ChiliTec Milos 4-Gang Frame for Sockets and Switches - Anthracite

1. Introduction

This instruction manual provides essential information for the installation and use of your ChiliTec Milos 4-Gang Frame. Designed for versatility, this anthracite-colored frame accommodates various electrical components, offering a clean and modern finish to any room.

The Milos series components are engineered for both horizontal and vertical mounting, making them suitable for diverse applications in residential and commercial settings.

2. Safety Instructions

• Always disconnect power at the main circuit breaker before performing any electrical installation or maintenance.
• Installation should only be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations.
• This frame is designed for flush-mounted installations.
• The frame includes an integrated shutter for enhanced safety.
• This product is not suitable for IP44 rated sockets and switches, or for use in environments requiring higher ingress protection (e.g., direct water exposure).
• Do not modify the product in any way. Unauthorized modifications may lead to hazards and void the warranty.

3. Package Contents

• 1 x ChiliTec Milos 4-Gang Frame (Anthracite)

4. Setup and Installation

The Milos 4-Gang Frame is designed for quick and clean assembly, ideal for both individual and large-scale installations. It is compatible with various Milos series components with standard 55 x 55 mm internal dimensions.

4.1. Compatible Components

This frame is designed to house a variety of flush-mounted electrical components from the Milos series, including:

• Standard socket outlets with protective contact
• Single and bipolar switches
• 160° motion detectors (230 V, 400 W, LED compatible)
• Cat6 network sockets
• 3-way TV, radio, and satellite antenna sockets
• Blind control switches (230 V)
• Push buttons (250 V ~ / 10 A)
• Dimmers (250 V ~ / 3 to 60 W, for LED lamps)
• Changeover switches (250 V ~ / 10 A)
• Protective contact sockets with 2 USB ports (250 V ~ / 16 A, 3.1 A USB)
• Push buttons with nameplate

Note: Ensure all components selected are compatible with the 55 x 55 mm internal dimensions of the frame.

4.2. Mounting Orientation

The frame supports both horizontal and vertical installation, allowing flexibility in design and placement.

Figure 1: ChiliTec Milos 4-Gang Frame installed horizontally. This image shows the frame designed to hold four electrical components side-by-side.

Figure 2: ChiliTec Milos 4-Gang Frame installed vertically. This image illustrates the frame configured to hold four electrical components stacked one above the other.

4.3. Installation Steps

1. Prepare the Mounting Box: Ensure the flush-mounted box in the wall is correctly installed and wired according to electrical standards.
2. Mount Components: Insert the desired Milos series electrical components (sockets, switches, etc.) into the frame openings. The frame is designed for screw-mounted installation of these components.
3. Secure the Frame: Position the assembled frame with components over the flush-mounted box. Secure the frame to the wall using appropriate screws (not included, as the product is delivered without screw fastening for quick assembly).
4. Attach Cover Plates: Once the frame is securely mounted, attach the corresponding cover plates for your electrical components.
5. Restore Power: After verifying all connections and ensuring the installation is complete and safe, restore power at the main circuit breaker.

5. Operating (Usage)

The ChiliTec Milos 4-Gang Frame serves as a housing for your electrical components. Once installed, the operation of your sockets, switches, and other devices will function as designed by their respective manufacturers. The frame itself does not have operational functions but provides a secure and aesthetically pleasing mounting solution.

This frame is suitable for use in various indoor environments, including living rooms, bedrooms, children's rooms, offices, kitchens, bathrooms (excluding areas requiring IP44 or higher protection), and hallways.

6. Maintenance

To maintain the appearance of your ChiliTec Milos 4-Gang Frame, simply wipe it with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the anthracite finish. Ensure power is off before cleaning any electrical components.

7. Troubleshooting

• Component does not fit: Verify that the internal dimensions of your electrical component are 55 x 55 mm. This frame is designed for standard Milos series components.
• Frame not flush with wall: Ensure the flush-mounted box in the wall is properly installed and that no wires are obstructing the frame's seating. Check for any debris behind the frame.
• Damage to frame: If the frame is damaged during installation or use, it should be replaced to ensure safety and proper function.
• Electrical issues: If you experience any electrical issues (e.g., power not working, flickering), consult a qualified electrician immediately. The frame itself is a passive component and does not cause electrical faults.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please contact your retailer or the manufacturer, ChiliTec GmbH. Information regarding spare parts availability is not provided by the manufacturer for this product.

Manufacturer: ChiliTec GmbH