GIANDEL Pure Sine Wave Power Inverter 2200W (Model PS-2200KAR)

1. Introduction

This manual provides essential information for the safe and efficient operation of your GIANDEL Pure Sine Wave Power Inverter 2200W. This device converts 12V DC battery power into 120V AC household power, suitable for various applications including RVs, trucks, boats, off-grid systems, solar setups, and emergency power needs. The inverter delivers a continuous 2200 watts of pure sine wave power, ensuring compatibility with sensitive electronics. It is ETL listed and complies with UL458 standards for safety.

Key features include:

• 2200 Watt Continuous Pure Sine Wave Output
• DC 12V to AC 120V Conversion
• Two AC Outlets and one 2.4A USB Port
• ETL Listed with UL458 Standard Compliance
• 15ft Wired Remote Control
• LED Display for Monitoring
• Integrated Protection Features

Image 1.1: The GIANDEL 2200W Pure Sine Wave Power Inverter, showcasing its main unit, remote control, battery cables, and hardwire blocks.

2. Safety Information

Read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Power Rating: Do not connect appliances that draw more than 2200 watts to this inverter. Overloading can damage the inverter and the connected device.
• Battery Connection: Always connect the inverter to a 12V battery using the provided standard cables. Ensure correct polarity (red to positive, black to negative).
• Wiring Safety: Disconnect the positive battery terminal before performing any wiring or maintenance on the inverter.
• Vehicle Operation: Do not leave the power inverter in the ON position when your vehicle's engine is off, as this can drain the battery.
• Environmental Conditions: Install the inverter in a cool, dry, and well-ventilated environment. Avoid direct sunlight, moisture, and flammable materials.
• Ventilation: Ensure adequate airflow around the inverter to prevent overheating. Do not block ventilation openings.
• Qualified Personnel: Installation and servicing should only be performed by qualified personnel.
• ETL/UL458 Compliance: This inverter is ETL listed and complies with UL458 standards, indicating it meets specific safety requirements.

Image 2.1: ETL certification details, confirming compliance with UL458 and CSA C22.2 North America Standards for power conversion equipment.

3. Product Overview and Components

The GIANDEL 2200W Pure Sine Wave Power Inverter is designed for robust performance and ease of use. It features a durable aluminum alloy housing for efficient heat dissipation.

3.1 Package Contents

• 1x GIANDEL 2200 Watt Pure Sine Wave Power Inverter
• 2x Battery Cables (red and black, 2 feet length, 35mm² / >2 AWG)
• 1x Remote Controller (with 15ft cable)
• 1x User Manual

3.2 Inverter Features

The inverter's front and rear panels provide all necessary connections and controls:

• Front Panel: Two US AC outlets, one 0-2.4A USB port, LED display, Inverter switch, Earth wire terminal, Remote controller port.
• Rear Panel: Positive (+) and Negative (-) DC input terminals, Intelligent Cooling Fans.

Image 3.1: Detailed view of the inverter's front panel, showing AC outlets, USB port, LED display, and control switch. The rear panel shows the DC input terminals and cooling fans.

Image 3.2: An internal view highlighting the input/output isolation design and the intelligent cooling fans, which operate silently (less than 45dB) and activate when temperature exceeds 104°F or load is above 880 watts.

4. Setup and Installation

Proper installation is crucial for the inverter's performance and safety.

4.1 Choosing a Location

• Select a cool, dry, and well-ventilated area.
• Avoid direct sunlight, heat sources, and moisture.
• Ensure sufficient space around the inverter for airflow.
• Mount the inverter securely on a stable surface.

4.2 Battery Connection

1. Ensure the inverter's power switch is in the OFF position.
2. Disconnect the positive terminal of your 12V battery before making any connections to the inverter.
3. Connect the red battery cable to the positive (+) terminal of the inverter and then to the positive (+) terminal of the 12V battery.
4. Connect the black battery cable to the negative (-) terminal of the inverter and then to the negative (-) terminal of the 12V battery.
5. Tighten all connections securely to prevent loose contacts, which can cause overheating.
6. For optimal performance and longevity, a battery capacity of 200 AH or above is recommended for this 2200W inverter.

4.3 Hardwire Blocks Connection

The 20 Amps hardwire terminal blocks allow for direct connection of heavy-duty appliances, ensuring stable power delivery for loads up to 2200 watts.

1. Ensure the inverter is OFF and disconnected from the battery.
2. Connect your AC appliance wiring to the designated hardwire terminal blocks on the inverter.
3. Ensure all connections are secure and properly insulated.

4.4 Remote Control Connection

The wired remote control allows for convenient operation of the inverter from a distance.

1. Plug the 15ft cable of the remote controller into the RJ10 port on the front panel of the inverter.
2. The remote can then be used to turn the inverter ON/OFF.

Image 4.1: Illustration of the inverter's dimensions (15.9 x 9.1 x 3.7 inches), the 15-foot wired remote controller with RJ10 connector, and the 2-foot pure copper battery cables (35mm²).

5. Operating Instructions

Follow these steps to operate your GIANDEL Pure Sine Wave Power Inverter.

5.1 Powering On and Off

1. After all connections are secure, reconnect the positive battery terminal.
2. Press the power button on the inverter's front panel or on the remote control to turn the inverter ON. The LED display will illuminate.
3. To turn OFF, press the power button again.

5.2 LED Display

The LED display provides real-time information about the inverter's status:

• Input Voltage: Shows the current DC voltage from the battery.
• Output Power: Displays the current AC power being drawn by connected appliances.
• Protection Modes: Indicates various protection statuses (e.g., low voltage, overload, overheat).

5.3 Connecting AC Appliances and USB Devices

1. Plug your AC devices into the two standard AC outlets on the inverter's front panel.
2. For USB-powered devices, connect them to the 2.4A USB port.
3. Ensure the total wattage of all connected AC appliances does not exceed 2200 watts.

5.4 Intelligent Cooling Fan Operation

The inverter features an intelligent cooling fan system designed to maintain optimal operating temperature and reduce noise.

• The fans will automatically activate when the internal temperature reaches approximately 104°F (40°C).
• The fans will also activate when the load power exceeds 40% of the rated power (approximately 880 watts).
• This ensures efficient cooling only when needed, contributing to quieter operation under light loads.

Image 5.1: The inverter's LED display showing input voltage, output power, and various protection mode indicators (LO, OH, HI, OL). The remote control is also shown.

Image 5.2: Examples of the inverter's use in different settings, including powering tools, on a yacht, for outdoor cooking, and in a recreational vehicle, demonstrating its versatility.

6. Maintenance

Regular maintenance helps ensure the longevity and reliable operation of your inverter.

• Cleaning: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners.
• Connection Checks: Regularly inspect all electrical connections (battery cables, hardwire blocks, remote cable) for tightness and corrosion. Loose connections can lead to power loss or overheating.
• Battery Health: Monitor your 12V battery's health. Ensure it is adequately charged and maintained, especially if the inverter is used frequently or for extended periods.
• Storage: If storing the inverter for an extended period, disconnect it from the battery and store it in a cool, dry place.

7. Troubleshooting

This section addresses common issues and error codes you might encounter.

7.1 LED Display Error Codes

The LED display will show specific codes to indicate protection modes:

• LO (Low Voltage Protection): The input DC voltage is too low (below 9.5V±0.5VDC). This indicates the battery needs charging or is discharged. The inverter will shut down to protect the battery.
• OH (Overheat Protection): The inverter's internal temperature is too high (around 149°F / 65°C). This can be caused by insufficient ventilation or prolonged high-power operation. Allow the inverter to cool down and ensure proper airflow.
• HI (Overvoltage Protection): The input DC voltage is too high (above 16V±0.5VDC). Check the battery charging system or ensure the correct 12V battery is used.
• OL (Output Overload or Short-Circuit Protection): The connected load exceeds the inverter's rated power (2200W) or there is a short circuit in the output. Disconnect some appliances or check for short circuits. The inverter will shut down to prevent damage.

7.2 General Troubleshooting Tips

• No Power Output: Check battery connections for tightness and corrosion. Ensure the inverter is switched ON. Verify battery voltage is within the operating range (9.8V-16V DC).
• Appliance Not Working: Ensure the appliance's wattage does not exceed the inverter's capacity. Test the appliance with a standard AC outlet to confirm it is functional.
• Intermittent Operation: Check for loose battery connections. Ensure the battery is fully charged and capable of supplying the required current.

8. Specifications

9. Warranty and Support

GIANDEL provides a 3-year warranty for the Pure Sine Wave Power Inverter 2200W. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any inquiries regarding your product, please refer to the contact information provided with your purchase documentation or visit the official GIANDEL website.