Introduction
This manual provides essential information for the proper use, care, and maintenance of your New York Hi-Viz Workwear H8311 ANSI Class 3 High Visibility Hooded Sweatshirt. Designed for environments requiring high visibility, this garment meets ANSI/ISEA 107-2015 Class 3 standards, ensuring enhanced safety for the wearer.
Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Product Overview
The H8311 High Visibility Hooded Sweatshirt is constructed from 100% polyester fabric, featuring a knit lining for comfort and warmth. It includes 2-inch wide reflective tape strategically placed for 360-degree visibility. The black bottom and lower sleeves are designed to conceal dirt in high-wear areas.
Figure 1: Front view of the H8311 sweatshirt, highlighting its high visibility design and ANSI Class 3 certification.
Figure 2: Detailed front view emphasizing the reflective strips for enhanced visibility.
Figure 3: Detailed back view emphasizing the reflective strips for enhanced visibility from behind.
Figure 4: Close-up details of the fabric, reflective tape, and the dirt-concealing black bottom design.
Setup
The H8311 sweatshirt is ready for use directly out of its packaging. No assembly is required.
- Initial Inspection: Before first use, inspect the garment for any signs of damage, loose threads, or defects in the reflective tape. Ensure all seams are intact.
- Sizing: Confirm the garment size is appropriate for the wearer to ensure full range of motion and proper fit over other clothing layers, if applicable. Refer to standard sizing charts if unsure.
- First Wash (Optional): While not strictly necessary before first use, washing the garment according to the care instructions may improve initial comfort.
Operating Instructions
This high-visibility sweatshirt is designed to make the wearer conspicuous in environments where visibility is critical, especially in low light conditions or against complex backgrounds.
- Wearing: Wear the sweatshirt as an outer layer or over appropriate base layers. Ensure the reflective strips are not obstructed by other clothing, equipment, or dirt.
- Visibility: For maximum visibility, ensure the garment is clean and the reflective materials are free from damage or excessive wear.
- Intended Use: This garment is intended for use in work environments requiring ANSI/ISEA 107-2015 Class 3 compliance, such as road construction, utility work, or emergency services.
- Hood Use: The integrated hood can be used for additional warmth or protection from elements. Ensure it does not impede peripheral vision when worn.
- Kangaroo Pocket: Utilize the front kangaroo pocket for hand warming or storing small, essential items.
Maintenance and Care
Proper care extends the life of your high-visibility garment and maintains its protective qualities. Follow these instructions carefully:
- Washing: Machine wash cold with like colors. Use a mild detergent. Do not use bleach or fabric softeners, as these can degrade the reflective material.
- Drying: Tumble dry low. Remove promptly. Do not iron the reflective tape directly. Air drying is recommended to preserve the integrity of the reflective material.
- Storage: Store the garment in a clean, dry place away from direct sunlight and extreme temperatures. Avoid folding reflective areas sharply to prevent cracking.
- Inspection: Regularly inspect the garment for tears, abrasions, or significant fading of the fluorescent material. Check the reflective tape for peeling, cracking, or loss of reflectivity. Replace the garment if its visibility properties are compromised.
Troubleshooting
This section addresses common concerns regarding the H8311 sweatshirt.
- Reduced Reflectivity:
- Ensure the garment is clean. Dirt and grime can significantly reduce reflectivity.
- Check for damage to the reflective tape. If the tape is cracked, peeled, or heavily abraded, the garment's protective function may be compromised and it should be replaced.
- Avoid using harsh chemicals or fabric softeners during washing, as these can degrade reflective properties over time.
- Fading of Fluorescent Material:
- Prolonged exposure to direct sunlight can cause fluorescent materials to fade. Store the garment properly when not in use.
- If fading is significant, the garment's daytime visibility may be reduced, and replacement is recommended.
- Garment Damage (Tears, Rips):
- Small tears in non-critical areas may be repaired if they do not affect the integrity of the reflective or fluorescent material.
- Any damage that compromises the reflective tape or large areas of the fluorescent fabric means the garment no longer meets ANSI standards and should be replaced immediately.
Specifications
| Feature | Detail |
|---|---|
| Model Number | H8311 |
| Compliance | ANSI/ISEA 107-2015 Class 3 |
| Material | 100% Polyester |
| Color | Orange with Black Bottom |
| Reflective Tape | 2-inch wide, high-visibility reflective strips |
| Lining | Knit Lining |
| Pockets | Kangaroo Pocket |
| Care Instructions | Machine Wash Cold, Tumble Dry Low. Do not bleach or use fabric softeners. |
| Closure Type | Lace Up (Hood Drawstring) |
| Manufacturer | RK Industries Group, Inc |
| UPC | 795853641431 |
Warranty Information
New York Hi-Viz Workwear products are manufactured to high-quality standards. This product is warranted against defects in materials and workmanship under normal use for a period typical of safety apparel. This warranty does not cover damage resulting from misuse, abuse, improper care, or normal wear and tear. For specific warranty claims, please retain your proof of purchase and contact customer support.
Customer Support
For further assistance, questions, or to report any issues with your H8311 High Visibility Hooded Sweatshirt, please contact New York Hi-Viz Workwear customer support through the retailer where the product was purchased or visit the manufacturer's official website for contact details.
Manufacturer: RK Industries Group, Inc
