1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Puig Hypernaked Aluminium Rearview Mirror, model 9884D. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Puig Hypernaked Rearview Mirror is designed for motorcycles, offering a sleek design and durable aluminium construction. This specific model is for the left side of the vehicle.
Figure 1: Puig Hypernaked Aluminium Rearview Mirror (Model 9884D)
This image shows the complete Puig Hypernaked Aluminium Rearview Mirror. It features a sleek, angular mirror head with a textured finish, connected to a straight arm, which then connects to a threaded base for mounting. The mirror is designed for the left side of a motorcycle.
2. Safety Information
Always prioritize safety during installation and operation. Failure to follow these instructions may result in injury or damage to the product or vehicle.
- Ensure the motorcycle is stable and turned off before beginning installation.
- Use appropriate tools and wear protective gear, such as gloves and eye protection.
- Do not overtighten fasteners, as this can strip threads or damage components.
- Verify that the mirror is securely mounted and provides adequate rear visibility before riding.
- Regularly check the mirror for looseness or damage.
3. Setup and Installation
3.1. Unpacking
Carefully remove all components from the packaging. Verify that all included components are present as per the instructions sheet provided with the product.
3.2. Tools Required
- Appropriate wrench or socket set for mirror mounting bolts.
- Torque wrench (recommended for precise tightening).
3.3. Installation Steps
- Prepare the Mounting Point: Locate the existing mirror mounting point on the left handlebar of your motorcycle. If an old mirror is present, carefully remove it.
- Attach the Mirror Base: Thread the base of the Puig Hypernaked Mirror into the mounting point. Ensure it is aligned correctly.
- Tighten Securely: Using the appropriate tool, tighten the mirror base. Refer to your motorcycle's service manual for specific torque specifications if available. Do not overtighten.
- Adjust Mirror Angle: Once the base is secure, adjust the mirror arm and head to achieve the desired viewing angle. The mirror operates manually, allowing for precise positioning.
- Final Check: Before riding, ensure the mirror is firmly attached and does not wobble. Confirm that you have a clear view of the rear.
4. Operating Instructions
The Puig Hypernaked Rearview Mirror is designed for manual operation and adjustment.
4.1. Adjusting the Mirror Angle
- While seated on your motorcycle in your normal riding position, gently grasp the edge of the mirror head.
- Carefully pivot the mirror head until you achieve an optimal view of the area behind your motorcycle.
- Ensure that the mirror provides a wide and clear field of vision, minimizing blind spots.
4.2. Post-Adjustment Check
After adjusting, lightly tap the mirror to ensure it remains in its set position and does not move freely. If it moves too easily, check the tightness of the mounting bolt.
5. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your Puig Rearview Mirror.
- Cleaning: Clean the mirror glass and aluminium body with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the finish.
- Inspection: Periodically inspect the mirror for any signs of damage, cracks, or loose components.
- Tightness Check: Regularly check the tightness of the mounting bolt to prevent the mirror from vibrating loose during operation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror vibrates excessively. | Loose mounting bolt. | Tighten the mounting bolt securely. |
| Mirror does not stay in position. | Mounting bolt not tight enough or internal mechanism issue. | Ensure mounting bolt is tightened. If issue persists, contact support. |
| Poor rear visibility. | Incorrect mirror angle. | Adjust the mirror angle as described in Section 4.1. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Puig |
| Model Number | 9884D |
| Product Name | Hypernaked Rearview Mirror |
| Material | Aluminium |
| Color | Aluminium |
| Auto Part Position | Left |
| Operation Mode | Manual |
| Dimensions (L x W x H) | 36 x 11.3 x 5.5 Centimeters |
| Item Weight | 450 g |
| Included Components | Components as per instructions sheet |
8. Warranty Information
Specific warranty details for Puig products may vary by region and retailer. Please refer to the warranty card included with your product or visit the official Puig website for detailed warranty terms and conditions.
Keep your proof of purchase for any warranty claims.
9. Customer Support
For technical assistance, spare parts, or any inquiries regarding your Puig Hypernaked Rearview Mirror, please contact Puig customer support through their official website or authorized distributors.
Website: www.puig.tv
When contacting support, please have your product model number (9884D) and purchase information ready.
