iHome iBT234 Wireless Bluetooth Stereo Speaker Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your iHome iBT234 Wireless Bluetooth Stereo Speaker. Please read this guide thoroughly to ensure proper use and to maximize your product's features.

Package Contents

Verify that all items listed below are included in your package:

iBT234 Speaker Unit
Power Adapter
USB Charging Cable
User Manual

Controls and Indicators

Familiarize yourself with the buttons and display on your iBT234 speaker.

Figure 1: Front view of the iHome iBT234 speaker showing the digital clock display.

Top Panel Controls:

Top-down view of the iHome iBT234 speaker's control panel, showing all buttons and their functions.

Figure 2: Top-down view of the iHome iBT234 speaker's control panel.

Power Button: Turns the unit on/off.
Volume Down (-): Decreases volume.
Bluetooth Button: Initiates Bluetooth pairing mode.
Volume Up (+): Increases volume.
Alarm 1 Button: Sets or activates/deactivates Alarm 1.
Alarm 2 Button: Sets or activates/deactivates Alarm 2.
Play/Pause Button: Plays or pauses audio in Bluetooth mode.
Previous Track Button: Skips to the previous track in Bluetooth mode or tunes down FM frequency.
Next Track Button: Skips to the next track in Bluetooth mode or tunes up FM frequency.
Sleep Button (Moon icon): Activates sleep timer.
Snooze/Dimmer Button (ZZZ): Snoozes active alarm or adjusts display brightness.

Rear Panel Connections:

Rear view of the iHome iBT234 speaker, illustrating the power input, USB charging port, and a smartphone connected for charging.

Figure 3: Rear view of the iHome iBT234 speaker with connections.

DC-IN Jack: Connects to the included power adapter.
USB Charging Port: For charging external devices (e.g., smartphones).
Time Set Button: Used to manually set the time.
DST Switch: Daylight Saving Time switch.

Setup

1. Power Connection

Connect the included power adapter to the DC-IN jack on the rear of the iBT234.
Plug the adapter into a standard wall outlet. The unit will power on automatically.

2. Setting the Time

Press and hold the Time Set Button on the rear of the unit until the time display flashes.
Use the Previous Track or Next Track buttons on the top panel to adjust the hour. Press the Time Set Button again to confirm the hour.
Use the Previous Track or Next Track buttons to adjust the minutes. Press the Time Set Button again to confirm the minutes.
Continue to set the year, month, and date using the same method.
Press the Time Set Button one last time to exit time setting mode.

3. Setting Alarms

The iBT234 features two independent alarms (Alarm 1 and Alarm 2).

Press and hold either the Alarm 1 Button or Alarm 2 Button until the alarm time display flashes.
Use the Previous Track or Next Track buttons to adjust the alarm hour. Press the respective Alarm Button to confirm.
Use the Previous Track or Next Track buttons to adjust the alarm minutes. Press the respective Alarm Button to confirm.
Select the alarm source (Bluetooth, FM Radio, or built-in tone) using the Previous Track or Next Track buttons. Press the respective Alarm Button to confirm.
Adjust the alarm volume using the Volume Down (-) or Volume Up (+) buttons. Press the respective Alarm Button to confirm.
Select the alarm schedule (Every Day, Weekdays, or Weekends) using the Previous Track or Next Track buttons. Press the respective Alarm Button to confirm and exit alarm setting mode.

To activate or deactivate an alarm, press the corresponding Alarm Button briefly. An alarm icon will appear on the display when active.

Operating Instructions

1. Bluetooth Pairing

Press the Power Button to turn on the unit.
Press and hold the Bluetooth Button until the Bluetooth icon flashes on the display. The unit is now in pairing mode.
On your Bluetooth-enabled device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
Select "iHome iBT234" from the list of devices.
Once paired, the Bluetooth icon on the speaker's display will glow solid, and a confirmation tone will sound.
You can now play audio from your device through the iBT234 speaker.

2. FM Radio Operation

Press the Power Button to turn on the unit.
Press the Bluetooth Button repeatedly to cycle through modes until "FM" appears on the display.
Use the Previous Track or Next Track buttons to manually tune to a desired FM station. Press and hold these buttons for auto-scan.
To save an FM preset, press and hold one of the numbered preset buttons (1-4) on the top panel until the display flashes. Press the same preset button again to confirm.
To recall a preset station, briefly press the corresponding numbered preset button.

3. Speakerphone Function

When your phone is paired via Bluetooth and a call comes in:

Press the Play/Pause Button to answer an incoming call.
Press the Play/Pause Button again to end the call.

4. Sleep Mode

The sleep mode allows you to fall asleep to audio, which will automatically turn off after a set duration.

While audio is playing, press the Sleep Button (Moon icon).
Repeatedly press the Sleep Button to cycle through available sleep timer durations (e.g., 120, 90, 60, 30, 15 minutes, or OFF).
The audio will play for the selected duration and then automatically turn off.

5. Display Dimmer

To adjust the brightness of the display:

Press the Snooze/Dimmer Button (ZZZ) repeatedly to cycle through different brightness levels (High, Medium, Low, Off).

Maintenance

Cleaning the Unit

Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or abrasive materials. Ensure the unit is unplugged before cleaning.

Battery Backup

The unit may contain an internal backup battery to maintain time settings during power outages. If the time is incorrect after a power loss, refer to the "Setting the Time" section.

Troubleshooting

Problem	Possible Cause	Solution
Unit does not power on.	Power adapter not connected or faulty outlet.	Ensure power adapter is securely connected and plugged into a working outlet.
No sound from speaker.	Volume too low, incorrect mode, or device not paired.	Increase volume on both the speaker and your connected device. Ensure correct mode (Bluetooth/FM) is selected. Re-pair Bluetooth device if necessary.
Bluetooth device not pairing.	Speaker not in pairing mode, device too far, or previously paired.	Ensure speaker is in pairing mode (flashing Bluetooth icon). Move device closer. Forget "iHome iBT234" on your device and try pairing again.
Alarm does not sound.	Alarm not activated, volume too low, or incorrect time set.	Verify alarm icon is visible on display. Check alarm volume. Confirm alarm time is correctly set.

Specifications

Brand: iHome
Model Number: iBT234B
Connectivity Technology: Bluetooth, USB
Audio Output Mode: Stereo
Speaker Type: Bluetooth
Speaker Maximum Output Power: 10 Watts
Bluetooth Range: 10 Meters
Power Source: Corded Electric
Total USB 2.0 Ports: 1 (for charging external devices)
Additional Features: Speakerphone, Dual Alarms, FM Radio, Display Dimmer, Sleep Timer

Warranty and Support

This product comes with an Extended Warranty. For detailed warranty information, product registration, or technical support, please visit the official iHome website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.

Online Support: www.ihomeaudio.com/support/

	iHome iKN95 Dual Charging Stereo Alarm Clock with Speakerphone - User Manual This user manual provides comprehensive instructions for the iHome iKN95 dual charging stereo alarm clock. Learn how to set up, charge, use Bluetooth and NFC, operate the FM radio, set alarms, and troubleshoot common issues.
	iHome iBT233 Bluetooth Dual Alarm Stereo Clock Radio with Dual USB Charging - User Manual Comprehensive user manual for the iHome iBT233 Bluetooth Dual Alarm Stereo Clock Radio. Learn how to set up, use features like Bluetooth, alarms, FM radio, USB charging, and find troubleshooting tips and warranty information.
	iHome iBT29 Dual Alarm Clock Radio with Bluetooth - Quick Start Guide Quick start guide for the iHome iBT29 Dual Alarm Clock Radio, featuring Bluetooth connectivity, USB charging, FM radio, and dual alarms. Learn how to set up, connect, and use its features.
	iHome K4 Dual Charging Alarm Clock with Speakerphone - User Manual Comprehensive user manual for the iHome K4 dual charging alarm clock, featuring Bluetooth speakerphone, removable K-Cell battery, and alarm functions. Includes setup, operation, maintenance, safety, and troubleshooting guides.
	iHome iBT297v2 Bluetooth Color Changing Dual Alarm Clock Radio User Manual Comprehensive user manual for the iHome iBT297v2 Bluetooth Color Changing Dual Alarm Clock Radio, covering setup, features like Bluetooth audio, speakerphone, voice control, FM radio, alarm settings, color modes, and troubleshooting.
	iHome iBTW38 Dual Alarm Clock Stereo Speaker System with Qi Wireless Charging User Manual Detailed user manual for the iHome iBTW38 Dual Alarm Clock Stereo Speaker System, covering setup, features like Bluetooth audio, Qi wireless charging, alarm functions, and troubleshooting.

iHome iBT234B