Introduction
Thank you for choosing the LEPOWER 50W LED Work Light. This manual provides essential information for the safe and efficient operation of your new work light. The LEPOWER 50W LED Work Light is designed to provide bright, energy-efficient illumination for various indoor and outdoor applications. Featuring 5000 lumens of brightness and an IP66 waterproof rating, it is a versatile lighting solution for workshops, garages, construction sites, and more. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
Always follow basic safety precautions when using electrical products to reduce the risk of fire, electric shock, and personal injury.
- Do not look directly into the illuminated light. The high brightness can cause eye strain or temporary vision impairment.
- Ensure the power supply voltage matches the product's requirements (120 Volts).
- Do not disassemble or modify the light. This may void the warranty and pose safety risks.
- Keep the light away from flammable materials.
- Always unplug the light from the power source before cleaning or performing any maintenance.
- If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid hazards.
- Ensure the light is placed on a stable, level surface to prevent tipping.
Product Overview
The LEPOWER 50W LED Work Light is designed for durability and performance. Key features include:
- High Brightness: Produces up to 5000 lumens of 6000K white light.
- Energy Efficient: Replaces 250W halogen lights, saving over 80% on electricity.
- Durable Construction: Made with die-cast aluminum housing and tempered glass for excellent heat dissipation and resilience.
- IP66 Waterproof: Suitable for outdoor use, resistant to wind, rain, and sand.
- Adjustable Design: Rotates 360° horizontally and 180° vertically for flexible positioning.
- Long Lifespan: LED beads provide a service life of up to 30,000 hours.
Setup
The LEPOWER 50W LED Work Light comes largely pre-assembled. Follow these steps for initial setup:
- Unpack: Carefully remove the work light and all packaging materials from the box.
- Positioning: Place the work light on a stable, flat surface. Ensure the stand is fully extended and secure.
- Adjust Angle: Loosen the adjustable knobs on the sides of the light fixture. Adjust the light head to the desired vertical angle (up to 180°). Tighten the knobs to secure the position. The entire light can also be rotated 360° horizontally on its stand.
- Connect Power: Plug the power cord into a standard 120V AC electrical outlet. The power switch is located on the cord, approximately one foot from the plug.
Operating Instructions
Using your LEPOWER 50W LED Work Light is straightforward:
- Power On/Off: Locate the toggle switch on the power cord. Flip the switch to the "ON" position to illuminate the light. Flip it to the "OFF" position to turn the light off.
- Adjust Illumination Angle: If needed, re-adjust the light head's angle by loosening the side knobs, positioning the light, and then tightening the knobs.
- Placement for Optimal Lighting: For wide area illumination, position the light to utilize its 120° beam angle. For specific tasks, adjust the light closer and direct it precisely.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your work light.
- Cleaning: Before cleaning, ensure the light is unplugged and cool. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the light in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the power cord for any signs of damage. If damage is found, discontinue use and contact customer support.
- Water Resistance: While IP66 rated, avoid submerging the light in water. Ensure the power plug and switch are kept dry during outdoor use.
Troubleshooting
If you encounter issues with your LEPOWER 50W LED Work Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Power switch is off. Damaged power cord. | Check if the plug is securely inserted into a working outlet. Ensure the power switch on the cord is in the "ON" position. Inspect the power cord for visible damage. If damaged, do not use and contact customer support. |
| Light flickers or dims. | Unstable power supply. Loose connection. | Try plugging the light into a different outlet. Ensure all connections are secure. |
| Light gets excessively hot. | Poor ventilation. Obstruction of heat dissipation fins. | Ensure the light is in an area with adequate airflow. Check that the heat dissipation fins on the back of the light are not blocked by debris or other objects. |
If the problem persists after trying these solutions, please contact LEPOWER customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | WL-50W |
| Wattage | 50 Watts |
| Luminous Flux | 5000 Lumens |
| Color Temperature | 6000K (White Light) |
| Input Voltage | 120 Volts AC |
| Beam Angle | 120° |
| IP Rating | IP66 Waterproof |
| Material | Die-cast Aluminum, Tempered Glass |
| Lifespan | Up to 30,000 Hours |
| Dimensions (L x W x H) | 8.8 x 6.8 x 11.6 inches |
| Item Weight | 3.56 pounds |
| Power Source | Corded Electric |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official LEPOWER website. If you have any questions or require assistance with your LEPOWER 50W LED Work Light, please contact LEPOWER customer service directly.
You can also visit the LEPOWER Store on Amazon for more product information and support resources.
