Wood Trick AR-T

Wood Trick Gun AR-T 3D Wooden Puzzle Instruction Manual

Model: AR-T | Brand: Wood Trick

Introduction

Thank you for choosing the Wood Trick Gun AR-T 3D Wooden Puzzle. This mechanical model kit offers an engaging and educational building experience, culminating in a functional wooden toy gun capable of shooting wooden bullets. Crafted entirely from natural wood, this model requires no glue for assembly, relying on precise interlocking pieces and mechanical principles. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building process.

Assembled Wood Trick Gun AR-T 3D Wooden Puzzle

Image: The fully assembled Wood Trick Gun AR-T, showcasing its intricate wooden design and functional components.

What's in the Box

Your Wood Trick Gun AR-T 3D Wooden Puzzle kit includes the following components:

  • Gun AR-T 3D wooden model kit (496 pieces)
  • Illustrated step-by-step instructions with hints in English
  • 12 wooden bullets
  • Elastic bands (for firing mechanism)
  • Toothpicks (for assembly)
All components of the Wood Trick Gun AR-T kit laid out

Image: All individual wooden sheets, elastic bands, and the instruction manual included in the Wood Trick Gun AR-T kit.

Assembly Instructions

This model is designed for experienced DIY hobbyists and typically takes 5-6 hours to assemble. Follow the illustrated, step-by-step instructions provided in your kit carefully. No glue is required; pieces interlock precisely.

General Assembly Tips:

  • Carefully detach pieces from the wooden sheets. Use a small tool if necessary to avoid breakage.
  • Refer to the numbered diagrams in the instruction booklet for correct placement of each piece.
  • Ensure all connections are snug but do not force pieces, as this may cause damage.
  • Use the provided toothpicks to secure certain joints as indicated in the instructions.

Key Assembly Steps:

  1. Main Body Construction: Begin by assembling the core frame of the gun. Pay close attention to the alignment of the side panels and internal mechanisms.
    2. Diagram showing assembly of the main body of the wooden gun puzzle

    Image: A diagram illustrating the initial steps of assembling the main body of the AR-T model, highlighting interlocking parts.

  2. Telescoping Buttstock: Assemble the buttstock components. This part is designed to extend and retract.
    3. Wood Trick Gun AR-T with telescoping buttstock extended and retracted

    Image: The wooden AR-T model demonstrating its telescoping buttstock in both extended and retracted positions.

  3. Optical Sight: Construct the optical sight and attach it to the top rail. This sight is adjustable.
    4. Close-up of the adjustable optical sight on the Wood Trick Gun AR-T

    Image: A detailed view of the adjustable optical sight, showing its intricate wooden construction.

  4. Magazine and Bullet Clip: Assemble the 12-round detachable magazine and the wooden bullets.
    5. Wood Trick Gun AR-T with magazine and wooden bullets

    Image: The wooden AR-T model with its detachable magazine and several wooden bullets, ready for loading.

  5. Trigger Mechanism: Carefully assemble the trigger and firing mechanism, incorporating the elastic bands as instructed.
    6. Close-up of the trigger mechanism on the Wood Trick Gun AR-T

    Image: A close-up of the trigger and surrounding mechanical details of the wooden gun.

  6. Accessory Holder: Attach the small holder at the front, designed for a laser pointer or flashlight (not included).
    7. Wood Trick Gun AR-T with accessory holder for laser or flashlight

    Image: The wooden AR-T model featuring the accessory holder located beneath the barrel, suitable for attaching a laser or flashlight.

Assembly Overview Video:

Video: An official overview by Wood Trick demonstrating the assembly process and key features of the Assault Gun AR-T model.

Operating Instructions

Once assembled, your Wood Trick Gun AR-T is ready for use. It can shoot wooden bullets up to 26 feet.

Loading the Magazine:

  1. Remove the magazine from the gun.
  2. Insert up to 12 wooden bullets into the magazine.
  3. Reinsert the loaded magazine into the gun until it clicks securely into place.
Person loading the magazine of the Wood Trick Gun AR-T

Image: A person demonstrating how to load the detachable magazine with wooden bullets into the AR-T model.

Firing the Gun:

  1. Ensure the safety switch is disengaged (refer to the instruction manual for safety switch location).
  2. Pull back the charging handle to load a bullet into the chamber.
  3. Aim at a safe target.
  4. Pull the trigger to fire. The elastic bands power the mechanism.
Diagram showing safety switch position

Image: A diagram illustrating the safety switch mechanism on the wooden gun.

Safety Precautions:

  • Always aim in a safe direction, away from people and animals.
  • Do not aim at faces or eyes.
  • Use only the wooden bullets provided with the kit.
  • This product contains small parts and is not suitable for children under 14 years old due to choking hazard.

Maintenance

To ensure the longevity and optimal performance of your Wood Trick Gun AR-T, follow these simple maintenance guidelines:

  • Cleaning: Wipe the wooden surfaces with a dry, soft cloth to remove dust. Avoid using water or chemical cleaners, as they may damage the wood.
  • Storage: Store the model in a dry environment, away from direct sunlight and extreme temperatures, to prevent warping or damage to the wood.
  • Elastic Bands: The elastic bands may lose elasticity over time. Replace them if you notice a decrease in firing power. Use similar-sized elastic bands for replacement.
  • Loose Parts: Periodically check for any loose parts. If a piece becomes loose, re-secure it gently according to the assembly instructions.

Troubleshooting

If you encounter any issues with your Wood Trick Gun AR-T, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Gun does not fire or fires weakly.Elastic bands are worn out or incorrectly installed.Check elastic band placement. Replace old bands with new ones.
Bullets do not load properly.Magazine is not fully inserted or bullets are jammed.Ensure magazine is securely in place. Clear any jammed bullets.
Parts feel loose after assembly.Pieces not fully interlocked or toothpicks missing.Review assembly steps for the affected section. Ensure all pieces are snug and toothpicks are in place.

Specifications

  • Model: Gun AR-T
  • Brand: Wood Trick
  • Material: Sanded Plywood, Glued with Carbamide Resin
  • Number of Pieces: 496
  • Assembled Dimensions: 23.23 x 3.15 x 8.27 inches (590 x 80 x 210 mm)
  • Weight: 1.58 Kilograms
  • Recommended Age: 14+ years
  • Estimated Assembly Time: 5-6 hours
  • Shooting Range: Up to 26 feet
  • Magazine Capacity: 12 wooden bullets
  • Educational Objective: Creative Thinking, Logical, Problem Solving Skill

Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 14 years old.

  • Always supervise minors during assembly and play.
  • Do not modify the product in any way that could alter its intended function or safety.
  • Keep away from open flames or heat sources.
  • Dispose of packaging materials responsibly.

Warranty and Support

For any questions regarding assembly, missing parts, or product support, please contact Wood Trick customer service. Refer to the contact information provided in your product packaging or visit the official Wood Trick website.

Manufacturer Warranty: Please consult the product packaging or Wood Trick's official website for detailed warranty information.

Contact Information:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.