memzuoix 7-inch Disco Ball DJ Strobe Light User Manual

Introduction

Thank you for purchasing the memzuoix 7-inch Disco Ball DJ Strobe Light. This device is designed to create dynamic lighting effects for various indoor settings. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and user satisfaction.

Package Contents

Please verify that all items listed below are included in your package:

• 1 x memzuoix 7-inch Disco Ball DJ Strobe Light
• 1 x Remote Control
• 1 x Power Cable
• Mounting Screws and Wall Plugs (for optional installation)
• 1 x Warranty Card
• 1 x Button Cell Battery (extra, for remote control)

Figure 1: Package Contents. The image displays the disco ball light, its remote control, power cable, mounting hardware, and documentation.

Product Overview

The memzuoix Disco Ball DJ Strobe Light features a 7-inch spherical design with multiple facets to project vibrant light patterns. It is equipped with 6 LED colors and offers various lighting modes, including sound activation and strobe effects, all controllable via the included remote.

Figure 2: memzuoix 7-inch Disco Ball DJ Strobe Light. The product is shown with its remote control, projecting colorful light patterns.

Dimensions

Figure 3: Product Dimensions. The image illustrates the light's height and diameter.

Setup

1. Placement: The disco ball can be placed on a flat surface such as a table, desk, or floor.
2. Mounting (Optional): For elevated effects, the light can be fixed to a wall or ceiling using the provided mounting screws and wall plugs. Ensure the mounting surface is secure.
3. Power Connection: Connect the power cable to the disco ball light and then plug it into a standard 110V electrical outlet. The device is corded electric and does not operate via Bluetooth.

Operation

The disco ball light is controlled using the included remote control. Ensure the remote control battery is properly inserted.

Remote Control Functions

Figure 4: Remote Control Layout. This image details the various buttons and their functions.

• Power On/Off: Press the red power button to turn the light on or off.
• Pause and Restart: Use the STOP button to pause or restart the light effects.
• Music Control Modes (1, 2, 3): Activates sound-activated lighting. The light will respond to ambient sound.
• Flash Modes (1, 2, 3): Activates strobe light effects.
• Motor Rotation Speed (1, 2, 3): Adjusts the speed at which the light patterns rotate.
• Auto Mode: Cycles through various lighting effects automatically.
• Color/Effect Selection (1-8):
  • 1: Red & Yellow
  • 2: Green & Purple
  • 3: Blue & White
  • 4-7: Multicolor cycling, changing patterns.
  • 8: Changing cycle with strobe lights.

Lighting Effects and Modes

The device offers 6 distinct lighting effects, 3 voice-control modes, 3 strobe flash modes, and 3 rotation speeds. The brightness of the projected lights may vary depending on the ambient environment.

Figure 5: Disco Ball Light in Operation. The image shows the device creating vibrant light patterns.

Troubleshooting

• Light Not Turning On: Ensure the power cable is securely plugged into both the device and a working electrical outlet. If issues persist, try unplugging and reconnecting the power to reset the device.
• Sound Control Not Activating: In sound-control mode, the lights activate when ambient sound reaches approximately 45 dB. If the environment is too quiet, the lights may not respond. This is normal operation, not a defect.
• Motor Sound: A slight motor sound during operation is normal due to the internal rotation mechanism.
• Remote Control Issues: Ensure the remote control battery is functional. An extra button cell battery is included in the package for convenience.
• Testing Strobe Effects: If not in sound mode, press any "FLASH" key on the remote to test strobe effects.

Specifications

Maintenance

• Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the surface of the disco ball. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the device in a cool, dry place away from direct sunlight and moisture.
• Remote Battery: Replace the button cell battery in the remote control as needed. An extra battery is provided.

Warranty and Support

This product comes with a Warranty Card included in the package. Please refer to the card for specific warranty terms and conditions.

If you encounter any issues or require further assistance, please contact memzuoix customer support. Contact information can typically be found on the Warranty Card or the official memzuoix website.