Introduction
This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your KUPPET Stand Mixer, Model 1. Please read this manual thoroughly before first use and retain it for future reference.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions before operating the mixer.
- To protect against risk of electrical shock, do not immerse the mixer base in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
- Avoid contact with moving parts. Keep hands, hair, and clothing, as well as spatulas and other utensils, away from beaters during operation to prevent injury and/or damage to the mixer.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been dropped or damaged in any manner.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter.
- Do not let cord contact hot surfaces, including the stove.
- Always operate the mixer with the splash guard in place when mixing to prevent splashing.
- Ensure the mixer is switched off and unplugged before changing attachments.
Product Components
Familiarize yourself with the parts of your KUPPET Stand Mixer.
Image: Overview of the KUPPET Stand Mixer and its main components, including the output shaft, wire whip, splash shield, 4.7 QT mixing bowl, tilt lock, 8-speed control, dough hook, flat beater, egg separator, and anti-slip feet.
- Mixer Head: Contains the motor and attachment port. Features a tilt-head design for easy access.
- 4.7 Quart Stainless Steel Mixing Bowl: Large capacity bowl for various recipes.
- Dough Hook: Used for mixing and kneading yeast doughs like bread and pizza dough.
- Wire Whip: Ideal for incorporating air into ingredients, such as whipping eggs, cream, and light batters.
- Flat Beater: Suitable for medium to heavy mixtures, including cakes, cookies, frostings, and mashed potatoes.
- Splash Guard: Helps prevent ingredients from splashing out of the bowl during mixing.
- 8-Speed Control Dial: Allows precise adjustment of mixing speed.
- Tilt Lock: Secures the mixer head in place during operation.
- Anti-Slip Feet: Suction cups on the base provide stability during operation.
Setup and Assembly
- Placement: Place the mixer on a dry, flat, and stable surface. Ensure the anti-slip feet are securely gripping the countertop.
- Tilt the Head: Press the tilt-head release button (usually located on the side or back of the mixer head) and lift the mixer head until it locks into the tilted position.
- Attach the Bowl: Place the 4.7QT stainless steel mixing bowl onto the base, aligning the grooves, and twist clockwise until it locks securely in place.
- Insert Attachment: Select the desired attachment (dough hook, wire whip, or flat beater). Push the attachment upwards onto the output shaft and turn it counter-clockwise until it locks into the pin.
- Lower the Head: Press the tilt-head release button again and gently lower the mixer head until it locks into the operating position.
- Attach Splash Guard (Optional): If using, slide the splash guard onto the mixer head, ensuring it covers the bowl opening.
Image: The KUPPET Stand Mixer in its assembled state, showcasing the tilt-head design and the 4.7QT stainless steel bowl with a wire whip attachment. The tilt-head allows for easy attachment and removal of accessories.
Operating Instructions
Follow these steps for safe and effective operation of your stand mixer.
- Add Ingredients: Place your ingredients into the mixing bowl.
- Plug In: Ensure the speed control dial is set to "P" (Park/Off) before plugging the mixer into a standard electrical outlet.
- Select Speed: Turn the speed control dial to the desired speed setting (1-8). Start with a lower speed and gradually increase as needed to prevent splashing.
- Mixing: Allow the mixer to operate until ingredients are thoroughly combined or the desired consistency is achieved.
- Stop Operation: Turn the speed control dial back to "P" to stop the mixer.
- Unplug: Always unplug the mixer from the outlet after use and before removing the bowl or attachments.
Recommended Speed Settings:
| Speed Setting | Attachment | Application |
|---|---|---|
| 1-2 (Low) | Dough Hook, Flat Beater | Mixing heavy batters, mashing potatoes, starting dough, combining dry ingredients. |
| 3-4 (Medium-Low) | Flat Beater | Mixing cakes, cookies, frostings, creaming butter and sugar. |
| 5-6 (Medium-High) | Wire Whip, Flat Beater | Whipping egg whites, cream, light batters, mixing thin batters. |
| 7-8 (High) | Wire Whip | Rapid whipping of small quantities of egg whites or cream. |
Image: Demonstrates the versatility of the KUPPET Stand Mixer with its attachments. The 6-wire whip is shown with desserts and cupcakes, the dough hook with bread and pizza, and the flat beater with salads and mashed potatoes.
Maintenance and Cleaning
Proper cleaning and maintenance will extend the life of your mixer.
- Always Unplug: Before cleaning, ensure the mixer is unplugged from the power outlet.
- Attachments:
- The stainless steel bowl, wire whip, and flat beater are dishwasher safe.
- Do not put the dough hook into the dishwasher. Hand wash the dough hook with warm, soapy water and dry thoroughly.
- Mixer Body: Wipe the mixer body with a damp cloth. Do not use abrasive cleaners or immerse the mixer body in water.
- Splash Guard: Hand wash or place in the top rack of the dishwasher.
- Storage: Store the mixer and its attachments in a clean, dry place.
Troubleshooting
If you encounter any issues, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Mixer does not start. | Not plugged in; power outlet not working; speed dial not set to a speed. | Ensure the mixer is securely plugged in. Check the power outlet with another appliance. Turn the speed dial to a setting between 1 and 8. |
| Mixer head not locking down. | Head not fully lowered or locked. | Press the tilt-head release button and gently push the head down until it clicks into the locked position. |
| Attachments not fitting or falling off. | Attachment not properly installed. | Ensure the attachment is pushed up onto the shaft and twisted counter-clockwise until it locks onto the pin. |
| Excessive vibration or noise. | Unstable surface; bowl or attachment not secured; too much load. | Ensure the mixer is on a stable, flat surface. Check that the bowl and attachment are securely locked. Reduce the amount of ingredients if overloaded. |
Specifications
- Model: 1
- Brand: KUPPET
- Capacity: 4.7 Quarts (approximately 4.45 Liters)
- Power/Wattage: 380 Watts
- Number of Speeds: 8
- Material: Stainless Steel (Bowl), Mixer Body (Plastic/Metal)
- Color: Macaron Green
- Item Weight: 3.74 kg (7.06 lbs)
- Dimensions (Approximate): 35.5 cm (L) x 22.4 cm (W) x 28.7 cm (H) / 13.98" (L) x 8.82" (W) x 11.30" (H)
- Special Features: Tilt-Head Design, Anti-Slip Feet, Dishwasher Safe Bowl/Whip/Beater (Dough Hook Hand Wash Only)
Image: Diagram illustrating the dimensions of the KUPPET Stand Mixer, showing its height, width, and depth, along with its weight, power, and bowl capacity.
Warranty and Support
Your KUPPET Stand Mixer is covered by a worry-free 12-month warranty.
For any questions, concerns, or support needs regarding your product, please contact KUPPET customer service. Refer to your purchase documentation for specific contact details or visit the official KUPPET website.
The KUPPET electric mixer is ETL listed, ensuring it meets recognized safety standards.
