Trevi XT 10A8 BT Wireless Speaker Instruction Manual

Introduction

This manual provides essential information for the safe and efficient operation of your Trevi XT 10A8 BT Wireless Speaker. Please read this manual thoroughly before using the product and retain it for future reference. The Trevi XT 10A8 BT is a 2.1 all-in-one sound amplifier system designed for music, dialogue, and sound effects, offering versatile connectivity options including Bluetooth, USB, SD card, and AUX-in.

Safety Information

To ensure safe operation and prevent damage, please observe the following precautions:

• Do not expose the speaker to rain, moisture, or extreme temperatures.
• Do not block any ventilation openings.
• Do not place the speaker near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.
• Ensure the power supply matches the voltage specified on the product label (230 V ~ 50 Hz).

Package Contents

Verify that all items are present in the package:

• Trevi XT 10A8 BT Wireless Speaker Unit
• Remote Control
• User Manual (this document)
• Instruction Manual
• Warranty Certificate
• Power Cable

Product Overview

Familiarize yourself with the components and controls of your Trevi XT 10A8 BT Wireless Speaker.

Figure 1: Front view of the Trevi XT 10A8 BT Wireless Speaker, showcasing its tall, wood-colored cabinet with multiple speaker drivers and a bass port.

Figure 2: Close-up of the top control panel, featuring the main volume knob, mode selection buttons, USB and SD card slots, and a USB charging port.

Main Components:

• Speaker Drivers: Two 3-inch front speakers, one 3-inch passive speaker, and one 5-inch subwoofer for comprehensive sound.
• Top Control Panel: Houses main controls, LED display, and input ports.
• USB Port: For MP3 playback from flash memory and 5V 1A charging of external devices.
• SD Card Slot: For MP3 playback from SD cards.
• AUX IN Ports: Two auxiliary input ports for wired audio connections.
• Remote Control: For convenient operation from a distance.
• Top Stand: Integrated stand for placing tablets or smartphones.

Setup

Follow these steps to set up your Trevi XT 10A8 BT Wireless Speaker:

1. Unpacking: Carefully remove the speaker and all accessories from the packaging.
2. Placement: Place the speaker on a stable, flat surface. Ensure there is adequate ventilation around the unit. The integrated top stand can be used to hold a tablet or smartphone.
3. Power Connection: Connect the power cable to the AC input on the back of the speaker and then plug it into a standard 230V ~ 50Hz wall outlet.
4. Initial Power On: Press the Power button on the top control panel or the remote control to turn on the speaker. The LED display will illuminate.

Operating Instructions

Power On/Off:

• Press the Power button on the top panel or remote control to turn the unit on or off.

Volume Control:

• Rotate the large knob on the top panel clockwise to increase volume and counter-clockwise to decrease.
• Alternatively, use the Volume + and Volume - buttons on the remote control.

Mode Selection:

Press the MODE button on the top panel or remote control to cycle through available input modes: Bluetooth, USB, SD, AUX. The selected mode will be shown on the LED display.

Bluetooth Connection:

1. Select Bluetooth mode using the MODE button. The LED display will show "BT" and flash, indicating pairing mode.
2. On your smartphone, tablet, or PC, enable Bluetooth and search for available devices.
3. Select "TREVI XT 10A8 BT" from the list of devices.
4. Once paired, the "BT" indicator will stop flashing, and you can play audio wirelessly through the speaker.

USB/SD Card Playback:

1. Insert a USB flash drive into the USB port or an SD card into the CARD slot on the top panel.
2. The speaker will automatically switch to USB or SD mode and begin playing MP3 files. If not, press the MODE button to select the correct input.
3. Use the PREV (previous), NEXT (next), and PLAY/PAUSE buttons on the top panel or remote control to manage playback.

AUX-in Connection:

1. Connect an external audio device (e.g., MP3 player, TV) to one of the AUX IN ports using a compatible audio cable (not included).
2. Press the MODE button to select AUX mode.
3. Audio from the connected device will now play through the speaker. Control playback from the external device.

USB Charging:

• The USB CHARGE port (5V 1A) can be used to charge external devices like smartphones or tablets while they are placed on the top stand.

Maintenance

Proper care will ensure the longevity of your speaker.

• Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Do not use liquid cleaners or aerosol sprays.
• Storage: If storing the speaker for an extended period, unplug it from the power outlet and store it in a cool, dry place.
• Ventilation: Ensure that the speaker's ventilation openings are not blocked to prevent overheating.

Troubleshooting

If you encounter issues with your speaker, refer to the following table for common problems and solutions.

Specifications

Warranty and Support

Your Trevi XT 10A8 BT Wireless Speaker comes with a warranty certificate included in the package. Please refer to this document for detailed warranty terms and conditions.

For technical support, service, or inquiries, please contact Trevi customer service. Contact information can typically be found on the warranty certificate or the official Trevi website.

Manufacturer: Trevi
ASIN: B07ZH1SXDZ