Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your Cal Lighting HT-671-CH 8W dimmable Integrated LED Track Fixture. This fixture features an 8W integrated LED, providing 550 lumens of light with a 90 CRI at a 3000K color temperature. It is designed for track lighting systems and offers 355-degree rotation for adjustable illumination.
Please read these instructions thoroughly before installation and retain them for future reference.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Do not install this fixture on a track system that is not rated for its voltage (120 Volts).
- Ensure all connections are secure and properly insulated.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- Do not look directly into the LED light source when the fixture is powered on.
- Keep flammable materials away from the fixture.
Package Contents
Verify that all components are present before beginning installation.
- Cal Lighting HT-671-CH Integrated LED Track Fixture (1 unit)
- Instruction Manual (this document)
Note: Track rail and other track system components are sold separately and are not included with this fixture.
Setup and Installation
Installation of this track fixture requires basic electrical knowledge. If you are unsure about any part of the installation process, it is recommended to consult a qualified electrician.
Tools Required (Not Included):
- Screwdriver
- Wire strippers (if necessary for track system connection)
- Voltage tester
Installation Steps:
- Turn Off Power: Before starting any electrical work, ensure the power to the track lighting circuit is turned off at the circuit breaker or fuse box. Verify with a voltage tester.
- Prepare Track: Ensure your track lighting system is properly installed and powered off.
- Attach Fixture to Track:
- Align the track adapter on the fixture with the track slot.
- Insert the adapter into the track.
- Rotate the fixture 90 degrees to lock it into place. You should feel a click or resistance indicating it is secure.
- Tighten any locking screws or levers on the track adapter to firmly secure the fixture.
- Adjust Position: Once secured, the fixture can be slid along the track to the desired position.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: Cal Lighting HT-671-CH Integrated LED Track Fixture. This image shows the fixture with its track adapter and adjustable arm, ready for installation onto a track system.
Operating Instructions
The Cal Lighting HT-671-CH fixture is designed for straightforward operation within a compatible track lighting system.
- Power On/Off: Control the fixture's power using the wall switch connected to your track lighting circuit.
- Dimmable Functionality: This fixture is dimmable. For optimal performance, use with compatible Lutron brand dimmers such as DVCL-153P, SCL-153P, AYCL-153P, CTCL-153P, DVCL-253P, or DVSCLL-253P. Ensure your dimmer is rated for LED loads.
- Adjusting Light Direction: The fixture features 355-degree rotation. Gently pivot the light head to direct illumination as desired. Avoid excessive force when adjusting.
Maintenance
Regular maintenance will help ensure the longevity and optimal performance of your track fixture.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
- LED Replacement: The LED in this fixture is integrated and not user-replaceable. If the LED fails, the entire fixture may need to be replaced.
- Inspection: Periodically inspect the fixture and track connections for any signs of damage or loose wiring. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
If you experience issues with your track fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. |
|
|
| Light flickers or dims unexpectedly. |
|
|
| Fixture is hot to the touch. |
|
|
If the problem persists after attempting these solutions, please contact customer support.
Specifications
| Model Number | HT-671-CH |
| Brand | Cal Lighting |
| Light Source Type | Integrated LED |
| Wattage | 8 Watts |
| Lumen Output | 550 Lumens |
| Color Temperature | 3000K |
| Color Rendering Index (CRI) | 90 |
| Voltage | 120 Volts |
| Dimmable | Yes (with compatible LED dimmers) |
| Rotation | 355 Degrees |
| Material | Metal, Glass |
| Finish | Chrome |
| Product Dimensions | 2.25"L x 4.75"W x 3.9"H |
| Item Weight | 1.4 pounds |
| Assembly Required | Yes |
Warranty
This Cal Lighting product is covered by a manufacturer's warranty for one year from the purchased date. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification.
Please retain your proof of purchase for warranty claims.
Support
For technical assistance, warranty inquiries, or if you have any questions regarding the installation or operation of your Cal Lighting HT-671-CH fixture, please contact Cal Lighting customer support. Refer to the product packaging or the official Cal Lighting website for current contact information.
When contacting support, please have your model number (HT-671-CH) and proof of purchase readily available.
