1. Product Overview
The Locinox Lion Hydraulic Gate Closer is designed to provide controlled and reliable self-closing functionality for gates. This non-handed unit is suitable for a wide range of applications, offering a 180-degree opening angle and robust weather-resistant construction.
Key Features:
- Hydraulic self-closing mechanism for smooth operation.
- Accommodates a 180-degree opening angle.
- Suitable for gates weighing up to 75 kg.
- Designed for quick and easy installation.
- Constructed with weather-resistant materials for durability.
- Non-handed design allows for versatile installation on left or right-hand gates.
Figure 1: Components of the Locinox Lion Hydraulic Gate Closer. This image displays the main cylindrical hydraulic closer unit, a shorter mounting arm, and a longer mounting arm, all finished in black.
2. Safety Information
Please read and understand all instructions before installation and operation. Failure to follow these instructions may result in injury or damage to the product or property.
- Always wear appropriate personal protective equipment (PPE) during installation, such as safety glasses and gloves.
- Ensure the gate is securely supported before beginning installation to prevent accidental movement.
- Be aware of potential pinch points when the gate is in motion or during closer adjustment.
- Do not attempt to modify the hydraulic closer. Unauthorized modifications can compromise safety and performance.
- Keep children and pets away from the gate area during installation and operation.
- Verify that all fasteners are tightened securely after installation.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, contact your supplier immediately.
- 1x Locinox Lion Hydraulic Gate Closer Unit
- Mounting Arms/Brackets (quantity may vary based on specific kit)
- Fasteners (screws, bolts, etc. for screw-in installation)
- Installation Template (if included)
- Instruction Manual (this document)
4. Setup and Installation
The Locinox Lion Hydraulic Gate Closer is designed for screw-in installation and is non-handed, allowing for flexible mounting. Proper installation is crucial for optimal performance and longevity.
- Prepare the Gate and Post: Ensure the gate and gate post are structurally sound and capable of supporting the closer. Clean the mounting surfaces.
- Determine Mounting Position: Identify the optimal position for the closer unit and mounting arms. Consider the gate's opening angle (up to 180 degrees) and ensure no obstructions.
- Mark Drilling Points: Use the provided template (if applicable) or measure carefully to mark the drilling points for the closer unit and mounting arms on both the gate and the post.
- Drill Pilot Holes: Drill pilot holes of the appropriate size for the fasteners.
- Mount the Closer Unit: Securely attach the main hydraulic closer unit to the gate post using the provided fasteners.
- Attach Mounting Arms: Connect the mounting arms to the closer unit and then securely fasten them to the gate. Ensure all connections are tight.
- Initial Adjustment: With the closer installed, slowly open and close the gate to observe its movement. The closer may require initial adjustment to achieve the desired closing speed and force. Refer to the operating instructions for adjustment procedures.
- Final Check: Verify that the gate closes smoothly and completely without slamming or excessive resistance. Check all fasteners for tightness.
5. Operating Instructions
The Locinox Lion Hydraulic Gate Closer automatically closes your gate after it has been opened. The closing speed and final snap can typically be adjusted to suit your specific requirements.
Adjusting Closing Speed:
The closer features adjustment valves (usually small screws) that control the flow of hydraulic fluid, thereby regulating the closing speed. Locate these adjustment points on the closer unit.
- To Decrease Closing Speed (Slower): Turn the adjustment screw(s) clockwise in small increments.
- To Increase Closing Speed (Faster): Turn the adjustment screw(s) counter-clockwise in small increments.
Important: Make small adjustments and test the gate's closing action after each adjustment. Over-tightening or loosening adjustment screws excessively can damage the closer. Ensure the gate closes fully and latches without excessive force.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Locinox Lion Hydraulic Gate Closer. This weather-resistant unit requires minimal but consistent care.
- Cleaning: Periodically clean the exterior of the closer unit and mounting arms with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners.
- Inspection: Annually inspect all mounting screws and bolts for tightness. Re-tighten if necessary. Check for any signs of wear, corrosion, or damage to the closer body or arms.
- Operation Check: Regularly observe the gate's closing action. If the speed changes significantly or the gate does not close smoothly, refer to the troubleshooting section or re-adjust the closing speed.
- Lubrication: The hydraulic mechanism is sealed and generally does not require internal lubrication. However, external pivot points on the mounting arms may benefit from a light application of a suitable lubricant (e.g., silicone spray) if they show signs of stiffness.
7. Troubleshooting
This section addresses common issues you might encounter with your hydraulic gate closer.
| Problem | Possible Cause | Solution |
|---|---|---|
| Gate not closing fully or too slowly. | Closing speed set too slow; gate hinges stiff; gate obstruction; closer losing hydraulic pressure. | Increase closing speed (turn adjustment screw counter-clockwise). Lubricate gate hinges. Remove obstructions. If closer is losing pressure, it may require replacement. |
| Gate slamming shut or closing too fast. | Closing speed set too fast. | Decrease closing speed (turn adjustment screw clockwise). |
| Gate makes squeaking noises. | Dry or worn gate hinges; dry pivot points on closer arms. | Lubricate gate hinges and closer arm pivot points with a suitable lubricant. |
| Closer appears damaged or leaking fluid. | Physical damage; internal seal failure. | Discontinue use immediately. Contact customer support for replacement. Do not attempt to repair. |
8. Specifications
| Model Number | L30708 |
| Brand | Locinox |
| Material | Metal |
| Color | Black |
| Installation Type | Screw-In |
| Maximum Gate Weight | 75 kg (165 lbs) |
| Maximum Opening Angle | 180 degrees |
| Recommended Uses | Residential, Commercial |
| Weather Resistance | Yes |
9. Warranty and Support
For specific warranty information, please refer to the documentation provided with your purchase or visit the official Locinox website. If you encounter any issues or require technical assistance, please contact Locinox customer support or your authorized dealer.
When contacting support, please have your product model number (L30708) and purchase date readily available.
