Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Beast Kingdom Avengers Endgame: Thor EAA-103 Egg Attack Action Figure. Please read this manual thoroughly before handling the product to ensure proper use and longevity.
Figure of Thor from Avengers: Endgame, holding Stormbreaker. This image displays the overall appearance of the action figure.
What's in the Box
Carefully unpack all components and verify that all items listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1x Thor EAA-103 Egg Attack Action Figure
- Interchangeable face parts (including light-up eyes)
- 3 sets of interchangeable hands
- 1x Stormbreaker axe
- 1x Mjolnir hammer
- Special effect parts for weapons and armor
An exploded view showing the Thor figure along with its various accessories, including interchangeable hands, weapons (Stormbreaker and Mjolnir), and effect parts.
Setup
- Unpacking: Carefully remove the figure and all accessories from the packaging. Retain the packaging for future storage or transport.
- Base Assembly (if applicable): If a display base is included, ensure it is securely assembled according to any separate instructions provided with the base.
- Attaching Hands: Select the desired pair of interchangeable hands. Gently align the peg on the hand with the hole in the figure's wrist and push firmly until it clicks into place. Avoid excessive force.
- Attaching Weapons: Insert the handle of Stormbreaker or Mjolnir into the grip of the selected hand. Ensure a snug fit.
- Interchanging Face Parts: To change the figure's expression or activate light-up eyes, gently remove the current face part by pulling it away from the head. Align the new face part and press it into place.
The Thor figure standing in a neutral pose, demonstrating its articulation and readiness for display after initial setup.
Operating Instructions
The Thor EAA-103 figure features multiple points of articulation and special functions for dynamic posing and display.
- Articulation: The figure has 20 points of articulation. Gently move the joints (shoulders, elbows, wrists, hips, knees, ankles, neck) to achieve desired poses. Do not force joints beyond their natural range of motion.
- Light-Up Eyes: The figure includes light-up eyes. To activate this feature, ensure the correct face part is attached. (Note: Battery requirements and activation switch location are typically detailed in a separate quick-start guide or on the packaging. Please refer to those for specific instructions on battery installation and activation.)
- Special Effect Parts: Attach the blue lightning effect parts to Stormbreaker, Mjolnir, or around the figure's body as desired to simulate Thor's powers. These parts are designed to fit snugly onto designated areas.
The Thor figure showcasing its light-up eye feature and the blue lightning effect parts attached to Stormbreaker and Mjolnir, illustrating its powered-up appearance.
Maintenance
Proper care will help preserve the condition and appearance of your action figure.
- Cleaning: Use a soft, dry cloth to gently wipe dust from the figure. For stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or abrasive materials.
- Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation. Keep it in a cool, dry place.
- Handling: Always handle the figure by its main body. Avoid pulling on small parts or accessories with excessive force, as this may cause breakage.
- Joint Care: If joints become stiff, gently warm them with a hairdryer on a low setting for a few seconds to loosen them. If joints are too loose, a small amount of clear nail polish or a specialized joint tightener can be applied to the peg and allowed to dry.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Joints are stiff or difficult to move. | Figure is cold; paint may be stuck in joints. | Gently warm the joint with a hairdryer on a low setting. Carefully work the joint back and forth. |
| Light-up eyes do not work. | Batteries are dead or incorrectly installed; activation switch is off. | Check battery orientation and replace batteries if necessary. Ensure the activation switch (if present) is in the "ON" position. |
| Accessories do not fit or fall off easily. | Incorrect accessory for the peg/hole; peg/hole is too loose. | Ensure you are using the correct accessory. For loose connections, apply a thin layer of clear nail polish to the peg and let it dry completely before reattaching. |
Specifications
- Product Name: Beast Kingdom Avengers Endgame: Thor EAA-103 Egg Attack Action Figure
- Model Number: EAA-103
- Brand: Beast Kingdom
- Dimensions: 2.5 x 2.5 x 6.5 inches (L x W x H)
- Item Weight: 1.3 pounds
- Articulation: 20 points of articulation
- Features: Movable eyes, light-up eyes, interchangeable hands, Stormbreaker, Mjolnir, special effect parts.
- Recommended Age: 15 years and up
- Manufacturer: Beast Kingdom
Warranty and Support
Beast Kingdom products are manufactured with high standards of quality. For information regarding warranty coverage, returns, or technical support, please refer to the official Beast Kingdom website or contact their customer service directly.
Official Website: www.beast-kingdom.com
For further assistance, please contact your retailer or the manufacturer's customer support line.