DUNCHATY 14-inch 3-Smile Jack-O'-Lantern Halloween Pumpkin Decoration

Introduction

This manual provides essential instructions for the safe and effective use of your DUNCHATY 14-inch 3-Smile Jack-O'-Lantern Halloween Pumpkin Decoration. This lighted decoration features a stacked pumpkin design with three distinct carved faces, an integrated LED bulb, and durable plastic construction suitable for both indoor and outdoor display. Please read all instructions carefully before setup and operation.

Safety Information

Your safety is paramount. Please observe the following precautions:

• This product is ETL certified, ensuring it meets recognized safety standards.
• The power cord includes two extra fuses for protection against electrical surges.
• The decoration is weather-resistant, making it suitable for outdoor use. However, avoid submerging the unit in water.
• Always unplug the decoration from the power outlet when not in use, during bulb or fuse replacement, or before cleaning.
• Regularly inspect the power cord and bulb for any signs of damage. Do not use if damaged.
• Keep electrical cords away from high-traffic areas to prevent tripping hazards.

Setup

1. Carefully remove the DUNCHATY Jack-O'-Lantern from its packaging.
2. Place the decoration on a stable, flat surface where it will not be easily knocked over. Ensure the power cord can reach a suitable electrical outlet without tension.
3. For outdoor use, position the decoration in an area that allows for proper drainage and minimizes direct exposure to extreme weather conditions, despite its weather-resistant design.
4. Plug the power cord into a standard 120V AC electrical outlet. The decoration will illuminate upon connection.

Operating Instructions

The DUNCHATY Jack-O'-Lantern is designed for simple operation:

• To turn the decoration on, plug the power cord into a functional electrical outlet.
• To turn the decoration off, unplug the power cord from the electrical outlet. This model does not feature an integrated on/off switch on the cord.

Maintenance

Cleaning

To maintain the appearance of your decoration:

• Ensure the unit is unplugged before cleaning.
• Wipe the surface with a soft, dry, or slightly damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.

Bulb Replacement

If the light stops working, the bulb may need replacement:

1. Unplug the decoration from the power source.
2. Locate the bulb access point, typically at the back or bottom of the pumpkin.
3. Carefully twist and pull out the old tungsten bulb.
4. Insert a new standard interface tungsten bulb, ensuring it is securely seated.
5. Plug the decoration back in to test the new bulb.

Fuse Replacement

If the decoration does not light up after replacing the bulb, the fuse may be blown:

1. Unplug the decoration from the power source.
2. Locate the fuse compartment on the plug (usually a small sliding door).
3. Open the compartment and carefully remove the old fuse.
4. Insert one of the two included extra fuses into the compartment.
5. Close the fuse compartment and plug the decoration back in to test.

Troubleshooting

Specifications

• Brand: DUNCHATY
• Model Number: 7SZJQ-2-14IN-3TER13-6-HLOWJKL
• Product Dimensions (L x W x H): 9.25 x 8.46 x 14.17 inches
• Item Weight: 10.4 ounces
• Material: Plastic
• Light Color: Orange
• Number of Light Sources: 1
• Power Cord Length: 3 feet
• Safety Certification: ETL Certified
• UPC: 791319824028

Warranty and Support

Specific warranty information for this product is not provided in the available documentation. For any questions regarding product operation, maintenance, or potential defects, please refer to the retailer's return policy or contact DUNCHATY customer support through their official channels or the platform where the product was purchased.