1. Introduction
This manual provides detailed instructions for the proper use, installation, and maintenance of your Chicco KidFit Zip Plus 2-in-1 Belt-Positioning Booster Car Seat. Please read this manual thoroughly before using the product to ensure maximum safety and comfort for your child.
The Chicco KidFit Zip Plus is designed for children at least 4 years of age who can sit relatively still in the same seated position throughout the car ride, 38-57 inches tall and between 40-100 lbs. in high-back booster seat mode or 40-110 lbs. in backless booster seat mode.
2. Key Features
- DuoGuard Protection: Two layers of protection with a rigid shell and EPS energy-absorbing foam for head and body support.
- Adjustable Headrest: 10-position headrest adjusts easily for comfortable head and body support.
- Quick-Release LATCH: Premium LATCH connectors and a SuperCinch one-pull tightener stabilize the seat, with quick-release for easy removal.
- Zip-Off Cushions: Stylish quilted seat and backrest cushions that easily zip off for cleaning or storage.
- ErgoBoost Plus Seat: Contoured seat with triple-foam padding for enhanced comfort.
- 2-Position Backrest: Adjusts to mimic the vehicle seat position and is removable for backless booster mode.
- Dishwasher-Safe CupFolders: Two removable CupFolders that fold away when not in use.
- Bonus Storage Console: Fits into either CupFolder for storing small items.
3. Setup and Installation
Ensure your vehicle is parked on a level surface and the child is not in the seat during installation.
3.1 High-Back Booster Mode Installation
Position the Booster Seat: Place the KidFit Zip Plus booster seat on the vehicle seat where it will be used. Ensure the vehicle seat back is upright.
Image: The Chicco KidFit Zip Plus booster seat in its full high-back configuration, ready for installation.
Connect LATCH Anchors: Locate the LATCH connectors on the booster seat. Attach them to your vehicle's lower LATCH anchors. Listen for a click to confirm they are securely fastened.
Image: A hand demonstrating the SuperCinch one-pull tightener, which helps secure the booster seat firmly to the vehicle's LATCH system.
Tighten LATCH System: Pull the SuperCinch one-pull tightener strap to remove any slack and secure the booster seat firmly against the vehicle seat. The seat should not move more than 1 inch side-to-side or front-to-back at the belt path.
Adjust Headrest: Adjust the 10-position headrest to the appropriate height for your child. The shoulder belt guide should be just above your child's shoulders.
Image: A visual representation of the multi-position adjustable headrest, illustrating how it can be raised or lowered to accommodate a growing child.
3.2 Backless Booster Mode Conversion
The backrest is removable to create a backless booster for older children.
Remove Backrest: Detach the backrest from the booster base according to the instructions in your full product manual. This typically involves releasing clips or latches at the base of the backrest.
Image: The Chicco KidFit Zip Plus converted to its backless booster configuration, suitable for older children.
Install Backless Booster: Place the backless booster on the vehicle seat. Connect the LATCH anchors and tighten the SuperCinch strap as described for the high-back mode.
Image: An exploded view of the backless booster seat, highlighting the various layers of padding and structural components that contribute to comfort and safety.
4. Operating Instructions
4.1 Securing Your Child
Position Child: Have your child sit comfortably in the booster seat, ensuring their back is flat against the seat back.
Image: A child demonstrating proper seating in the booster seat, with the vehicle's shoulder belt correctly positioned across their chest and lap belt across their hips.
Route Seatbelt: Guide the vehicle's lap belt under the armrests and into the red belt guides on the booster seat. Ensure the lap belt lies low across your child's hips, touching the thighs.
Route Shoulder Belt: Guide the vehicle's shoulder belt through the red shoulder belt guide near the headrest. Ensure the shoulder belt lies flat across your child's chest and collarbone, not on the neck or face.
Buckle and Tighten: Buckle the vehicle seatbelt and pull the shoulder belt upwards to remove any slack. The seatbelt should be snug against your child's body.
4.2 Using CupFolders and Storage Console
Extend CupFolders: The two CupFolders can be extended from the sides of the booster seat for use. They can be folded back in when not needed for a narrower profile.
Image: A detailed view of one of the booster seat's CupFolders, highlighting its design and easy accessibility.
Insert Storage Console: The bonus storage console can be inserted into either CupFolder to hold small items like toys or snacks.
Image: A child interacting with the removable storage console, demonstrating its utility for holding small toys or other necessities during travel.
5. Maintenance
Regular cleaning and maintenance will prolong the life of your booster seat.
Fabric Care: All fabrics, including armrest covers and the stylish quilted seat and backrest cushions, are removable and machine washable. Zip off the cushions for easy cleaning.
Image: A hand demonstrating the zip-off feature of the booster seat's cushion, making it easy to remove for washing.
Plastic and Metal Parts: Wipe plastic and metal parts with a soft, damp cloth and mild soap. Do not use abrasive cleaners or solvents.
CupFolders: The CupFolders are dishwasher-safe for convenient cleaning.
Storage: When not in use, store the booster seat in a cool, dry place away from direct sunlight.
6. Troubleshooting
If you encounter any issues with your Chicco KidFit Zip Plus booster seat, please refer to the following common solutions:
- Seat Not Secure: Ensure the LATCH connectors are fully engaged and the SuperCinch strap is pulled tight. Wiggle the seat to confirm it does not move more than 1 inch.
- Seatbelt Fit Issues: Re-check the routing of the lap and shoulder belts. Ensure the shoulder belt is not on the child's neck and the lap belt is low on the hips. Adjust the headrest height if necessary.
- Difficulty Adjusting Headrest: Ensure no fabric or debris is obstructing the adjustment mechanism. Apply gentle, even pressure when adjusting.
- Cushions Not Zipping: Check for any fabric caught in the zipper. Ensure the zipper is aligned correctly.
For persistent issues or concerns not addressed here, please contact Chicco customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 17"D x 17"W x 26"H (43.2 x 43.2 x 66 cm) |
| Item Weight | 10 pounds (4.5 kg) |
| Model Number | 06079680390070 |
| Minimum Weight Recommendation | 40 Pounds (18.1 kg) |
| Maximum Weight Recommendation (High-Back) | 100 Pounds (45.4 kg) |
| Maximum Weight Recommendation (Backless) | 110 Pounds (49.9 kg) |
| Minimum Height Recommendation | 38 Inches (96.5 cm) |
| Maximum Height Recommendation | 57 Inches (144.8 cm) |
| Material Composition | 79.5% Plastic, 5.5% Metal, 15.0% Fabric & Fill |
| Care Instructions | Machine washable fabrics |
| Reclining Positions | 10 |
| Orientation | Forward Facing |
| Harness Type | 3-Point (vehicle belt) |
| Portability | Yes |
Image: A visual representation of the booster seat's dimensions, indicating its depth, width, and height for proper fit in vehicles.
8. Warranty and Support
For warranty information and customer support, please visit the official Chicco website or contact their customer service department. Keep your proof of purchase for any warranty claims.
Chicco Official Website: www.chicco.com
For additional assistance, refer to the contact information provided with your product packaging.
