Introduction
This manual provides comprehensive instructions for the Elekpia ONC50UB18C05 remote control. It covers setup, operation, and troubleshooting to ensure optimal use with your compatible ONN 4K Ultra HD UHD LED TV.
Product Overview
The Elekpia ONC50UB18C05 is a replacement remote control designed for various ONN 4K Ultra HD UHD LED TV models. It functions immediately upon battery insertion, requiring no additional programming.
Figure 1: Elekpia ONC50UB18C05 Remote Control. This image displays the full layout of the remote control, showing all buttons and their labels.
Setup
- Battery Installation: Locate the battery compartment on the back of the remote control.
- Insert two AAA batteries (not included), ensuring correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
- Initial Use: The remote control is pre-programmed and ready for use with compatible ONN TVs immediately after battery installation. No additional setup or pairing is required.
Operating Instructions
This section details the functions of each button on the Elekpia ONC50UB18C05 remote control.
Power and Input Controls
- Power: Turns the TV on or off.
- INPUT: Cycles through available input sources (HDMI, AV, TV, Media).
- HDMI: Selects the HDMI input source directly.
- AV: Selects the AV input source directly.
- MEDIA: Selects the Media input source directly.
- TV: Selects the TV tuner input source directly.
Number and Channel Controls
- 0-9: Direct channel selection.
- .: Used for entering sub-channels (e.g., 7.1).
- LAST CH: Returns to the previously viewed channel.
- CH ▲ / ▼: Changes the channel up or down.
- CH LIST: Displays the channel list.
- FAV: Accesses favorite channels.
Volume and Audio Controls
- VOL + / -: Increases or decreases the volume.
- MUTE: Mutes or unmutes the TV audio.
- SOUND: Accesses sound settings.
- SAP/MTS: Selects Secondary Audio Program (SAP) or Multi-channel Television Sound (MTS) options.
Navigation and Menu Controls
- MENU: Opens the TV's main menu.
- ▲ / ▼ / ◀ / ▶ (Arrow Buttons): Navigates through menu options.
- OK: Confirms a selection in the menu.
- BACK: Returns to the previous menu or screen.
- EXIT: Closes the current menu or function.
- INFO: Displays current program information.
- GUIDE: Opens the electronic program guide.
Special Functions
- PICTURE: Accesses picture settings.
- FREEZE: Pauses the current image on screen.
- SLEEP: Sets the sleep timer.
- ASPECT: Changes the screen aspect ratio.
- TTS: Activates or deactivates Text-to-Speech.
- CCD: Activates or deactivates Closed Captioning.
Media Playback Controls
- ⏮ (Previous Track): Skips to the beginning of the current track or the previous track.
- ▶ (Play): Starts playback.
- ⏸ (Pause): Pauses playback.
- ⏭ (Next Track): Skips to the next track.
- ■ (Stop): Stops playback.
Compatibility
This remote control is compatible with the following ONN 4K Ultra HD UHD LED TV models:
- ONC50UB18C05
- ONA50UB19E05
- ONA65UB19E07
- ONA50UB19E09
- ONA43UB19E04
- ONA24HB19E02
- ONA32HB19E03
- ONA55UB19E06
Note: This list may not be exhaustive. If your ONN TV model is not listed, please refer to your TV's original manual or contact customer support for compatibility verification.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA).
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote control and the TV's infrared sensor.
- Verify that the remote control is pointed directly at the TV's sensor.
- Some buttons not working:
- Clean the remote control, especially around the unresponsive buttons, to remove any dirt or debris.
- Ensure the remote is compatible with your specific TV model (refer to the Compatibility section).
Specifications
- Model Number: ONC50UB18C05
- Brand: Elekpia
- Product Dimensions: 6.7 x 1.8 x 0.7 inches
- Item Weight: 2.22 ounces
- Connectivity Technology: Infrared
- Compatible Devices: Television
- Max Number of Supported Devices: 1
- Special Feature: Ergonomic
Warranty Information
Specific warranty information for this product is not provided in the available documentation. Please refer to the retailer's return policy or contact the manufacturer, Elekpia, for details regarding warranty coverage.
Customer Support
For further assistance or inquiries, please contact your product retailer or the manufacturer, Elekpia. Contact information may be available on the product packaging or the manufacturer's official website.