FibroPool BoosterPump
FibroPool 1HP Universal Pool Cleaner Booster Pump
Model: BP100
Brand: FibroPool
Product Overview
The FibroPool BP100 Booster Pump is engineered to enhance your pool cleaning system by providing powerful and consistent water flow to pressure-side pool cleaners. This high-efficiency pump is designed for universal compatibility, making it an ideal replacement for most existing booster pumps. Its robust construction ensures durability, while its optimized design contributes to quiet operation and energy efficiency, promoting a cleaner and healthier pool environment.
Figure 1: FibroPool BP100 Booster Pump. This image shows the overall design of the pump, highlighting its compact and robust structure.
Important Safety Information
Always read and follow all instructions carefully before installing, operating, or servicing this product. Failure to do so can result in serious injury or death. This pump operates on 240 volts and should only be installed by a qualified professional or a knowledgeable individual following all local electrical codes.
- Disconnect power before servicing.
- Ensure proper grounding to prevent electrical shock.
- Do not run the pump dry.
- Keep children and pets away from the pump during operation.
- Protect the pump from direct exposure to rain and extreme weather conditions.
Setup and Installation
The FibroPool BP100 Booster Pump is designed for straightforward installation, compatible with most pressure-side pool cleaners. It includes standard fittings and a 5-foot power cable for convenience.
Pre-Installation Checklist:
- Verify power supply: The pump requires a 240V, 60Hz electrical supply.
- Ensure adequate space for installation and ventilation around the pump.
- Gather necessary tools: Wrenches, pipe sealant, wire strippers, screwdriver.
- Acquire any necessary PVC connectors. Note that 1" to 3/4" PVC connectors may be needed to fit standard booster pump connections, as mentioned by some users.
Installation Steps:
- Mounting the Pump: Securely mount the pump on a level, stable surface near your existing pool equipment. Ensure it is protected from direct weather exposure.
- Plumbing Connections: Connect the pump to your pool's plumbing system. The pump features standard fittings for easy integration. Apply pipe sealant to all threaded connections to prevent leaks.
- Electrical Wiring: The pump comes with a 5-foot power cable. For 240V hardwired installations, ensure proper wiring according to local electrical codes. The pump's electrical box contains terminals for connection. Refer to the wiring diagram on the pump's label for correct connections.
- Priming the Pump: Before initial startup, ensure the pump is fully primed by filling the pump housing with water. This prevents dry running and potential damage.
Figure 2: Product Label. This label provides critical electrical specifications and contact information for the FibroPool BP100 Booster Pump.
Figure 3: Electrical Wiring Terminals. This image shows the internal wiring connections of the pump, indicating where the power supply should be connected.
Operating Instructions
Once installed and primed, the FibroPool BP100 Booster Pump is ready for operation. It is designed for high-efficiency water flow and quiet performance.
- Initial Startup: After ensuring all connections are secure and the pump is primed, turn on the power supply to the pump.
- Monitoring Performance: Observe the pump's operation. It should run quietly and provide strong, consistent water flow to your pressure-side pool cleaner.
- Energy Efficiency: The BP100 is optimized for energy efficiency, reducing strain on your pool system while maintaining powerful suction.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your FibroPool BP100 Booster Pump.
- Routine Inspection: Periodically inspect the pump for any signs of wear, damage, or leaks. Pay close attention to seals and connections.
- Cleaning: Keep the pump exterior clean and free from debris. Ensure ventilation openings are not obstructed.
- Winterization: In colder climates, follow proper winterization procedures to protect the pump from freezing temperatures. This typically involves draining the pump and storing it in a frost-free environment.
Troubleshooting
This section provides solutions to common issues you might encounter with your FibroPool BP100 Booster Pump.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not starting | No power, tripped breaker, motor issue. | Check power supply and circuit breaker. Consult a qualified electrician if the issue persists. |
| Low water flow/pressure | Clogged impeller, air in the system, improper priming. | Check for obstructions in the impeller. Re-prime the pump. Inspect plumbing for air leaks. |
| Pump is leaking | Loose connections, worn seals, cracked housing. | Tighten all plumbing connections. Inspect and replace worn seals. If housing is cracked, contact support. |
| Excessive noise | Air in the system, cavitation, motor bearing wear. | Ensure pump is properly primed and free of air. Check for obstructions. If noise persists, professional inspection may be required. |
Specifications
Detailed technical specifications for the FibroPool BP100 Booster Pump.
| Feature | Specification |
|---|---|
| Brand | FibroPool |
| Model Number | BP100 (Item model number: BoosterPump) |
| Power Source | Corded Electric |
| Voltage | 240 Volts |
| Wattage | 1488 watts |
| Horsepower | 1 HP |
| Maximum Flow Rate | 25 Gallons Per Minute |
| Maximum Lifting Height | 200 Feet |
| Item Weight | 11.29 Kilograms (24.8 pounds) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Color | Black |
| UPC | 850013473113 |
Warranty and Support
FibroPool is committed to providing reliable equipment and customer satisfaction. While specific warranty details are not provided here, FibroPool products are crafted and tested for longevity and functionality.
For technical assistance, warranty claims, or any product-related inquiries, please contact FibroPool customer support:
- Phone: 1-877-FIBROPOOL
- Email: support@fibropool.com
- Website: www.fibropool.com
- Mailing Address: PO Box 2425, Bay Saint Louis, Ms 39521 USA
Figure 4: FibroPool Company Logo. This logo represents the brand's commitment to quality pool equipment.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.