Introduction
This manual provides essential information for the proper use and maintenance of your replacement remote control for various Haier Air Conditioner models. This remote is designed to replace your original unit. Please note that while it functions as a replacement, it may not support all functions of your original remote control.
Before use, ensure that this remote control is compatible with your specific air conditioner model. Refer to the list of compatible models provided in the product title.
Package Contents
- 1 x Replacement Remote Control Unit
Note: Batteries are not included and must be purchased separately.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 1: Rear view of the remote control with the battery cover removed, illustrating the correct orientation for inserting two AAA batteries.
Once batteries are installed, the remote control is ready for use. No pairing or programming is typically required for this replacement unit.
Operating Instructions
Point the remote control directly at the air conditioner's receiver window. Ensure there are no obstructions between the remote and the air conditioner.
Figure 2: Front view of the remote control, displaying the LCD screen and various function buttons.
Button Functions
| Button Label (Russian) | English Translation | Function |
|---|---|---|
| ☐ (Power Symbol) | Power On/Off | Turns the air conditioner unit on or off. |
| Тихий/Турбо | Quiet/Turbo | Toggles between quiet operation mode and turbo cooling/heating mode. |
| ХОЛОД | COOL | Activates cooling mode. |
| ТЕПЛО | HEAT | Activates heating mode. |
| ОСУШ | DRY | Activates dehumidification mode. |
| ТЕМП+ | TEMP+ | Increases the set temperature. |
| ТЕМП- | TEMP- | Decreases the set temperature. |
| АВТО | AUTO | Sets the air conditioner to automatic mode, adjusting operation based on room temperature. |
| ☸ (Fan Symbol) | Fan Speed | Adjusts the fan speed. |
| ЖАЛЮЗИ | SWING (Louver) | Controls the vertical swing of the air louvers. |
| HEALTH | HEALTH | Activates health-related functions (e.g., air purification, ionizer), if supported by the AC unit. |
| СОН | SLEEP | Activates sleep mode, which adjusts temperature gradually for comfortable sleep. |
| СПЕЦ ФУНКЦИИ | SPECIAL FUNCTIONS | Accesses additional special functions, if available. |
| ТАЙМЕР ВКЛ. | TIMER ON | Sets a timer for the air conditioner to turn on. |
| ТАЙМЕР ВЫКЛ. | TIMER OFF | Sets a timer for the air conditioner to turn off. |
| ПОДТВ ОТМЕНА | CONFIRM CANCEL | Confirms or cancels timer settings or other operations. |
| БЛОК | LOCK | Locks the remote control buttons to prevent accidental changes. |
| ПОДСВЕТКА | BACKLIGHT | Activates the backlight for the LCD screen. |
| СБРОС | RESET | Resets the remote control to default settings. |
Maintenance
Battery Replacement
Replace batteries when the remote control's range decreases or the display becomes dim. Always replace both batteries simultaneously with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.
Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. | Dead or incorrectly inserted batteries. | Replace batteries with new ones, ensuring correct polarity. |
| Remote control range is poor. | Weak batteries; obstruction between remote and AC unit. | Replace batteries. Ensure clear line of sight to the AC unit's receiver. |
| Certain functions do not work. | The replacement remote may not support all original functions; AC unit does not support the function. | This is expected for some replacement remotes. Verify if your AC unit supports the specific function. |
| Display is dim or blank. | Low battery power. | Replace batteries. |
Specifications
- Brand: Easytry123
- Compatible Devices: Haier Air Conditioners (Specific models listed in title)
- Connectivity Technology: Infrared
- Controller Type: Button Control
- Special Feature: Ergonomic
- Power Source: 2 x AAA Batteries (not included)
- Country of Origin: China
Warranty and Support
Specific warranty information for this replacement remote control is not provided in the product details. For any issues or support inquiries, please contact the seller directly through the platform where the purchase was made.
Seller: Easytry123
Please retain your purchase receipt or order details for any support requests.