 Bridge to your home WI-FI network. Select your network and enter the password.
Operating Instructions
The Alfred WB1 Connect WI-FI Bridge facilitates remote operation of your Alfred Smart Locks. All primary operations are performed through the Alfred Home mobile application.
- Remote Lock/Unlock: From the Alfred Home app, you can remotely lock or unlock your connected Alfred Smart Locks from anywhere with an internet connection.
- Real-time Status: View the current status of your locks (locked/unlocked) in real-time through the app.
- User Management: Add, modify, or delete user access codes for your locks remotely.
- Activity Log: Access a detailed history of lock activity, including who unlocked the door and when.
- Instant Alerts: Configure the app to receive push notifications for various events, such as when someone enters your home using a specific PIN code or when the lock battery is low.
- Voice Control Integration: If you have an Amazon Alexa device (sold separately), enable the Alfred skill in the Alexa app. Follow the Alexa app instructions to link your Alfred account and control your locks using voice commands.
- Controlling Multiple Locks: A single WB1 Connect unit can control multiple Alfred locks, provided they are within Bluetooth range of the bridge.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the WB1 Bridge. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Alfred Home app for available firmware updates for your WB1 Bridge. Keeping the firmware updated ensures optimal performance and security.
- Power Supply: Ensure the WB1 Bridge is connected to a stable power source. Avoid frequent power interruptions.
- Network Stability: Maintain a stable WI-FI connection for the bridge to ensure continuous remote access to your locks.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bridge not powering on. | No power, faulty adapter, or outlet issue. | Check power connection, try a different outlet, ensure adapter is functioning. |
| Cannot connect to WI-FI. | Incorrect password, out of range, or network interference. | Verify WI-FI password, move bridge closer to router, reduce interference, restart router. |
| Cannot pair with Alfred Lock. | Lock not in pairing mode, bridge out of Bluetooth range, or interference. | Ensure lock is in pairing mode, move bridge closer to lock, restart both devices. |
| Remote control not working. | No internet connection, bridge offline, or app issue. | Check internet connection, verify bridge status in app, restart app, restart bridge. |
| Alexa integration not working. | Alfred skill not enabled, account not linked, or voice command issue. | Ensure Alfred skill is enabled and linked in Alexa app, use correct voice commands. |
Specifications
- Model Name: Alfred WB1 Connect WI-FI Bridge Home Automation Hub for DB1 & DB2 Series Locks
- Model Number: WB1
- Brand: Alfred
- Connectivity: Bluetooth, Wi-Fi
- Color: White
- Material: Plastic
- Dimensions (L x W x H): 2 x 2 x 1 inches
- Item Weight: 10.7 ounces
- Special Feature: Wi-Fi Hub
- Controller Type: Amazon Alexa, Vera
- UPC: 628341330121
Warranty Information
Specific warranty details for the Alfred WB1 Connect WI-FI Bridge are typically provided with the product packaging or available on the official Alfred website. Please refer to these resources for comprehensive warranty terms and conditions.
Customer Support
For technical assistance, troubleshooting, or further inquiries regarding your Alfred WB1 Connect WI-FI Bridge, please visit the official Alfred support website or contact their customer service department. Contact information can usually be found on the product packaging or the Alfred website.
