MAST TATTOO Mast Tour Pro Rotary Tattoo Pen Machine Instruction Manual

1. Introduction

The MAST TATTOO Mast Tour Pro is a rotary tattoo pen machine designed for professional tattoo artists. It features a custom coreless motor and a 3.6mm stroke length, making it suitable for various tattooing styles, including bold lines, black and grey work, and color packing. This manual provides essential information for the safe and effective use of your Mast Tour Pro machine.

2. Safety Information

• For professional use only: This device is intended for use by trained and certified tattoo artists.
• Sterilization: Always ensure all equipment, including cartridges and machine components that come into contact with skin, are properly sterilized before each use.
• Personal Protective Equipment (PPE): Wear appropriate PPE, such as gloves and protective eyewear, during tattooing procedures.
• Power Supply: Use only compatible and regulated power supplies. Ensure the power supply is stable and provides the correct voltage.
• Avoid moisture: Keep the machine dry and away from liquids to prevent electrical hazards.
• Disposal: Dispose of used needles and other contaminated materials according to local health regulations.

3. Setup

1. Attach a Cartridge: Select the appropriate tattoo cartridge and securely attach it to the machine. Ensure it clicks into place.
2. Connect to Power Supply: Connect the machine to a standard power supply or a wireless power battery using the RCA jack. The durable RCA jack ensures a stable connection.
3. Adjust Needle Depth: Rotate the grip to adjust the needle depth. The machine features a needles depth locator for precise adjustments.
4. Prepare Ink: Pour your desired tattoo ink into sterile caps.

Image: The Mast Tour Pro machine highlighting the needles depth locator for precise adjustment.

Image: The Mast Tour Pro machine with its durable RCA jack connected to a power source, showing a lighting effect.

4. Operating Instructions

1. Power On: Turn on your power supply and set the desired voltage. The Mast Tour Pro operates with a custom coreless motor, providing stable power output.
2. Test Machine: Before applying to skin, perform a quick test to ensure the needle is moving correctly and the machine is running smoothly.
3. Ink Application: Gently and smoothly transfer ink to the skin. The machine is designed for efficient cartridge change and replacement.
4. Grip and Control: The 32mm sleeve grip provides a low center of gravity and a reliable hold, enhancing control and comfort during tattooing.

Image: The Mast Tour Pro tattoo machine held in a gloved hand, ready for use, illustrating its ergonomic design.

Image: A close-up of the Mast Tour Pro tattoo machine with a needle cartridge, demonstrating its application during a tattoo session.

5. Maintenance

• Cleaning: After each use, thoroughly clean the machine body with a suitable disinfectant. Avoid submerging the machine in liquids.
• Lubrication: Periodically apply a small amount of machine oil to moving parts as recommended by the manufacturer to ensure smooth operation and longevity.
• Storage: Store the machine in a clean, dry, and safe place when not in use.
• Inspection: Regularly inspect the machine for any signs of wear or damage. Do not use if damaged.

6. Troubleshooting

• Machine not turning on: Check the power supply connection and ensure it is properly plugged in and turned on. Verify the RCA cable is securely connected to both the machine and the power supply.
• Inconsistent needle movement: Ensure the cartridge is correctly seated and not damaged. Check for any debris or dried ink obstructing the needle bar.
• Excessive vibration or noise: This may indicate a loose component or a need for lubrication. Disassemble carefully (if applicable) and inspect, or consult customer support.
• Overheating: If the machine becomes excessively hot, discontinue use immediately. Allow it to cool down and check the voltage settings. Prolonged high voltage can cause overheating.

7. Specifications

Image: The Mast Tour Pro tattoo machine with its weight (127g) and diameter (32mm) indicated, highlighting its compact and lightweight design.

Image: A disassembled view of the Mast Tour Pro machine, showcasing its custom coreless motor, which is crucial for its performance.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official MAST TATTOO website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.