SupplySource 14V AC/DC Adapter Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and efficient use of your SupplySource 14V AC/DC Adapter. This adapter is designed as a replacement power supply for the Motorola WPLN4243A IMPRES Rapid Charging Cradle Station, compatible with various Motorola XPR series radios including XPR6100, XPR6300, XPR6350, XPR6500, XPR6550, and XPR6580. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

To ensure safe operation and prevent damage to the adapter or connected devices, please observe the following safety precautions:

• Compatibility Check: Before connecting, verify that the DC output voltage and tip size of this adapter match the requirements of your Motorola WPLN4243A charging cradle and radio model. Incorrect voltage or tip size can cause severe damage.
• Ventilation: When using the adapter for extended periods, ensure it is placed in a well-ventilated area. Avoid covering the adapter or placing it in enclosed spaces to prevent overheating.
• Humidity: Keep the adapter away from excessive humidity and moisture. Do not use it in wet environments.
• Placement: Do not place the adapter on soft surfaces like carpets or bedding, which can obstruct ventilation. Avoid placing it on skin products or other materials that may retain heat.
• Power Cord: Inspect the power cord regularly for any signs of damage. Do not use if the cord is frayed or damaged.
• Protection Features: This adapter includes built-in safety features suchs as protection against incorrect voltage, short circuits, and internal overheating. However, proper usage is still crucial.
• Indoor Use Only: This adapter is designed for indoor use only.

3. Package Contents

Upon unpacking, please ensure all items listed below are present and in good condition:

• 1 x SupplySource 14V AC/DC Adapter
• 1 x Power Cable (11FT)

4. Setup Instructions

Follow these steps to set up your AC/DC adapter:

1. Unpack: Carefully remove the adapter and power cable from their packaging.
2. Connect Power Cable: Insert the female end of the 11FT power cable into the AC input port on the adapter. Ensure a firm connection.
3. Connect to Charging Cradle: Plug the DC output barrel connector of the adapter into the power input port of your Motorola WPLN4243A IMPRES Rapid Charging Cradle Station.
4. Connect to Power Outlet: Plug the male end of the 11FT power cable into a standard 100-240V AC wall outlet.
5. Verify Connection: Once connected, the charging cradle should receive power, indicated by its power indicator light (refer to your cradle's manual for specific indications).

Figure 1: Overview of the SupplySource 14V AC/DC Adapter. The image highlights the internal components for stable output voltage and protection, the high-quality copper core power cord for durability, and the flame-retardant ABS and PC synthetic shell for strength and wear resistance.

5. Operating Instructions

Once the adapter is properly connected to the Motorola WPLN4243A IMPRES Rapid Charging Cradle Station and a power outlet, it is ready for use:

1. Place Radio: Carefully place your compatible Motorola XPR series radio into the charging slot of the cradle.
2. Charging Indicator: Observe the charging indicator on your cradle and/or radio to confirm that charging has begun. Refer to your radio and cradle manuals for specific charging status indications.
3. Remove Radio: Once the radio is fully charged, remove it from the cradle.
4. Disconnecting Power: To disconnect power, first unplug the adapter from the wall outlet, then disconnect it from the charging cradle.

6. Maintenance

Proper maintenance ensures the longevity and reliable performance of your adapter:

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cable Care: Avoid bending or crimping the power cable excessively. Do not place heavy objects on the cable.
• Ventilation: Always ensure adequate ventilation during operation to prevent heat buildup.

7. Troubleshooting

If you encounter issues with your adapter, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact SupplySource customer support.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact SupplySource directly through their official channels or the retailer from whom the product was purchased. Please have your product model number (WPLN4243A compatible adapter) and purchase details ready when contacting support.